Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"barrel carb cfm" Page 1 of 4

  • Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    x
                Please view the product's page for more information
            
  • Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    x
                Please view the product's page for more information
            
  • Holley 0-80457S 4160 600 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80457S 4160 600 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Holley's Model 4160 4-barrel carburetors are designed for budget minded enthusiasts and are calibrated for use on stock to mildly modified engines. These classic Holley four barrel carbs feature all metal parts and vacuum secondaries. They have a universal throttle lever and power valve blow-out protection.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Electric choke
    • Single feed fuel inlet
    • Side hung float bowls
    • Power Valve Blow-Out Protection
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance
    • “Next Gen” needle & seat design eliminates the need for external float level adjustment

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Willys Carbs WCD80787-2 Racing 2 Barrel Carburetor, 350 CFM
    Willys Carbs WCD80787-2 Racing 2 Barrel Carburetor, 350 CFM
    x
                Willy's 2 barrel carbs make much more power than stock, but retain the stock appearance and will pass tech. This 350 CFM Stage II two barrel carburetor is approved for IMCA classes that allow the 350 CFM Holley 2 barrel carbs.

    This Willy's 350 CFM 2 barrel Carburetor has a stock appearance with a custom calibrated metering system. The Stage 2 is 18 horse power better than the Holley HP. These are popular on NASCAR late models and are IMCA legal.

    IMCA approved.
  • Two Plain 9 Super 7   Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    Two Plain 9 Super 7 Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Willys Carbs WCD44120 500 CFM 2-Barrel Racing Carburetor
    Willys Carbs WCD44120 500 CFM 2-Barrel Racing Carburetor
    x
                Willy's two barrel carbs make much more power than stock, but retain the stock appearance and will pass tech. 

    This 500 CFM 2 barrel carburetor has a 1-3/8" venturi and 1-11/16" throttle plate. It uses the standard Holley metering block. These 2 barrel carbs will pass tech gauges and produces great torque and horsepower. They are popular on NASCAR late models and are IMCA & WISSOTA Legal. This two barrel carburetor has "LIST 4412-2" stamped on it, and looks stock.

    IMCA approved.
  • Edelbrock 14053 Performer 600 CFM 4 Barrel Carb, Manual Choke, Black
    Edelbrock 14053 Performer 600 CFM 4 Barrel Carb, Manual Choke, Black
    x
                Please view the product's page for more information
            
  • Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    x
                Please view the product's page for more information
            
  • Edelbrock 14063 Performer 600 CFM 4 Barrel Carb, Electric Choke, Black
    Edelbrock 14063 Performer 600 CFM 4 Barrel Carb, Electric Choke, Black
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). 

    These Performer Series carburetors with black powder coated finish feature gold iridited linkage and hardware that complements the new finish. When matched with Edelbrock's black powder coated intake manifolds, water pumps and accessories, they give any engine bay a custom appearance.

    This new finish will also give these carburetors a durable protective layer that will keep them looking great for many years. All Edelbrock Performer Series carburetors feature factory set float levels that rarely need ad

  • Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor, Manual Choke
    Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Holley's new Model 4160 600 CFM aluminum street four barrel carburetor is constructed from aluminum, which compared to its zinc counterpart equates to a weight savings of over 5 lbs. This Holly carburetors new aluminum will hold its shine and can also be hand polished for a custom look.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Manual choke
    • Single feed fuel inlet
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1806 Thunder Series AVS 650 CFM 4 Barrel Carb-Electric Choke
    Edelbrock 1806 Thunder Series AVS 650 CFM 4 Barrel Carb-Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. This four barrel carb matches with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1803 Dual Quad 4 Barrel Carburetor, 500 CFM, Electric Choke
    Edelbrock 1803 Dual Quad 4 Barrel Carburetor, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle.This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80805HB Ultra HP Gas 950 CFM 4 Barrel Carburetor
    Holley 0-80805HB Ultra HP Gas 950 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ four barrel Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 950 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1805 Thunder Series AVS 650 CFM 4 Barrel Carburetor, Manual
    Edelbrock 1805 Thunder Series AVS 650 CFM 4 Barrel Carburetor, Manual
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1801 AVS 4 Barrel Carburetor, 500 CFM, Electric Choke
    Edelbrock 1801 AVS 4 Barrel Carburetor, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-1850C 4160 Street 600 CFM 4 Barrel Carburetor, Manual Choke
    Holley 0-1850C 4160 Street 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Holley's Model 4160 four barrel carburetors are designed for budget minded enthusiasts and are calibrated for use on stock to mildly modified engines. These classic Holley 4 barrel carbs features all metal parts and vacuum secondaries. They have a universal throttle lever and power valve blow-out protection. Dichromate finish for corrosion resistance and a traditional, period look.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Manual choke
    • Single feed fuel inlet
    • Side hung float bowls
    • Power Valve Blow-Out Protection
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance
    • “Next Gen” needle & seat design eliminates the need for external float level adjustment

    Holley 600 CFM 4 Barrel Carburetor Installation Insturctions (PDF)

  • Edelbrock 18034 Endurashine Dual Quad 500 CFM 4 Barrel Carb, Electric
    Edelbrock 18034 Endurashine Dual Quad 500 CFM 4 Barrel Carb, Electric
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Pair of Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetors, Plain
    Pair of Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetors, Plain
    x
                Please view the product's page for more information
            
  • Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    Holley 0-80804HB Ultra HP Gas 4 Barrel Carburetor, 850 CFM
    x
                

    Holley HP™ four barrel Carburetors have been the standard in racing carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 850 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    Holley 0-80802HB Ultra HP Gas 650 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80801HB Ultra HP Gas 600 CFM 4 Barrel Carburetor
    Holley 0-80801HB Ultra HP Gas 600 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-4777C 4150 Double Pumper 650 CFM 4 Barrel Carb, Manual Choke
    Holley 0-4777C 4150 Double Pumper 650 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetors dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lighweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Two corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80541-1 HP Crate Racing 650 CFM 4 Barrel Carburetor
    Holley 0-80541-1 HP Crate Racing 650 CFM 4 Barrel Carburetor
    x
                

    Race ready right out of the box! Part of Holley's 4150 HP Series, this gasoline 650 cfm four barrel carb is NASCAR crate engine approved for use in Late Model classes. It has progressive mechanical secondaries, contoured venturi inlets, screw-in air bleeds, high-flow metering blocks, non-stick gaskets, lightweight slotted mixture screws, center-hung Dominator-style fuel bowls, and other great features.

    • Contoured Venturi entry angles and symmetrical venturi bores
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.25"
    • Throttle bore: 1.688"

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80803HB Ultra HP Gas 750 CFM 4 Barrel Carburetor
    Holley 0-80803HB Ultra HP Gas 750 CFM 4 Barrel Carburetor
    x
                

    Holley HP™ Carburetors have been the standard in racing four barrel carburetors for nearly two decades. So how do you make them better? You make them 38% lighter, increase the fuel capacity by 20% and add 30 other new features! They're available in an all–new Hard Core Gray™ hard coat anodized finish with Black™ billet for superior corrosion protection.

    New Features! (LINK)

    Note: Fuel inlets are spaced 9.75" on center which will require a lengthened fuel line / fuel log arrangement. Fuel bowl inlets feature -8 AN O-ring port fittings to allow for a large variety of plumbing options. Fuel bowl can be plumbed from either side.

    Holley 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80528-1 HP Series 750 CFM Gas 4 Barrel Carburetor
    Holley 0-80528-1 HP Series 750 CFM Gas 4 Barrel Carburetor
    x
                

    Holley's HP Series four barrel carburetors set the standard in oval track race carbs. These performance calibrated gasoline four barrel carbs are race ready, right out of the box. The Model 4150 HP 4 barrel carb is packed with premium features like contoured air entries, high strength castings, and stainless throttle plates, all of which will provide you with a definite advantage at the track.

    • Calibrated for gasoline
    • Dichromate finish
    • Contoured Venturi entry angles and symmetrical venturi bores
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Spun-in down leg style boosters
    • High strength sealing surfaces
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.376"
    • Throttle bore: 1.687"

    Holley 750 4 Barrel Carb Installation Instructions (PDF)

  • Holley 0-80535-1 HP Series 750 CFM Alcohol 4 Barrel Carburetor
    Holley 0-80535-1 HP Series 750 CFM Alcohol 4 Barrel Carburetor
    x
                

    Holley's HP Series methanol four barrel carburetors set the standard in oval track race carbs. These performance calibrated alcohol four barrel carbs are race ready, right out of the box. The Model 4150 HP 4 barrel carb is packed with premium features like contoured air entries, high strength castings, and stainless throttle plates, all of which will provide you with a definite advantage at the track.

    • Calibrated for Methanol
    • Dichromate finish
    • Contoured Venturi inlet
    • Booster venturi is a down-leg, double step design providing a considerably stronger vacuum signal
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Spun-in down leg style boosters
    • High strength sealing surfaces
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.376"
    • Throttle bore: 1.688"

    Holley 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1802 Thunder Series AVS 500 CFM 4 Barrel Carburetor, Manual
    Edelbrock 1802 Thunder Series AVS 500 CFM 4 Barrel Carburetor, Manual
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for a limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1403 Performer 500 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1403 Performer 500 CFM 4 Barrel Carburetor, Electric Choke
    x
                Please view the product's page for more information
            
  • Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    For Holley 600 CFM electric choke, side hung float bowl.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve 
    • Step-By-Step Instructions
    • Detailed Tuning Guide
    427-37119 Instructions (PDF)
  • Edelbrock 18044 Endurashine Dual Quad 500 CFM 4 Barrel Carb-Man. Choke
    Edelbrock 18044 Endurashine Dual Quad 500 CFM 4 Barrel Carb-Man. Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock Dual Quad 4 Barrel Carb Installation Instructions (PDF)

  • Holley 4776C 4150 Double Pumper 600 CFM 4 Barrel Carb, Manual Choke
    Holley 4776C 4150 Double Pumper 600 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetor's dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lightweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Four corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 600 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 37-474 2 Barrel 500 CFM Rebuild Kit
    Holley 37-474 2 Barrel 500 CFM Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    Fits Holley Model 2300 500cfm two barrel carburetors ONLY.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve
    • Instructions

    427-37474 Instruction Sheet (PDF)

  • Holley 0-4779C 4150 Double Pumper 750 CFM 4 Barrel Carb, Manual Choke
    Holley 0-4779C 4150 Double Pumper 750 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetors dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lighweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Four corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 750 4 Barrel Carburetor Installation Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4