Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"battery terminal post" Page 1 of 1

  • Speedway 18 Ft. Battery Cable
    Speedway 18 Ft. Battery Cable
    x
                

    Two-gauge standard copper battery wire with ends.  This kit is intended for use with top-post batteries. It contains a 2 ft. long negative battery cable with terminals on both ends. The 18 ft. positive cable has a terminal (post clamp) at the 'battery' end, and a terminal to crimp on the other end.

    Also included: 6 E-Z ties and 4 short pieces of shrink sleeve.

  • Flag Post Battery Terminal Connector, 2 Gauge Wire
    Flag Post Battery Terminal Connector, 2 Gauge Wire
    x
                These flag post battery ends are made of cast copper, tin plated for  added conductivity and to resist corrosion.  They are intended for use  with 2 gauge wire and will help give direction to your battery cables  with readable gauge and polarity stamped on each clamp.
    • Positive or Negative terminal
    • Will help give direction to your battery cables
    • Made to be used with 2 gauge wire
    • Crimp on
    • Made of cast copper, tin plated for added conductivity and to resist corrosion
    • Fasteners included
  • Top Post Battery Disconnect Switch
    Top Post Battery Disconnect Switch
    x
                

    A battery disconnect switch is the easiest, most convenient way to save battery life on vehicles that are being stored for extended periods of time. This compact battery kill switch is perfect for those projects with room on the top of the battery. Battery shut off switch installs directy to the negative post of your top post battery and connect your negative battery cable inline with the switch. Simply rotate the knob to cut power.

  • Moroso 74050 Sealed Battery Box
    Moroso 74050 Sealed Battery Box
    x
                Moroso's sealed plastic box is ideal for relocating a battery to the rear of any race, street or show  vehicle with or without a rear firewall. 
    • Holds a Series 21, 24, 26, 34, 42, 54, 55, 56, 61, 62, 63, 85, 86 and 96R battery with either top-post or side-post terminals
    • Outside Dimensions: 13-1/8" W, 11-1/8" D, 11-1/8" T
    • Fully approved for racing by NHRA, IHRA and SCCA
    • Includes all mounting hardware, rubber cable clamps and grommets
    • Air-tight lid is sealed with closed-cell foam gaskets to prevent battery gasses from entering vehicle
    • Injection molded polyethylene resists battery acid
    • Convenient quick-lock fasteners accessed from top, eliminating the need to reach under in tight spaces to secure nut
    • Vent tube carries battery gasses outside of vehicle
    • 3/8" steel hold-down rods keep battery secure 
    545-74050 Instructions (PDF)
  • Accel 1861 Top Post Battery Cable Ends, 2 Pack
    Accel 1861 Top Post Battery Cable Ends, 2 Pack
    x
                These ACCEL battery cable terminals feature easy-to-use compression fittings for 2-gauge wire.  They are made from heavy-duty lead and will maintain high conductivity with your battery.
    • Easy-to-use compression fitting
    • Will work with ACCEL Lightning cables.
    • For 2-gauge wire
    • Made from heavy-duty lead
  • NOCO Battery Products TF1N Flag Terminal for Negative Post
    NOCO Battery Products TF1N Flag Terminal for Negative Post
    x
                

    This terminal allows you to use two negative battery cables on one battery post. Made of sand cast copper for superior connections and lasting performance. Set up to be used with common 2 gauge battery cable wire. Must be soldered into place.

  • Taylor 21409 Side Post Battery Cable Terminal End Kit, 3/8 Inch Hole
    New
    Taylor 21409 Side Post Battery Cable Terminal End Kit, 3/8 Inch Hole
    x
                
    These tin plated copper compression battery cable terminals are cadium-plated for corrosion resistance and designed for a fast and easy install.  Simply strip your battery cable and apply these fittings to the cable and screw into your battery terminal.
    • Tin plated copper eyelet terminals
    • Cadium-plated for corrosion resistance
    • For 2 gauge wire
    • Sold 2 per pack
  • Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack
    New
    Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack
    x
                

    These tin plated copper compression battery cable terminals are cadium-plated for corrosion resistance and designed for a fast and easy install.  Simply strip your battery cable and apply these fittings to the cable and screw into your battery terminal.

    • Tin plated copper terminals
    • Cadium-plated for corrosion resistance
    • For 2 gauge wire
    • Sold 2 per pack
  • NOCO Battery Products TF1P Flag Terminal for Positive Post
    NOCO Battery Products TF1P Flag Terminal for Positive Post
    x
                

    This terminal allows you to use two positive battery cables on one battery post. Made of sand cast copper for superior connections and lasting performance. Set up to be used with common 2 gauge cable wire. Must be soldered in place.

  • Taylor Cable 20015 Diamondback Braided Stainless Battery Cable-15 Inch
    Taylor Cable 20015 Diamondback Braided Stainless Battery Cable-15 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20027 Diamondback Braided Stainless Battery Cable-27 Inch
    Taylor Cable 20027 Diamondback Braided Stainless Battery Cable-27 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20041 Diamondback Braided Stainless Battery Cable-41 Inch
    Taylor Cable 20041 Diamondback Braided Stainless Battery Cable-41 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Longacre 48115 Deluxe Racing Battery Cable Kit
    Longacre 48115 Deluxe Racing Battery Cable Kit
    x
                These kits are perfect for high output racing applications but will work with just about anything. They are designed for use with top post battery terminals and come complete with disconnect switch and heavy duty ground cable.  Installer must cut cable to desired lengths and then solder on the terminal ends provided.
    • 133 strand 1/0 pre-cut cables for entire system
    • Ends are factory soldered for a quick, simple installation
    • Includes solenoid and battery disconnect switch with panel
    • Starter cable is heat protected with Firebraid
    • Includes heavy duty 14" ground strap and all cables from battery to switch
    • Battery cable provided is 12.5 ft in length
  • Taylor Cable 20020 Diamondback Braided Stainless Battery Cable-20 Inch
    Taylor Cable 20020 Diamondback Braided Stainless Battery Cable-20 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20065 Diamondback Braided Stainless Battery Cable-65 Inch
    Taylor Cable 20065 Diamondback Braided Stainless Battery Cable-65 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20053 Diamondback Braided Stainless Battery Cable-53 Inch
    Taylor Cable 20053 Diamondback Braided Stainless Battery Cable-53 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20009 Diamondback Braided Stainless Battery Cable, 9 Inch
    Taylor Cable 20009 Diamondback Braided Stainless Battery Cable, 9 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Taylor Cable 20034 Diamondback Braided Stainless Battery Cable-34 Inch
    Taylor Cable 20034 Diamondback Braided Stainless Battery Cable-34 Inch
    x
                
    • Braided alloy shielding resists high heat and abrasion
    • Heavy 4 gauge, 100% copper with SXL insulation
    • Solid brass battery terminals are 3 times more conductive than lead
    • Accents braided lines and hoses
    • Post terminal clamp is 3/4"
  • Battery Cable Terminal End
    $4.99
    Battery Cable Terminal End
    x
                Universal battery terminal (post) ends for use with your battery cable. Works with #2 gauge cables.
            
  • Priority Start 12-Volt ProMax Deluxe Automatic Battery Protector
    Priority Start 12-Volt ProMax Deluxe Automatic Battery Protector
    x
                Please view the product's page for more information
            
  • Two Post Battery Disconnect Switch
    Two Post Battery Disconnect Switch
    x
                Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and  convenience.
    • 180 amp continuous, 1000 amp instantaneous
    • Die cast lever
    • Fits panel through 3/16" thick

    910-64500 Instructions (PDF)

  • Braille B3121 No-Weight Battery, 550 CCA
    Braille B3121 No-Weight Battery, 550 CCA
    x
                

    If you want all of the advantages of the Braille AGM battery but don't want to spend extra money for a carbon fiber case, the No-Weight series is just for you. At under 22 pounds, the B3121 is the lightest do-eveything battery. Using their advanced AGM racing technology, Braille has put a lot of power into this very small package.

    • No corrosion, no spill, no maitenance AGM design
    • Dual terminal design allows flexible mounting options
    • Heli-coil stainless steel threads allow higher bolt torque for a secure cable connection under extreme vibration
    • Comes fully charged and ready to install
  • Braille B2015 No-Weight Battery, 425 CCA
    Braille B2015 No-Weight Battery, 425 CCA
    x
                

    If you want all of the advantages of the Braille AGM battery but don't want to spend extra money for a carbon fiber case, the No-Weight series is just for you. At under 15 pounds, the B2015 is the most popular non-carbon racing battery. It is able to start larger engines easily for racing and offers daily driving capability for 4 cylinder motors with ease.

    • No corrosion, no spill, no maitenance AGM design
    • Dual terminal design allows flexible mounting options
    • Heli-coil stainless steel threads allow higher bolt torque for a secure cable connection under extreme vibration
    • Comes fully charged and ready to install
  • AFCO Master Disconnect Switch, 2-Post
    AFCO Master Disconnect Switch, 2-Post
    x
                Remote battery disconnect switch for safety requirements. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience.
    • 125 amp intermittent load (15 seconds)
    • 20 amp continuous service
    • 6 volt to 36 volt systems
    • 2-position switch
    • Die cast lever
    • Fits panel through 3/16" thick
  • Optima Batteries D34-78-950 Deep Cycle Yellow Top Battery, 870 CA
    Optima Batteries D34-78-950 Deep Cycle Yellow Top Battery, 870 CA
    x
                

    Discover the revolutionary new technology that has changed the way the world looks at batteries: Optima's famous Spiralcell Technology. The Yellow Top is a high power, dual purpose engine start and deep cycle lead acid battery. Optima batteries and are 100% maitenance free. Plus, with the unique sealed design, you can mount them in any position. 4 Post Design - two on top and two on the side.

    • Life span two to three times longer than the competition
    • Spiralcell design uses high purity lead plates wound with a glass mat that absorbs electrolyte like a sponge
    • True "Zero Maintenance" won't spill, leak or corrode
    • Never need to clean terminals or add water
    • Mounts in any position
    • Maximum vibration resistance

    For circle track / off road applications, the deep cycle yellow top Optima battery must be used.

  • Odyssey Batteries 3217-0006 Top Post For Odyssey Battery
    Odyssey Batteries 3217-0006 Top Post For Odyssey Battery
    x
                

    Convert your Odyssey battery terminals from M6 Bolt to SAE 3/8" Receptacles. 

    Works with Odyssey Batteries 131545 & 131680.

  • Four Post Battery Disconnect Switch
    Four Post Battery Disconnect Switch
    x
                

    Battery disconnect switch for safety and theft protection. Required for use with alternator cutoff by NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. This battery kill switch featues a die cast lever.

    Rated at 180 amp continuous, 1000 amp instantaneous.

    910-64501 Instructions (PDF)

  • XS Power D1600 16 Volt Battery, Deep Cycle
    XS Power D1600 16 Volt Battery, Deep Cycle
    x
                

    XS Power AGM batteries can save you weight and put the power where it is needed. These top shelf batteries are loaded with features, but are still 1" shorter than other 16 volt batteries which makes them easy to install in tight places.

    NOTE: When using a 16 volt battery, you will need to install a 16 volt to 12 volt step down box. The box allows you to run 12 volt items without burning them out. Also, be sure to use a charger designed for 16V batteries. 

    16 Volt Battery - Deep Cycle (913-D1000)

    • SAE Post Terminals included w/ 3/8" bolts
    • Strongest 16V AGM Battery Available
    • AGM Battery Technology
    • Longer Life
    • Superior Cranking
    • Fast Charge Capability
    • Vibration Resistant
    • Rugged ABS Case
  • XS Power S1600 16 Volt Battery, Starting
    XS Power S1600 16 Volt Battery, Starting
    x
                

    XS Power AGM batteries can save you weight and put the power where it is needed. These top shelf batteries are loaded with features, but are still 1" shorter than other 16 volt batteries which makes them easy to install in tight places.

    16 Volt Battery - Starting

    • SAE Post Terminals included w/ 3/8" bolts
    • Weighs only 30.5 lbs.
    • AGM Battery Technology
    • Longer Life
    • Superior Cranking
    • Fast Charge Capability
    • Vibration Resistant
    • Rugged ABS Case

    NOTE: When using a 16 volt battery, you will need to install a 16 volt to 12 volt step down box. The box allows you to run 12 volt items without burning them out. Also, be sure to use a charger designed for 16V batteries. 

  • Garage Sale - Moroso 74050 Sealed Battery Box
    Garage Sale
    Garage Sale - Moroso 74050 Sealed Battery Box
    x
                Please view the product's page for more information
            
  • GARAGE SALE - NOCO RIGHT ELBOW NEG POST 2 GA
    Garage Sale
    GARAGE SALE - NOCO RIGHT ELBOW NEG POST 2 GA
    x
                

    This left elbow positive terminal end is made of sand cast copper for superior connections and lasting performance.

    • Use with 2 gauge battery cable
    • Must be soldered in place
    • Exceeds SAE conductivity standards
    This is Garage Sale priced because no bolt hardware is included.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS