Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"braided power steering pump hoses" Page 1 of 1

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Mustang II-GM Pump Power Steering Hose Kits
    Mustang II-GM Pump Power Steering Hose Kits
    x
                It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Our Mustang II/GM pump power steering hose assemblies are an inexpensive alternative to  the more costly stainless steel braided hose kits. The return hose included in this kit will  normally need to be cut to length.

    This has an adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting.

    This will work with the 1974-78 Mustang II power rack and pinion in conjunction with the suggested power steering pumps 910-32922-FORD and 910-32908-BLK. When using an early GM pump with Mustang II rack, you will also need flow reducer valve 910-32918. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together.
  • 5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
    x
                

    Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.

    Fitting 617-4830 fits our:

    • P/S pump # 91032922-GM
    • P/S pump # 91032908-BLK  
    • P/S pump # 91032908-CHR

    WARNING:  Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.

  • Garage Sale - PS Hoses 82-88 T-bird
    $89.99
    $129.99
    Garage Sale
    Garage Sale - PS Hoses 82-88 T-bird
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    This is Garage Sale priced because O-rings and fittings are not included, hoses and banjo bolt only.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS