Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"braided steel fuel hose" Page 1 of 3

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Stainless Steel Braided Hose, -12 AN
    From: $19.99
    Stainless Steel Braided Hose, -12 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Not to be used for brake or power steering applications.

    Note: This hose is not compatible with E85 or other Ethanol blended fuels.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Stainless Steel Braided Hose, -6 AN
    From: $11.99
    Product Rating: 5.00 Stars
    Stainless Steel Braided Hose, -6 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels. 

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels. 

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/32 Inch ID, -6 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 7/8 Inch ID, -16 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 7/8 Inch ID, -16 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 7/32 Inch ID, -4 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 7/32 Inch ID, -4 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-1/8 Inch ID, -20 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1-1/8 Inch ID, -20 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 500 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1-13/16 Inch ID, AN32
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Stainless Steel Braided Hose, -10 AN
    From: $16.99
    Stainless Steel Braided Hose, -10 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels.

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels.

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Stainless Steel Braided Hose, -8 AN
    From: $14.99
    Product Rating: 5.00 Stars
    Stainless Steel Braided Hose, -8 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels.

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels.

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    Aeroquip FBC0600 -6 AN TFE Braided High Pressure Hose, 11/32 Inch ID
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Sold by the foot and use with either crimp or reusable fittings to make your own custom power steering line.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    Aeroquip FCC0610 -6 AN TFE Braided Hi Pressure Hose, 11/32 In ID-10 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0603 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 3 Ft
    Aeroquip FCC0603 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 3 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    Aeroquip FCC0606 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 6 Ft
    x
                

     Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

    The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F 

    Use with either crimp or reusable fittings.

    Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.

    See part # 6172013 for correct fittings to use with this hose.

    Braided High Pressure Hose Chart Application (GIF)

    Fitting Thread Application Chart (GIF)

  • Garage Sale - Stainless Steel Braided Hose, -6 AN, 14.5 Feet
    Garage Sale
    Garage Sale - Stainless Steel Braided Hose, -6 AN, 14.5 Feet
    x
                

    This hose is garage sale priced because it is  14.5' cut in to 104" and 70" lengths.  Thes ends are frayed.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels. 

    Note:  This hose is not compatible with E85 or other Ethanol blended fuels. 

    Not to be used for brake or power steering applications. Maximum operating pressure

  • Garage Sale - Stainless Steel Braided Hose, -6 AN, 3 Foot Length
    Garage Sale
    Garage Sale - Stainless Steel Braided Hose, -6 AN, 3 Foot Length
    x
                Please view the product's page for more information
            
  • Speedway Carter Fuel Pump Fuel Line Kit
    Speedway Carter Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with stainless hose
    • Ss - aluminum fittings with blue hose
    • Stl - steel fittings with blue hose
  • Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    Speedway Edelbrock Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • Alu - aluminum fittings with blue rubber hose
    • Ss - aluminum fittings with stainless steel hose
    • Stl - steel fittings with blue rubber hose
  • Garage Sale - Speedway Stainless Steel Braided Line AN12, Fuel/Water/Air/Oil
    Garage Sale
    Garage Sale - Speedway Stainless Steel Braided Line AN12, Fuel/Water/Air/Oil
    x
                Please view the product's page for more information
            
  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Garage Sale - Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    Garage Sale
    Garage Sale - Aeroquip Stainless Steel Braided Low Pressure Hose, 7/16 Inch ID, -8 AN
    x
                Please view the product's page for more information
            
  • Garage Sale - Aeroquip Steel Braided Low Pressure Hose, -4 AN, 7/32 Inch
    Garage Sale
    Garage Sale - Aeroquip Steel Braided Low Pressure Hose, -4 AN, 7/32 Inch
    x
                Please view the product's page for more information
            
  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4246 Starlite Crimp Fitting, 120 Degree, -16 AN
    Aeroquip FBM4246 Starlite Crimp Fitting, 120 Degree, -16 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4245 Starlite Crimp Fitting, 120 Degree, -12 AN
    Aeroquip FBM4245 Starlite Crimp Fitting, 120 Degree, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4131 Starlite Crimp Fitting, 90 Degree, -4 AN
    Aeroquip FBM4131 Starlite Crimp Fitting, 90 Degree, -4 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3