Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"brake line flare kit" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Rubber Front Brake Lines & Fitting Kit, 7/16-20
    Rubber Front Brake Lines & Fitting Kit, 7/16-20
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips.

    • 18" lines including fittings
    • 3/8"-24 IFF and 7/16"-20

    Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips.

    • 15" length including fittings
    • 3/8"-24 IFF and 10mm-1.5
    • For 1978-1988 GM Calipers

    Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Park-Lok Hydraulic Brake
    $29.99
    Product Rating: 4.40 Stars
    Park-Lok Hydraulic Brake
    x
                

    Hydraulic line pressure keeps brake secure. No special linkage. Not recommended for use with silicone brake fluid or as an emergency brake. Features 1/8" NPT female on inlet/outlet.

    Device is generally used to lock the rear brakes. To set the lock, step on the brakes, push the lock knob down, and take your foot off the brake. To release the lock, step on the brake again slightly harder than before and it will release automatically.

    Hydraulic Parking Brake Instructions (PDF)

  • US Brake Steel Brake Line Kit
    US Brake Steel Brake Line Kit
    x
                Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines. 
            
  • Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    DOT Braided Stainless Brake Hoses, GM/Ford, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
    • Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes
  • DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    DOT Braided Stainless Brake Hoses, Mustang II, 7/16-24
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Adjustable Proportioning Valve Block, Brake Distribution System
    Adjustable Proportioning Valve Block, Brake Distribution System
    x
                

    Adjustable proportioning valve and distribution block with mounting bracket  all in one. Features a rotary adjustment to regulate rear brake pressure and help maintain correct brake bias between front and rear. Distribution block connects to master cylinder and distributes brake fluid to all four wheels. Includes two stainless steel 3/16" brake line,3/8 24 flare nut brake light switch. Also available in chrome.

    • Rotary adjustment to regulate rear brake pressure and help maintain correct brake bias between front and rear
    • Connects to master cylinder and distributes brake fluid to all four wheels
    • Includes:
      • Two stainless steel 3/16" brake line
      • 3/8" 24 flare nut brake light switch
    • Choose from Black or Chrome finish

    Instructions (PDF)

    Learn more about how adjustable proportioning valves work by reading our tech article. Brake System Selection.  

  • Speedway KSE Sprint Racing Wing Slider Kit
    Speedway KSE Sprint Racing Wing Slider Kit
    x
                Please view the product's page for more information
            
  • Speedway Sprint Racing Wing Slider Kit
    Speedway Sprint Racing Wing Slider Kit
    x
                Please view the product's page for more information
            
  • GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31366 Instructions (PDF)

  • GM Disc/Drum Proportioning Valve for 3/8-24 Outlets
    GM Disc/Drum Proportioning Valve for 3/8-24 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with front disc, rear drum brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31364 Instructions (PDF)

  • GM Disc/Disc Proportioning Valve for 1/2-20, 9/16-18 Outlets
    GM Disc/Disc Proportioning Valve for 1/2-20, 9/16-18 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 1/2"-20 and 9/16"-18 outlets.

    910-31352 Instructions (PDF)