Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"braided hose ends" Page 1 of 3

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Billet Specialties 67525 5/8 Inch Braided Hose Aluminum Hose End Cover
    Billet Specialties 67525 5/8 Inch Braided Hose Aluminum Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 5/8" braided hose (heater hose).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 3/8" braided hose (fuel line).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    Lokar KD-20C6HT Ford C6 Hi-Tech Kickdown Cable Kit-Stainless Housing
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Ford C6 Kickdown Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. These C6 transmission kickdowns feature a stainless steel braided housing and aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems.  Complete instructions included in kit.

    • For Ford C6 applications
    • Specially extruded liner for extended life of the cable
    • Aluminum fittings with ferrule to eliminate frayed cable ends
    • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
    • Complete instructions included

    Throttle Body and Carb End Fittings Guide (Link)

    49102060 Installation Instructions (PDF)

     

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 9/16 Inch ID, -10 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race fuel line applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    x
                

    Use in conjunction with Tube Seal™ Hose Ends. Duplicates the appearance of far more expensive stainless steel braided hose and fittings. Fits over 3/4" - 1-1/4" O.D. hose.

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.

  • Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    Stainless Braided 19 Inch Front Brake Hoses, 10mm-1.5
    x
                These steel braided front brake lines are 19" overall length. They are for common 1978-1988 GM metric style calipers and include 10mm x 1.5 banjo fittings for one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
            
  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    x
                

    This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

    Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

    Banjo bolts and crush washers are included. 

    One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
  • Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    x
                Please view the product's page for more information
            
  • Aeroquip FBU1600 Starlite Hose, -16 AN
    Aeroquip FBU1600 Starlite Hose, -16 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Fragola 602029 Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Black
    New
    Fragola 602029 Series 6000 P.T.F.E. Lined Hose, -10 AN, 20 FT Roll, Black
    x
                Please view the product's page for more information
            
  • Fragola 60126 Series 6000 PTFE Lined Hose, -6 AN, 10 FT Roll, Black
    New
    Fragola 60126 Series 6000 PTFE Lined Hose, -6 AN, 10 FT Roll, Black
    x
                Please view the product's page for more information
            
  • Aeroquip FBM1100 Straight High Pressure -3 AN TFE Hose End
    Aeroquip FBM1100 Straight High Pressure -3 AN TFE Hose End
    x
                Designed for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

    Works only with TFE stainless braided high pressure hose.

    Hose End Application Chart (GIF)

  • Wing Slider Braided Hose Kit
    $49.99
    Wing Slider Braided Hose Kit
    x
                New kit supplies you with hoses and fittings to plumb your valve to your cylinder. Kit comes with two hoses, two 90 degree fittings for the wing cylinder, and four fittings for the valve. 

    Due to variances in steering gears, you will have to pick out length of hoses you need for your pressure and return lines. Available in either braided or Kevlar. This kit fits most cars (Eagle, J&J, Maxim, etc.) utilizing an 8" or 10" stroke cylinder.

    Braided Slider Hose 940-1899

    • (2) 90° flare -4 to 1/8" NPT
    • (4) #4 flare to 1/8" NPT
    • (1) 26" braided line w/ 90° end
    • (1) 36" braided line w/ 90° end
  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Stainless Braided Hose Cover, 3/16 to 3/8 Inch O.D.
    Stainless Braided Hose Cover, 3/16 to 3/8 Inch O.D.
    x
                

    Use in conjunction with Tube Seal™ Hose Ends. Duplicates the appearance of far more expensive stainless steel braided hose and fittings. Fits over 3/16" - 3/8" O.D. hose. 

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    Aeroquip Stainless Steel Braided Low Pressure Hose, 11/16 Inch ID, -12 AN
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 750 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Koul Tools 468 Braided Hose Installation Tool, -4 AN, -6 AN, -8 AN
    Koul Tools 468 Braided Hose Installation Tool, -4 AN, -6 AN, -8 AN
    x
                

    Putting hose ends on braided stainless steel hoses can be one of the most frustrating jobs there is...until now!  This handy little tool from Koultools allows you to easily install the hose into the fitting socket without the loss of blood. This KoulTool AN fitting tool is virtually indestructible and can pay for itself the first time you use it.

    Set # 617-9510 with AN 4, AN 6 and AN 8. 

    Instructions (PDF)

  • Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    Aeroquip Stainless Steel Braided Low Pressure Hose, 1.340 Inch ID, AN24
    x
                

    Aeroquip AQP stainless steel braided Racing Hose is one of the finest low pressure fluid transfer hoses available today. The stainless steel braided cover provides excellent abrasion resistance and additional burst strength to the elastomer inner tubing. AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. These hoses provide maximum flexibility and complete reliability, which makes them ideal for both street and race applications.

    • Applications include fuel, lube, coolant, air
    • 50 PSI operating pressure
    • -45° to +300° F temperature rating
    • Made in the U.S.A.
    • Use with Aeroquip full flow hose ends

    Available in several pre-cut lengths for added savings. Cut-to-length also available. When ordering cut-to-length hose, select CUT and in the quantity box leave the number of feet of hose you want. Order number of feet rounded up to next foot. There are no returns or exchanges on cut-to-length hose.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM1110 45 Degree High Pressure -3 AN TFE Hose End
    Aeroquip FBM1110 45 Degree High Pressure -3 AN TFE Hose End
    x
                High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

    Works only with TFE Stainless Braided
    High Pressure Hose.

    Hose End Application Chart (GIF)

  • Aeroquip FBM1121 90 Degree High Pressure -4 AN TFE Hose End
    Aeroquip FBM1121 90 Degree High Pressure -4 AN TFE Hose End
    x
                High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi. 

    Works only with TFE Stainless Braided
    High Pressure Hose.

    Hose End Application Chart (GIF)

  • Koul Tools 1016 Braided Hose Installation Tool, -10 AN, -12 AN, -16 AN
    Koul Tools 1016 Braided Hose Installation Tool, -10 AN, -12 AN, -16 AN
    x
                

    Putting hose ends on braided stainless steel hoses can be one of the most frustrating jobs there is...until now!  This handy little tool from KoulTools allows you to easily install the hose into the fitting socket without the loss of blood. This KoulTool AN fitting tool is virtually indestructible and can pay for itself the first time you use it.

    Set # 617-9511 with AN 10, AN 12 and AN 16.

    Instructions (PDF)

  • Koul Tools 681 Braided Hose Installation Tool, -6 AN, -8 AN, -10 AN
    Koul Tools 681 Braided Hose Installation Tool, -6 AN, -8 AN, -10 AN
    x
                

    Putting hose ends on braided stainless steel hoses can be one of the most frustrating jobs there is...until now!  This handy little tool from Koultools allows you to easily install the hose into the fitting socket without the loss of blood. This KoulTool AN fitting tool is virtually indestructible and can pay for itself the first time you use it.

    Set # 617-9512 with AN 6, AN 8 and AN 10.

    Instructions (PDF)

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/4" - 1-5/8" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
Goto Previous PagePrevious Page
1 2 3