Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"banjo brake kits" Page 1 of 2

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Banjo Brake Fitting Kit, 10mm-1.5 to -3 AN
    Banjo Brake Fitting Kit, 10mm-1.5 to -3 AN
    x
                

    One part number gets you all the parts needed to hook a -3 AN style line to a GM caliper threaded 10mm-1.5. Each kit includes 2 banjo bolts, 2 banjo fittings, and 5 washers. Each kit services 2 calipers.

    Note:  Speedway Motors offers Metric GM calipers threaded with either a 10mm-1.5 or a 7/16"-20 inlet thread.  Please check caliper application for proper fitting requirement.

  • Speedway IMCA Mod Brake Kit
    $489.99
    Speedway IMCA Mod Brake Kit
    x
                Our affordable Speedway brake system comes with everything you'll need for your IMCA racer.

    Kit includes:
    • GM Metric Clamp-on Calipers
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolt
    • 7/16" to AN4 Banjo Fitting
    • 7/16"-20" Banjo Bolt
    • 18" Brake Line w/ Straight
    • 26" Brake Line w/ 90° End
    • 3/8"-24 Female to AN4 Fitting
    • Lightweight Brake Line Kit
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Jet Mod Brake Kit
    $699.99
    Jet Mod Brake Kit
    x
                This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. Comes with everything that you'll need to set up your IMCA racers braking system.

    Kit includes:
    • 7/16"-20" RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolts
    • GM Metric Clamp-on Caliper Bolts
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Bolts
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fitting
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
    • RH & LH Front Caliper Bracket
  • Rubber Brake Line Hose Set for 7/16 Inch-20 Calipers
    Rubber Brake Line Hose Set for 7/16 Inch-20 Calipers
    x
                

    These front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

    For 7/16"-20 calipers. This hose comes with banjo bolts, but not crush washers.

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips.

    • 15" length including fittings
    • 3/8"-24 IFF and 10mm-1.5
    • For 1978-1988 GM Calipers

    Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Rubber Front Brake Lines & Fitting Kit, 7/16-20
    Rubber Front Brake Lines & Fitting Kit, 7/16-20
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips.

    • 18" lines including fittings
    • 3/8"-24 IFF and 7/16"-20

    Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Banjo Brake Fitting Kit, 10mm-1.5 to -4 AN
    Banjo Brake Fitting Kit, 10mm-1.5 to -4 AN
    x
                

    One part number gets you all the parts needed to hook a -4 AN style line to a GM caliper threaded 10mm-1.5. Each kit includes 2 banjo bolts, 2 banjo fittings, and 5 washers. Each kit services 2 calipers.

    Note:  Speedway Motors offers Metric GM calipers threaded with either a 10mm-1.5 or a 7/16"-20 inlet thread.  Please check caliper application for proper fitting requirement.

  • Banjo Brake Fitting Kit, 7/16-20 to -4 AN
    Banjo Brake Fitting Kit, 7/16-20 to -4 AN
    x
                One part number gets you all the parts needed to hook a -4 AN style line to a GM caliper. Each kit includes 2 banjo bolts, 2 banjo fittings, and 5 washers. Each kit services 2 calipers.
            
  • Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    x
                

    This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

    Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

    Banjo bolts and crush washers are included. 

    One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Emergency Brake Calipers
    $99.99
    Product Rating: 5.00 Stars
    Emergency Brake Calipers
    x
                These 1978-up GM Metric calipers accept either GM or Lokar type emergency brake cables. The fluid inlets are tapped to accept 7/16-20 banjo fittings. Includes the bracket to attach the emergency brake cable, slider bolts, and brake pads. 

    The bleeder hole is 10mm x 1.5. If speed bleeders are needed, use our part number 6173958. Mount bolt spacing is 5.45".

    910-31046 Instructions (PDF)

  • Banjo Brake Fitting Kit, 3/8-24 to -3 AN
    Banjo Brake Fitting Kit, 3/8-24 to -3 AN
    x
                One part number gets you all the parts needed to hook a -3 AN style line to a GM caliper. Each kit includes 2 banjo bolts, 2 banjo fittings, and 5 washers. Each kit services 2 calipers.
            
  • Banjo Brake Fitting Kit, 3/8-24 to -4 AN
    Banjo Brake Fitting Kit, 3/8-24 to -4 AN
    x
                One part number gets you all the parts needed to hook a -4 AN style line to a GM caliper. Each kit includes 2 banjo bolts, 2 banjo fittings, and 5 washers. Each kit services 2 calipers.
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • Rubber Brake Line Hose Set for 10mm-1.5 Calipers
    Rubber Brake Line Hose Set for 10mm-1.5 Calipers
    x
                

    These 15" front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers.

    Note: Hose banjo bolts sold separately.

  • Big Bore GM Metric 1978-88 Brake Caliper
    Big Bore GM Metric 1978-88 Brake Caliper
    x
                

    If you are using 1978-88 GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By using a larger 2-3/4" piston you will increase the braking force at a wheel over a wheel using a smaller piston.

    Bleeder and inlet are both 10mm-1.5 inlet allowing the caliper to be used on either side. Plus, these calipers have been ground smooth to make them easier to paint.

    Includes pads and hardware. Sold as EACH.

    • 20% increase in stopping power over stock calipers
    • Can used on the left and right sides
    • Extra ribs have been added internally while unnecessary weight was removed
    • Lighter, stronger, has more stopping power than OEM calipers
    • Each caliper includes:
      • brake pads
      • clips
      • slide pins
      • banjo bolt
      • washers
      • bleeder screw
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • AFCO 7010-0010 Brake System 7/16 Banjo to 3 AN Fitting
    AFCO 7010-0010 Brake System 7/16 Banjo to 3 AN Fitting
    x
                

    Brake system fittings to complete your brake plumbing project.

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Dirtworks 4-Link Brake Kit
    $589.99
    Dirtworks 4-Link Brake Kit
    x
                This Dirtworks 4-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
  • Dirtworks 2-Link Brake Kit
    $609.99
    Dirtworks 2-Link Brake Kit
    x
                This Dirtworks 2-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • Caliper Brackets
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90 Degree Ends
    • 26" Brake Line w/ 90 Degree Ends
    • Mini Brake Gauge Panel
  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Goodridge 775-44P Steel 7/16 Inch x 24 Brake Banjo Bolt
    Goodridge 775-44P Steel 7/16 Inch x 24 Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 7/16 Inch x 24
    • For use with banjo fittings
    • Overall Length : 1.04 "
    • Under Head Length : .86 "
    • Thread Length : .55 "
    • Thread Pitch : 7/16-24
    • Wrench Type : Hex
    • Material Type : Steel
    • Finish : Zinc 

    Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 24 Threads Per Inch (TPI).

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 on 4-3/4 Granada Type Rotor
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4"  rotors to 11" rotors with powerful single piston GM Metric style floating  calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat  and Mustang II factory spindles.  
    • GM bolt pattern 5 on 4-3/4" (increases track width 1/2" per side)
    • Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers
    • Granada style rotors

    Front Disc Brake Installation Instructions (PDF)

  • 1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit
    1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit
    x
                

    Want to lower your 1963-70 Chevy truck, get better brakes and improve your wheel selection, all at the same time? This bolt-on package is for you! It includes new 2-1/2" drop spindles that will bolt to stock ball joints and tie rods, making it simple to swap disc brakes. The kit also includes new brake rotors with popular 5-on 5-lug pattern (with 1/2" studs,) plus calipers, bearings, seals, spindle nuts, dust caps, banjo bolts and brake hoses. Kits may not work with factory drum brake wheels.

    Only for 1/2 ton trucks 

  • Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

    NSRA Legal

    910-31933 Instructions (PDF)

  • Steel 10MM x 1.25 Inch Brake Banjo Bolt
    Steel 10MM x 1.25 Inch Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 10MM x 1.25 Inch
    • For use with banjo fittings and crush washers.
  • Steel 10MM x 1.00 Inch Brake Banjo Bolt
    Steel 10MM x 1.00 Inch Brake Banjo Bolt
    x
                

    These brake banjo bolts are designed to fit your OEM brake lines and calipers. They are manufactured from quality materials and then plated to resist corrosion. These brake banjo bolts give you leak-free performance and consistent fluid pressure delivered to your brake caliper.

    Brake Banjo Bolt

    • Steel
    • 10MM x 1.00 Inch
    • For use with banjo fittings and crush washers.
Goto Previous PagePrevious Page
1 2