Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"block mounts" Page 1 of 24

  • 3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, Small Block/Big Block V8
    3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, Small Block/Big Block V8
    x
                

    These 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications. Fits most 1958-73 Chevy passenger cars with small block V8. Sold as a pair.

    • Unique rubber formula provides good abrasion resistance and aging stability
    • Ensures maximum life and performance
    • Application-specific Durometer (hardness) based on engine weight & torque
    • Special Chemlock® bonding agent ensures superior rubber-to-metal bond
  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Dynatech   794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    Dynatech 794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    x
                Dynatech® has introduced a convenient and  clutter-free way to mount the OEM air conditioning compressor on your  small block Chevy. Kit includes bracket and two mounting bolts.
            
  • Chevy Weld-In Motor Mounts
    $79.99
    Product Rating: 4.18 Stars
    Chevy Weld-In Motor Mounts
    x
                

    More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! This S/B Chevy and B/B Chevy motor mount has a poly bushing in it giving you a vibration free installation.

    This mount will use replacement bushing 916-34545.

    Welding and fitting required.

  • Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/16” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • 1-5/16" square ports
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Includes (1) left and (1) right side manifold
    • Gaskets and bolts/hardware are not included
  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Chevy Steel Frame Mounts
    $29.99
    Chevy Steel Frame Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.

    Same as factory frame brackets from '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala/Caprice.

  • AFCO 80652 Chevy Engine Mounts, Rear
    AFCO 80652 Chevy Engine Mounts, Rear
    x
                AFCO Rear Chevy Engine Mounts
            
  • Moroso Chevy Steel Motor Mounts
    Moroso Chevy Steel Motor Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These engine brackets are designed to be used with our Steel Frame Mounts 545-62630. 

    • Replaces soft, OEM rubber motor mounts
    • Positive, solid mount eliminates engine rotation and torque loss
    • Prevents linkage binding
    • Fits both Small Block and Big Block Chevy

     

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    x
                

    Side-mount motor mounts are a more rugged mount design than the original front mounts found on your Tri-Five Chevy, plus they allow more room for front drive accessories. Our motor mount kit allows you to side-mount 1958-up S/B Chevy 283-400 c.i. V-8 engines into your 1955, 1956, or 1957 Chevy passenger car.  Will also work on 396-454 big block engines.

    Includes frame brackets, engine brackets, rubber mount cushions, hardware, and instructions.

    1955-1957 Chevy Bolt-In Motor Mount Installation Instructions

  • Small Block Chevy Engine Mount Kit
    $74.99
    $79.99
    Small Block Chevy Engine Mount Kit
    x
                These complete engine conversion mount kits are perfect for that custom hot rod.  They are designed to work with almost any fame that is up to 39" wide.  They feature heavy duty tubing with quality welds sure to hold up to all that SBC horsepower.  Kits include 3-bolt rubber motor mounts and crossmember with ends for either bolt-in or weld-in applications.
    • Crossmember mounts a Chevy engine in almost any frame up to 39" wide
    • Heavy wall 1-3/4" tubing, MIG welded
    • Comes with ends for bolt-in or weld-in applications
    • 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications
    • Unique rubber formula provides good abrasion resistance and aging stability
  • Aluminum Front Motor Mounts for Small Block Chevy
    Aluminum Front Motor Mounts for Small Block Chevy
    x
                Front motor mounts for small block Chevy V8 or 90° V6.
            
  • KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Chevy Solid Motor Mounts
    $14.99
    Chevy Solid Motor Mounts
    x
                

    Steel mounts prevent twist during hard accelerations. Replaces stock upper mounts. Measures 1-11/16" high, 2-1/2" wide.

  • Big Block Ford Current Big Block Motor Mount
    Big Block Ford Current Big Block Motor Mount
    x
                

    Mounts 1969-up 429 and 460 engines in most frames from 28"-38" wide. Just trim to width and either weld it directly to frame or to the 3 hole flanges (included) for bolt-in convenience. Black powder coat finish.

    720-9313 Instructions (PDF)

     

     

    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    x
                

    Mount a Chevy engine in almost any frame up to 39" wide. Heavy wall 1-3/4" tubing, MIG welded. Comes with ends for bolt-in or weld-in applications.

    • Maximum working width: 39"
    • Minimum working width: 21"
    • 5.50" center drop

    Use with 1964-1967 Chevy-style mounts 91018012 (rubber) or 91018015 (polyurethane).

  • KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    KRC KRC16312115 Serpentine Drive Kit, S/B Chevy, Block Mt Pump w/ Tank
    x
                Please view the product's page for more information
            
  • KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    x
                

    KRC's adjustable idler - tensioner is used to keep proper belt tension and prevent belt slippage when using a mechanical fan. This can occur on both single drive belt and pulley systems that have a steering pump mounted of the front of an engine.

    KRC's idler tensioner is essential on dirt cars. Belt slippage can occur on cars that exceed 7,000 RPM and/or use a large or heavy fixed fan blade or a fan blade with a lot of pitch, which potentially causes overheating & pulleys to wear faster. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine. 

    Fan belts and pulleys work to slow down the fan. The belt slips because it is stretching to slow the fan. The belt heats up as the the the stretching increases. The only way to properly tension the belt is with an adjustable idler/tensioner. This keeps the engine running cooler because the belt is tighter. This will allow faster acceleration out of turns and harder braking on corners.

    • Designed for GM 602 & 604 Crate Engines
    • Use with KRC serpentine drive systems
    • Assembly contains:
      • Idler - Tensioner
      • Hardware and Instructions

     

     

  • Small Block Ford 2-Bolt Rubber Motor Mounts
    Small Block Ford 2-Bolt Rubber Motor Mounts
    x
                

    These 2-bolt S/B Ford rubber motor mounts are manufactured to meet or exceed OEM specifications. Fits most 1965-78 Ford fullsize passenger cars with Small Block 289, 302, and 351W V8s. Sold as a pair (left & right side). 

    • Unique rubber formula provides good abrasion resistance and aging stability
    • Ensures maximum life and performance
    • Application-specific Durometer (hardness) based on engine weight & torque
    • Special Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Early Hemi Universal Side Engine Mounts
    Early Hemi Universal Side Engine Mounts
    x
                

    If you want to shoehorn an Early Hemi in your Hot Rod, we've got you covered. These mounts bolt to the side of the block and allow you to use our bolt-thru cushion kit. They have two sets of cushion holes to allow for different frame widths. The frame mounting bracket is up to you to design and build.

    For the following side tab configuration on the block:

    • Drivers Side - 2 holes to the front & 1 hole to the rear
    • Passenger Side  - 2 holes to the rear & 1 hole to the front
    If the side tabs on both side of the block have 2 holes to the front and 1 hole to the rear, this bracket WILL NOT work.

     

  • Block Mount Power Steering Pump Bracket for Short Water Pump
    Block Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • Ford FE Series Big Block Motor Mount
    Ford FE Series Big Block Motor Mount
    x
                Mounts a 352, 360, 390, 406, 427 or 428 Ford FE V8 engine into frames up to 38" wide. Uses heavy 1-1/2" O.D. mild steel tubing. Black powder coat finish. 

     


    NOTE: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Moose Blocks 2016 Engine Heater Hose Bracket     AN 8 Barnes Mount
    Moose Blocks 2016 Engine Heater Hose Bracket AN 8 Barnes Mount
    x
                These hot set up blocks from Moose Blocks feature a mounting bracket and AN8 Port thread pitch.
    • Hole pattern is identical to the Barnes' oil filter bracket, mounts all together with use of a longer bolt
    • -8 AN ports
  • Small Block Chevy Lower Alternator Bracket, Stainless
    Small Block Chevy Lower Alternator Bracket, Stainless
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket and spacers
    • Does NOT Include bolts
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1962-1994 Small Block Ford 289-302 Engine Mount
    1962-1994 Small Block Ford 289-302 Engine Mount
    x
                

    Specially designed brackets to mount your 1962-1994 S/B Ford or Mercury 260-289-302 V8 into almost any chassis. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Guide (GIF)

    Small Block Ford Motor Mount Installation Instructions (PDF)

  • KRC 28020115 Alum SBC Pump Kit, Serpentine, Block Mount, Bolt-On Tank
    KRC 28020115 Alum SBC Pump Kit, Serpentine, Block Mount, Bolt-On Tank
    x
                

    Starting with all-new Pro Series aluminum pumps designed specifically for racing, these small block Chevy kits come complete with a block mount bracket, spacers, an aluminum reservoir and complete instructions. The pumps have a 6 AN outlet and 6 AN return line with a 4.2" serpentine pulley.

    466-28020B Instructions (PDF)

  • 1935-40 Ford Bolt In Motor Mount Kit for Small Block Chevy
    1935-40 Ford Bolt In Motor Mount Kit for Small Block Chevy
    x
                
    '35-'40 Bolt In Motor Mount kit

    Note:  Motor mount kit 910-53540 works only with crossmember 910-43540.

    Note:  This crossmember must be used with the non-strut rod type lower control arms.  As designed, it will not work with stock type or the O/E type lower control arms that make use of a strut rod.

  • C&S Low Mount Small Block Chevy Pump Bracket Kit
    C&S Low Mount Small Block Chevy Pump Bracket Kit
    x
                
            
  • C&S Small Block Chevy High Mount Pump Bracket Kit
    C&S Small Block Chevy High Mount Pump Bracket Kit
    x
                
            
  • KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side cylinder head mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

Goto Previous PagePrevious Page
1 2 3 4 5 ... 24