Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"big lightweight steel bellhousing" Page 1 of 1

New (0)

Garage Sale (0)

  • Quick Time RM-8011 Big Block Ford Steel Bellhousing, T10 & Toploader
    Quick Time RM-8011 Big Block Ford Steel Bellhousing, T10 & Toploader
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a Borg-Warner T10 or Toploader 4-speed manual transmission behind your favorite V8 engine. We're now offering them for big block Ford 400, 429 and 460.

    The compact design allows the bellhousings to fit in tight quarters and most will accommodate up[ to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hydraulic release bearings.  

    Drilled for most major throwout bearings. Includes lower flywheel cover.

    •     Height = 6.300
    •      Trans. Bore Ø = Universal 4.85/4.910/4.685
    •      Engine = Ford 351m, 400, 429, 460
    •      Trans. = Universal Toploader/Borgwarner T-10/Short Shaft Ford TKO 500-600
    •      Clutch Ø = 12"
    •      Flywheel = 176 tooth
    •      Weight = 22#
    •      Universal fork brackets for diaphragm or cable linkage
    •      Has passed all SFI testing
    •      Pivot ball, fork brackets, grade 8 bolts, and full engine plate included
  • Quick Time RM-6010 Chevy Steel Trans Bellhousing, Hydraulic Linkage
    Quick Time RM-6010 Chevy Steel Trans Bellhousing, Hydraulic Linkage
    x
                

    These strong, lightweight steel bellhousings from Quick Time are just the ticket for installing a manual transmission behind your Small Block or Big Block Chevy V-8. The compact design allows the bellhousings to fit in tight quarters while still accommodating a 10-1/2" clutch. Must be used with a hyraulic throwout clutch release bearing and a mini starter.  

    • Lightest steel bellhousing available anywhere
    • Cone is spun (not rolled or stamped) for extreme dimensional stability
    • High grade steel — work hardens to over 80,000 PSI strength
    • Over 2 times the strength of any other steel bellhousing
    • Engine = Small Block Chevy, Big Block Chevy, LT1
    • Trans. = Muncie, Richmond, Saginaw, Falcon, Bert, Jerico 4-5 Speed, Brinn, Chevy TKO 500/600, BW-T10
    • Max Clutch Diameter = 10.5"
    • Flywheel = 153 tooth
    • Drilled for most major throwout bearings
    • Passed SFI testing
    • Engine plate and grade 8 bolts included
    • Must use mini starter

    Fits common GM transmisson bolt pattern. Includes lower flywheel cover and grade 8 bolts. Only 18 lbs.

  • Quick Time RM-6020 Chevy Steel Transmission Bellhousing - Mech Linkage
    Quick Time RM-6020 Chevy Steel Transmission Bellhousing - Mech Linkage
    x
                

    These strong, lightweight steel bellhousings from Quick Time are just the ticket for installing a manual transmission behind your Small Block or Big Block Chevy V-8. The compact design allows the bellhousings to fit in tight quarters while still accommodating a 10-1/2" clutch. Must be used with a mini starter.  

    Set up to use an original style clutch fork and release bearings, but can also be used with hydraulic release bearings. Fits common G transmission bolt pattern. Includes lower flywheel cover and grade 8 bolts. Only 18 lbs.

    • Lightest steel bellhousing available anywhere
    • Cone is spun (not rolled or stamped) for extreme dimensional stability
    • High grade steel — work hardens to over 80,000 PSI strength
    • Over 2 times the strength of any other steel bellhousing
    • Flywheel = 153 tooth

     

  • Quarter Master 110432 Chevy/Ford Steel Bellhousing
    Quarter Master 110432 Chevy/Ford Steel Bellhousing
    x
                The lightest steel bellhousing on the market! 

    This lightweight steel bellhousing can be used with either stock type throw-out arms or hydraulic release bearings. Fits either Chevy or 302/351W Ford with 5-1/2" or 7-1/2" clutches.

    910-110430 Instructions (PDF)

  • Quick Time RM-8010 Ford 400-429-460 Steel Bellhousing - T5 & TKO
    Quick Time RM-8010 Ford 400-429-460 Steel Bellhousing - T5 & TKO
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a Borg-Warner T5 or Tremec TKO manual transmission behind your favorite V8 engine. We're now offering them for big block Ford 400, 429 and 460.

    The compact design allows the bellhousings to fit in tight quarters and most will accommodate up to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hyraulic release bearings.  

    Drilled for most major throwout bearings. Includes lower flywheel cover.

    •      Height = 7.050
    •      Trans. Bore Ø = Universal 4.910/4.685
    •      Engine = Ford 351m, 400, 429, 460
    •      Trans. = Universal Ford TKO 500-600/T5 Mustang/TR3550
    •      Clutch Ø = 12"
    •      Flywheel = 176 tooth
    •      Weight = 22#
    •      Universal fork brackets for diaphragm or cable linkage
    •      Has passed all SFI testing
    •      Pivot ball, fork brackets, grade 8 bolts, and full engine plate included
  • Quick Time RM-6073 Mopar Big Block 383-413-440 Bellhousing
    Quick Time RM-6073 Mopar Big Block 383-413-440 Bellhousing
    x
                

    These strong, lightweight steel bellhousings are just the ticket for installing a Mopar 3 or 4 speed manual transmission behind your favorite V8 engine. We're now offering them for big block 383-440 Mopars.

    The compact design allows the bellhousings to fit in tight quarters and most will accommodate up to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hydraulic release bearings.

    • Height = 7.400"
    • Trans. Bore Ø = Universal 4.807/5.125
    • Engine = Mopar 383/400/426/440
    • Trans. = 3-4 speed Mopar
    • Clutch Ø = 10.5"
    • Flywheel = 130 tooth
    • Weight = 22#
    • Fork bracket, full engine plate, and grade 8 bolts included

     

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.