Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"billet small block chevy" Page 1 of 4

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Cloyes Gear 9-3100A Hex-A-Just Timing Chain Set, Small Block Chevy
    Cloyes Gear 9-3100A Hex-A-Just Timing Chain Set, Small Block Chevy
    x
                

    Cloyes Hex-A-Just True Roller Set is infinitely adjustable to plus or minus six degrees. No machining required, no fumbling with offset bushings. Simply dial in your cam timing with the turn of a wrench, then tighten the cam bolts to lock the cam position in place. Whether your destination is the street or the track, Hex-A-Just will get you there fast!

    • Billet steel, induction hardened sprockets
    • Cloyes' patented Hex-A-Just allows for +/- six degrees adjustment
    • Premium Cloyes True Roller gear chain with .250” diameter rollers
    • 3-keyway billet crank sprocket
    • All sets “hand matched” at factory to ensure accurate center distance
    • Includes needle bearing thrust bearing
  • Billet Specialties 40120 Billet 1955-79 Small Block Chevy Dipstick
    Billet Specialties 40120 Billet 1955-79 Small Block Chevy Dipstick
    x
                

    Fits 1955-1979 Small Block Chevy blocks and replaces factory driver-side dip stick tube for a clean look (dipstick seats directly into the block). Polished billet aluminum construction with O-ring for a positive seal.

  • 6 3/4 Inch Chevy Harmonic Balancer Covers
    6 3/4 Inch Chevy Harmonic Balancer Covers
    x
                6.75" Harmonic balancer covers for Small Block Chevys. Available blue, black, red, chrome or billet. 
            
  • Crane Cams Chevy Billet Race Distributors
    Crane Cams Chevy Billet Race Distributors
    x
                

    Engineered for drag racing and oval track applications, this analog design distributor has locked out timing, essential for competition engines. The CNC-machined billet aluminum housing, stainless steel shaft with bearings top and bottom has proven to be 100% dependable in racing environments. It has an optical trigger and timing is accurate to within ± 0.5° (1/2 degree). Both large and small cap models are offered and the caps have solid brass terminals for optimum conductivity.

    Fitsor 1955-1996 Small Block and Big Block Chevy V8. Choose small or large cap version.

    • Drag Race and Circle Track applications
    • Analog design
    • Locked-out timing
    • Billet lower housing
    • Highly accurate optical trigger
    • Bearings support shaft top and bottom
    • Melanzied steel gear compatible with billet and cast cams
  • Billet Specialties Streamline Chevy Valve Covers
    Billet Specialties Streamline Chevy Valve Covers
    x
                Billet Specialties Streamline valve covers offer a fresh new look for hot rod & custom car valve covers. A single precision machined raised billet rib sits upon on a die cast aluminum valve cover to complement any exterior trim cues. All valve covers include stainless hardware and baffles. Works with 1-1/4" breathers such as our 910-23120. 
    • Removable accent trim spear
    • Includes metal baffles
    • Includes grommets
    • 1960-86 S/B Chevy
    • Works with 1-1/4” breathers
    • Choose raw finish or satin black powdercoated
  • Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    Small Block Chevy Billet Aluminum Water Pump Pulley, 6-7/8 Inch O.D.
    x
                

    Speedway Billet Aluminum double groove pulleys for small block Chevy feature a 30% reduction. Reduction pulleys have a smaller diameter which slows the speed of your fan, water pump, and alternator to reduce drag for more top-end horsepower. Plus, high RPM water pump operation is improved due to reduced fluid cavitation.

    • High strength billet aluminum construction
    • Superior belt retention with extra-deep grooves
    • 30% reduction slows accessories down for less drag
    • Adds top-end horsepower
    • Reduces water pump impeller speed below cavitation threshold
    • Improved high-RPM cooling capabilities

    Fits short style pumps ('55-'68) or long style pumps ('69-'86). Fits a 5/8" shaft.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • MSD 85551 Chevy Billet Distributor
    MSD 85551 Chevy Billet Distributor
    x
                

    You can't go wrong with the best selling MSD Billet Distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

    Fits Small Block or Big Block Chevy V8.

    Instruction Sheet for 547-5551 (pdf) 

  • Edelbrock 17000 Victor Billet Small Block Chevy Mechanical Fuel Pump
    Edelbrock 17000 Victor Billet Small Block Chevy Mechanical Fuel Pump
    x
                

    Edelbrock Victor Series billet aluminum mechanical fuel pumps are for high performance racing applications. The 5/8"-18 inlet and outlet come with -8AN fittings installed to provide increased flow over street fuel pumps, and the base can be rotated to allow for various fuel line configurations. These billet aluminum pumps produce 8.5-9 psi and require a pressure regulator.

    • For use with gasoline or alcohol
    • Flows up to 170 GPH
    • Superior materials: 100% machined from billet 6061-T6 aluminum
    • Quality construction CNC-machined to exact tolerances
    • Tough design with stronger mount for increased durability
    • Clear anodized finish with the Edelbrock logo laser engraved on the pump body
    • Clockable lower housing can be rotated for best inlet/outlet alignment
    • -8 AN fittings installed
    • Includes mount gasket and bolts

    325-17000 Instructions (PDF)

  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • Small Block Chevy Inboard A/C Brackets
    Small Block Chevy Inboard A/C Brackets
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our polished billet aluminum brackets to make this a simple installation. 

    Inboard (high) mount brackets for early cars.



    Note: S/B Chevy, short style water pump only.
  • MSD 85561 Chevy Billet Distributor with Slip Collar
    MSD 85561 Chevy Billet Distributor with Slip Collar
    x
                Please view the product's page for more information
            
  • Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    x
                

    This billet aluminum timing cover for small block Chevys is both strong and lightweight. Cover fits SBC engines 1955-84 model years. Gaerte designed this cover for use in dirt late model racing applications but can be used in other forms of racing. 

    Add an adjustable timing pointer (sold separately) and you're good to go.

  • MSD 8362 Street Fire Chevy V8 GM HEI Distributor
    MSD 8362 Street Fire Chevy V8 GM HEI Distributor
    x
                

    Street Fire is a new division of MSD Ignition aimed at delivering high quality and great value.

    So don't let the low price of this Street Fire HEI Distributor fool you - it still has rock-solid features like coated centrifugal advance weights, welded weight pins, brass cap terminals, adjustable vacuum advance and the same stout drive gear used on MSD's premier Pro-Billet distributors.

    By using all-new heavy duty components throughout, MSD can give the Street Fire a full one-year warranty.

    547-8362 Instructions (PDF)

  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing
    MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing
    x
                Please view the product's page for more information
            
  • MSD 8365 Pro-Billet Chevy HEI Distributor
    $369.99
    $388.99
    Product Rating: 4.00 Stars
    MSD 8365 Pro-Billet Chevy HEI Distributor
    x
                Please view the product's page for more information
            
  • Cloyes Gear 9-3146A Hex-A-Just Timing Chain Set, S/B Chevy, Raised Cam
    Cloyes Gear 9-3146A Hex-A-Just Timing Chain Set, S/B Chevy, Raised Cam
    x
                

    Cloyes Hex-A-Just True Roller Set is infinitely adjustable to plus or minus six degrees. No machining required, no fumbling with offset bushings. Simply dial in your cam timing with the turn of a wrench, then tighten the cam bolts to lock the cam position in place. Whether your destination is the street or the track, Hex-A-Just will get you there fast!

    • Includes needle bearing thrust bearing
    • Billet Steel, Induction Hardened Sprockets
    • Cloyes' Patented Hex-A-Just allows for +/- six degrees adjustment
    • Premium Cloyes True Roller Chain with .250” diameter rollers
    • 3 Keyway Billet Crank Sprocket
    • All sets “Hand Matched” at factory to ensure accurate center distance
  • MSD 8361 Billet Chevy Distributor with Vacuum Advance
    MSD 8361 Billet Chevy Distributor with Vacuum Advance
    x
                

    The Street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ-coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any rpm. The Street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition Control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.

  • Comp Cams 8100 Small Block Chevy Ultimate Adjustable Billet Timing Set
    Comp Cams 8100 Small Block Chevy Ultimate Adjustable Billet Timing Set
    x
                These adjustable billet timing gear sets are designed for use on Chevy V6 90° 1978-86 and 265-400 1955-91 small block Chevy applications. 
    • High-strength billet gears and seamless roller timing chain deliver years of reliable service
    • Features 2-degree incremental adjustability, 6-degree maximum advance/retard
    • Unique design yields precise camshaft timing and durability
    • Includes Torrington roller thrust bearing for reduced friction and custom adjusting tool
    • Ideal for all street performance and race applications
  • Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    x
                

    BluMax Stud Girdles are designed to eliminate rocker stud flexing and provide more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These lightweight, spring-loaded, 6061 T-6 aluminum stud girdles include 3/8" polylocks.

    For S/B Chevy V8. 

    • Polylocks included
    • Anodized for a superior finish
    • More consistent high-RPM performance
    • Easy and quick removal and replacement
    • Made from the finest quality billet aluminum
    • Pre-machined to allow for vacuum pump airflow

     

  • KRC Small Block Chevy Aluminum Lower Pulley Spacer
    KRC Small Block Chevy Aluminum Lower Pulley Spacer
    x
                Billet aluminum lower crankshaft pulley spacer for Small Block Chevy engines. Choose thickness.
            
  • MSD 8360 Chevy V8 with Internal Module Distributor
    MSD 8360 Chevy V8 with Internal Module Distributor
    x
                Please view the product's page for more information
            
  • Billet Aluminum Black Small Block Chevy Motor Mounts
    Billet Aluminum Black Small Block Chevy Motor Mounts
    x
                

    Our universal billet engine mounts are machined from 2025 aluminum and include bushing inserts. They feature a painted black finish and include universal frame adapters.

    • Flange Face to Bushing Eye:  3.5"
    • Fits Small Block Chevy applications
    • Painted black billet aluminum

    Note: These mounts are generally too wide for Model T & Model A chassis.

     

  • Cloyes Gear 9-3100 Small Block Chevy True Roller Timing Chain
    Cloyes Gear 9-3100 Small Block Chevy True Roller Timing Chain
    x
                

    Cloyes True Rollers are the original, all-out race proven double roller timing chain sets. Cam sprockets are balanced and made from heat treated 30,000 PSI tensile cast iron, or SAE D7003 ductile iron. Sets have multi-keyway crank sprockets.

    • Ductile Iron or Induction Hardened Cast Iron Cam Sprocket
    • Cloyes Premium True Roller Chain with .250 Diameter Rollers
    • SAE 1144 Billet Steel, Induction Hardened Crank Sprocket with 3 keyways, +/- 4 Degrees
    • All sets are “Hand Matched” to ensure true center distance

    Fits 1955-1984 265-400 Chevy small block V8.

  • Chevy V8 Mag-Look Electronic Distributors
    Chevy V8 Mag-Look Electronic Distributors
    x
                

    If you don't want a magneto, but love the looks, get one of these electronic distributors! These fully self-contained distributors feature full centrifugal advance for ease of starting along with a 3-wire hook-up that anyone can handle. All modern electronics give you a "State-of-the-Art" ignition system.

    • 3-1/2" in diameter
    • 8-3/4" tall (above mount flange)
    • Billet 6061-T6 housing 
    • High output 2.5 amp internal ignition coil
    • Electronic pickup
    • Customizeable advance mechanism
    • Ballast Resistor included - must be utilized per included instructions
    • 2-Red wires for Ballat Resistor W/ 3rd brown wire for Tach provided

    Fits Small Block and Big Block Chevy V8.

  • Billet-Style Small Block Chevy Aluminum Front Cover
    Billet-Style Small Block Chevy Aluminum Front Cover
    x
                Polished alum. construction gives the look of a multi-piece timing chain cover. Crank seal and cover gasket are not included. Fits S/B Chevy.
            
  • Speedway Lower Crank Pulley Spacers for Small Block Chevy
    Speedway Lower Crank Pulley Spacers for Small Block Chevy
    x
                Billet aluminum lower crankshaft pulley spacers for  Small Block Chevy engines. Available in 3 widths, .200", .250", and  .375" to provide precise pulley alignment for your application.
    • Billet aluminum
    • Natural finish
    • 3-bolt configuration
    • 4" O.D.
    • 0.88" I.D.
    • .200", .250", or .375" thick
    • Sold each
  • LED Timing Pointer, Small Block Chevy for 7 1/4 Inch Balancer
    LED Timing Pointer, Small Block Chevy for 7 1/4 Inch Balancer
    x
                

    SB Chevy with 7-1/4" Balancer

    Someone should have thought of this years ago!

    This billet aluminum, Small Block Chevy timing tab has a built-in, self-powered LED timing light that eliminates the need for a separate timing light or car battery hook-up. Permanently mounted so it's always there when you need it. This light makes it easy for one person to set timing.

  • MSD 8356 Small Block Chevy Dual Pickup Distributor
    MSD 8356 Small Block Chevy Dual Pickup Distributor
    x
                Please view the product's page for more information
            
  • Lokar ED-5009 Flexible Engine Dipstick, Ramjet/SBC GM Vortec
    Lokar ED-5009 Flexible Engine Dipstick, Ramjet/SBC GM Vortec
    x
                

    This Flexible Engine Dipstick is designed with a billet aluminum handle to coordinate with Lokar's Flexible Transmission Dipstick. Slim design allows mounting inside headers. Designed for use with factory, Sanderson cast manifolds or block hugger headers.  E-Z read flexible inner dipstick measuring cable for accurate measure of engine oil.

  • Lokar XED-5002 Up to 1979 SBC Midnight Series Flexible Engine Dipstick
    Lokar XED-5002 Up to 1979 SBC Midnight Series Flexible Engine Dipstick
    x
                Flexible Engine Dipstick designed with billet aluminum handle to   coordinate with Lokar's Flexible Transmission Dipstick.  Slim design   allows mounting inside headers.  Designed for use with factory,   Sanderson cast manifolds or block hugger headers.   E-Z read flexible  inner dipstick measuring cable for accurate measure of engine oil.
            
  • Comp Cams 7100 Small Block Chevy Keyway Adj. Billet Timing Set w/Bearing
    Comp Cams 7100 Small Block Chevy Keyway Adj. Billet Timing Set w/Bearing
    x
                These adjustable billet timing gear sets are designed for use on 265-400 1955-1991 small block Chevy applications. 
    • Induction hardened and precision machined steel billet gears for bullet proof durability
    • Feature 9 keyway crank sprocket for 2-degree incremental adjustability, 8-degree maximum advance/retard
    • Pre-stretched, heat-treated double roller timing chain with heavy-duty large pin design
    • Includes Torrington roller thrust bearing for reduced friction
    • Ideal for all street performance and race applications
  • Small Block Chevy Inboard Alternator Bracket
    Small Block Chevy Inboard Alternator Bracket
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.
  • LED Timing Pointer, Small Block Chevy for 7 Inch Balancer
    LED Timing Pointer, Small Block Chevy for 7 Inch Balancer
    x
                

    Someone should have thought of this years ago!

    This billet aluminum, Small Block Chevy timing tab has a built-in, self-powered LED timing light that eliminates the need for a separate timing light or car battery hook-up. Permanently mounted so it's always there when you need it. This light makes it easy for one person to set timing.

  • Lokar ED-5000ESB Engine Dipstick, Small Block Chevy 1979 & Earlier
    Lokar ED-5000ESB Engine Dipstick, Small Block Chevy 1979 & Earlier
    x
                Features a billet aluminum handle with an O-ring seal. Seats directly into the engine block of pre-1980 S/B Chevy, does not use a tube. Shorty design is perfect for close quarters. Handle length is 2-1/2". 
            
Goto Previous PagePrevious Page
1 2 3 4