Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"bird cage bearing" Page 1 of 2

  • Bird Cage Single Row Bearing, 0.79 x 4.33, 3 Inch Spline Hub
    Bird Cage Single Row Bearing, 0.79 x 4.33, 3 Inch Spline Hub
    x
                Our Sprint & Midget birdcage bearings are top quality for long life. These are single row bearings.
            
  • Bird Cage Single Row Bearing, 0.79 x 4.33
    Bird Cage Single Row Bearing, 0.79 x 4.33
    x
                Our Sprint & Midget birdcage bearings are top quality for long life. These are single row bearings.
            
  • Swindell Series Birdcage Bearing Grease Holes Only 1.10 x 3.94 Std. Race
    Swindell Series Birdcage Bearing Grease Holes Only 1.10 x 3.94 Std. Race
    x
                

    This Swindell Series bearing is specifically suited for the new Swindell Series birdcages (940-4926 PR/940-4928 RH/940-4929 LH).  These bearings utilize grease holes in conjunction with grease grooves machined into the birdcage and therefore feature no grease groove, creating a stronger bearing.

    • Inside Diameter: 2.75"
    • Outside Diameter: 3.95"
    • Overall Width: 1.11"

     

  • Birdcage Double Bearing - 1.10 x 3.94 - STD Race
    Birdcage Double Bearing - 1.10 x 3.94 - STD Race
    x
                Upgrade your current birdcages with this double bearing 1.10" x 3.94" birdcage with included grease groove. They are angular contact STD race. 
            
  • Eagle Motorsports Sprint Car Birdcage Flag
    Eagle Motorsports Sprint Car Birdcage Flag
    x
                

    These are Eagle Motorsports factory-built birdcage flags for 94037017 (w/bearings) and 94037018 (w/o bearings).

    • Wide design for use with multiple arm offsets
    • Aluminum construction

     

     

  • Replacement Bearing for Ultimate Steel Birdcage
    Replacement Bearing for Ultimate Steel Birdcage
    x
                

    Replacement bearing for BSB Ultimate Steel Birdcage. Bearing I.D. is 3.008" and O.D. is 3.632".

  • Swindell Series Sprint Car Birdcage Bearing Installation Tool
    Swindell Series Sprint Car Birdcage Bearing Installation Tool
    x
                
    Swindell Series now offers an easy-to-use, double sided tool to safely drive in or remove birdcage bearings straight every time at the track or in the parking lot. This birdcage bearing tool will not bend the cages or damage the bearing and will work for any brand birdcage/bearing combination. These are machined in the USA. 
    • Double sided tool to safely drive in or remove birdcage bearings straight and true every time
    • Will not bend the cages, or damage the bearing
    • Works on any brand birdcage/bearing combination
    • Made in the USA
    Sammy says, “We developed this tool to help teams easily install bearings. It’s an affordable piece and should be included in every tool box. It’s a quick and easy to way to change out broken or faulty bearings quickly and efficiently.”
  • Swindell Series Deluxe Billet Aluminum Sprint Car Birdcage Set
    Swindell Series Deluxe Billet Aluminum Sprint Car Birdcage Set
    x
                Please view the product's page for more information
            
  • Sander Aluminum Angular Bearing Bird Cage - 31 Spline
    Sander Aluminum Angular Bearing Bird Cage - 31 Spline
    x
                Sander billet aluminum birdcage. For 31 spline axles. These are the same heavy duty bearings used in sprint car birdcages.
            
  • Eagle Motorsports Sprint Car Birdcage Set With Bearings
    Eagle Motorsports Sprint Car Birdcage Set With Bearings
    x
                
    Eagle Motorsports factory-built birdcage set.
     
    • Bearings included and installed
    • Hardware included
    • Brilliant black two-tone finish
    • Close ratio geometry with wide flag for use with multiple arm offsets
    • Canted upper radius rod spud for zero bind
    • Angular contact bearing and integrated low profile grease zerks
  • BSB Manufacturing 7320 Ultimate Steel Birdcage with Bearing
    BSB Manufacturing 7320 Ultimate Steel Birdcage with Bearing
    x
                

    Lightest bearing birdcage on the market. Dual bearing design to spread load over more area. Stronger design than others because both bearings are receiving force from the 4-link plate when the plate is under load. 

    Can be used as a 4-link cage or a swing arm cage or even as a 2-link if so desired. Comes with standard clevis shock mount. Fits either the left or right side.

  • Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    Wehrs Machine WM200LRB Lightweight Left Rear Steel Bearing Birdcage
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability.

  • Wehrs Machine WM200RRB Lightweight Right Rear Steel Bearing Birdcage
    Wehrs Machine WM200RRB Lightweight Right Rear Steel Bearing Birdcage
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability.

  • Swindell Series Deluxe RH Sprint Car Birdcage
    Swindell Series Deluxe RH Sprint Car Birdcage
    x
                

    Sammy Swindell designed this birdcage out of 6061-T651 aircraft billet aluminum. It features a grease groove machined into the cage, rather than on the bearing. This innovative design increases durability. Grooved bearings can snap in half on certain impacts; this cage solves that problem. This cage has tight pick-up points and features three locations to square from to make timing easy and accurate. This cage is machined in the USA and finished with beautiful two-tone black anodizing. It is the highest quality cage on the market and the best value!

    This is the RH cage only and does not include the bearing (940-5914), flag (940-4931), spud (940-4932), spiral locks (912-55601), grease zerks (910-10595) or hardware. 

     

  • Swindell Series Deluxe LH Sprint Car Birdcage
    Swindell Series Deluxe LH Sprint Car Birdcage
    x
                

    Sammy Swindell designed this birdcage out of 6061-T651 aircraft billet aluminum. It features a grease groove machined into the cage, rather than on the bearing. This innovative design increases durability. Grooved bearings can snap in half on certain impacts; this cage solves that problem. This cage has tight pick-up points and features three locations to square from to make timing easy and accurate. This cage is machined in the USA and finished with beautiful two-tone black anodizing. It is the highest quality cage on the market and the best value!

    This is the LH cage only and does not include the bearing (940-5914), flag (940-4931), spud (940-4932), spiral locks (912-55601), grease zerks (910-10595) or hardware.  

  • Eagle Motorsports Sprint Car Birdcage Set Without Bearings
    Eagle Motorsports Sprint Car Birdcage Set Without Bearings
    x
                

    Eagle Motorsports factory-built birdcage set. 

     

    • Everything included except for bearings
    • Brilliant black two-tone finish
    • Close ratio geometry with wide flag for use with multiple arm offsets
    • Canted upper radius rod spud for zero bind
    • Angular contact bearing and integrated low profile grease zerks 

     

  • Non-Wing RR Birdcage (No Bearing)
    Non-Wing RR Birdcage (No Bearing)
    x
                Utilized by top USAC teams these billet cages offer close ration pick-up points to optimize rear arm angle. Hardware and accessories included - bearings needed.
            
  • Non-Wing LR Birdcage (No Bearing)
    Non-Wing LR Birdcage (No Bearing)
    x
                Utilized by top USAC teams these billet cages offer close ration pick-up points to optimize rear arm angle. Hardware and accessories included - bearings needed.
            
  • Swing-Arm Style Birdcage
    $159.99
    Swing-Arm Style Birdcage
    x
                This swing arm style steel birdcage features a completely sealed bearing to eliminate suspension bind. IMCA approved.
            
  • Sander Engineering 4070 Billet Aluminum Birdcage, 31 Spline
    Sander Engineering 4070 Billet Aluminum Birdcage, 31 Spline
    x
                Sander 1-piece billet aluminum birdcage. For 31 spline axle. With built in level.
            
  • Wehrs Machine WM200-8 Shock Mount Swivel
    Wehrs Machine WM200-8 Shock Mount Swivel
    x
                

    Steel roller bearing birdcages have a split plate design to allow for repairs without removing the entire hub. Standard model comes with angled shock drop with a no bind swivel. Bottom hole is 4-1/2” down from centerline of housing and top is 4-1/2” up but features multiple holes to change the rate at which the birdcage indexes. Also allows for various shock and spring mounting locations for ultimate turn ability. The swivel actually includes a 3-1/2" long by ½"  grade 8 bolt instead of a one piece design with a stud on the back side. The bolt leaves approx. 3" left off the back side of the swivel.

    • Allows various shock and spring mounting locations
    • Angled shock drop with no bind swivel
    • Bottom hole is 4-1/2" down of centerline of housing
    • Top hole is 4-1/2" up from centerline of housing
    • Features multiple holes to change rate at which birdcage indexes
    • 3-1/2" x 1/2" Grade 8 bolt
    • Approx. 3" left off back side of swivel 

     

  • AFCO IMCA Approved Steel Bearing Birdcage
    $269.99
    $304.99
    AFCO IMCA Approved Steel Bearing Birdcage
    x
                Steel construction featuring a completely sealed bearing eliminating suspension bind. IMCA approved.  
            
  • MPD Racing 021900 Billet Aluminum Midget Birdcage Set, 31-Spline
    MPD Racing 021900 Billet Aluminum Midget Birdcage Set, 31-Spline
    x
                

    MPD billet aluminum birdcage made for Midgets.

    • For 31-spline axle
    • Lightweight
    • Durable
    • Polished finish
  • Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    x
                These centering tools allow you to install a rear  end in a  chassis without being hooked up to a motor plate.  This is  helpful when  setting up an extra chassis before heading to the track.  This tool is specifically made for all types of micro chassis! 
    • Round hole is for the rear axle
    • 1 3/4" notch is for the front axle
    • Small hole is for the round rods
    Rear squaring:
    1. Set left and right torsion arm lengths with fixture
    2. Hook torsion arms to torsion bars without stops
    3. Hook torsion arms to bearing carriers
    4. Adjust radius rods to proper lengths and hook to bearing carriers
    5. Now unhook torsion arms
    6. With a protractor rotate bearing carriers 57 degrees
    7. Re-attach torsion arms (arms may need to be lengthened or shortened)
  • Mobil Polyrex Electric Motor Grease for Swindell Bearings, 14 oz, Blue
    Mobil Polyrex Electric Motor Grease for Swindell Bearings, 14 oz, Blue
    x
                This is the recommended grease for the Swindell Deluxe Birdcage Grease Hole Bearing (940-5914). 
    • Swindell Deluxe Birdcage Grease Hole Bearing (940-5914)
    • Electric Motor Grease, Polyrex EM
    • Container Size: 14 oz Cartridge
    • Size/Net Weight: 14 oz
    • Temp Range: -29C to 177C
    • Color: Blue
    • NLGI Grade 2
    • Polyurea Base
    • Film Type: Semi-Solid to Solid Grease
    • Standards: ASTM D 3336
    Note: You can also use Red Line CV-2 grease (607-10002).
  • Steel Split Retainer Ring For 3 Inch Axle Tube
    Steel Split Retainer Ring For 3 Inch Axle Tube
    x
                

    IMCA approved steel split retainer ring for 3" diameter axle tube with birdcage. Includes a bolt and lock nut.

    For IMCA Approved Swing-Arm style birdcage 910-45525. 

  • Winters Performance SC2575 Forged Birdcages
    Winters Performance SC2575 Forged Birdcages
    x
                These Winters forged bird cages include fully greasable 28mm angle contact bearing. Integrated timing level. 
            
  • Winters Performance 6156 Steel Birdcage Spacer, No Splines, 3/16 Inch
    Winters Performance 6156 Steel Birdcage Spacer, No Splines, 3/16 Inch
    x
                Steel axle spacer.
            
  • King Super Complete RH Birdcage Set
    King Super Complete RH Birdcage Set
    x
                Unique tight ratio 1-piece design includes brake brackets on each side and machined flat surfaces for easy leveling.  Includes 28mm angular contact split race bearings and all hardware.
            
  • Eagle Motorsports LH Sprint Car Birdcage
    Eagle Motorsports LH Sprint Car Birdcage
    x
                

    Eagle Motorsports factory-built component.

     

    • Brilliant black two-tone finish
    • Close ratio gemoetry with wide flag for use with multiple arm offsets
    • Canted upper radius rod spud for zero bind
    • Angular contact bearing and integrated low profile grease zerks 

     

  • Sander Engineering 4089 Birdcage, RH
    Sander Engineering 4089 Birdcage, RH
    x
                

    Sander Engineering billet aluminum birdcages feature double row angular contact bearings and have a 3.25" brake mount so you can run a RR or LR brake.

    Sold individually.

  • Sander Engineering 4089 Birdcage, LH
    Sander Engineering 4089 Birdcage, LH
    x
                

    Sander Engineering billet aluminum birdcages feature double row angular contact bearings and have a 3.25" brake mount so you can run a RR or LR brake.

    Sold individually.

Goto Previous PagePrevious Page
1 2