Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"aluminum carb spacer" Page 1 of 1

  • 1 Inch Aluminum Open Carburetor Spacer
    1 Inch Aluminum Open Carburetor Spacer
    x
                

    Carb spacers are a quick & easy way to improve the performance of your engine. Spacers lengthen the intake plenum increasing it's volume, and speeding up flow. This cast aluminum 1" tall open carb spacer has dual bolt patterns, so it will work with Holley, Demon, Edelbrock, Autolite, and Carter AFB carburetors. Includes two gaskets and hardware. 

    • Open center port
    • Universal 4 barrel carbs
  • 2.3 Ford 2 Barrel 1-1/2 Inch Carburetor Spacer
    2.3 Ford 2 Barrel 1-1/2 Inch Carburetor Spacer
    x
                

    This 1-1/2" billet aluminum carb spacer bolts to your 2.3 Ford intake and accepts a 350 or 500 Holley 2 bbl.

    This is the spacer only. Gaskets or studs are not included. This spacer is designed to be used on the 2.3L Ford after removal of the EGR adaptor plate.

    The bolt pattern on this part is 5 1/8" x 3 1/2."

  • Aluminum Open Carburetor Spacer, 4 Inch
    Aluminum Open Carburetor Spacer, 4 Inch
    x
                

    Aluminum Holley open carb spacer. Does NOT include gaskets or studs/hardware.

    • Open center port
    • Holley 4 barrel carburetors
  • High Rise Aluminum 1 Inch Carb Spacer
    High Rise Aluminum 1 Inch Carb Spacer
    x
                

    The High Rise Aluminum Spacer is 1" thick with an open chamber for Quadra-Jet Carburetors. Comes with gaskets and hardware.

    • Open center design
    • Fits 4 barrel Quadra-Jet Carbs
  • Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    x
                

    These Holley 4 Hole Spacers have a 1" rise and fit Holley 4150 and 4160.  Aluminum construction. Comes with gaskets and mount studs. Hole size tapers from approximately 1.65" to 1.71".

    • Tapered 4-hole design
    • Fits 4 barrel Holley carburetors
  • Banjo Fitting Spacer for Ford 94 Carb
    Banjo Fitting Spacer for Ford 94 Carb
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require these spacers when using banjo fuel fittings, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    • Teflon washer seals the banjo
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish
  • Aluminum Open Carb Spacer, 2 Inch
    Aluminum Open Carb Spacer, 2 Inch
    x
                

    Aluminum Holley open carb spacers. Includes gaskets and hardware.

    • Open center design
    • 4 barrel Holley carburetors
  • Billet 2BBL Spacer, Q-jet Intake
    Billet 2BBL Spacer, Q-jet Intake
    x
                Not all carb spacers are created equal!  These are not just a cheap "fits all" parts.  Our billet aluminum carburetor spacers are CNC machined to fit your manifold perfectly.
    • Gain up to 17 horsepower over competing adaptors
    • 1" tall
  • Billet 2BBL Spacer, Single Plane
    Billet 2BBL Spacer, Single Plane
    x
                Not all carb spacers are created equal!  These are not just a cheap "fits all" parts.  Our billet aluminum carburetor spacers are CNC machined to fit your manifold perfectly.
    • Gain up to 17 horsepower over competing adaptors
    • 1" tall
  • Billet 2BBL Spacer, Dual Plane
    Billet 2BBL Spacer, Dual Plane
    x
                Not all carb spacers are created equal!  These are not just a cheap "fits all" parts.  Our billet aluminum carburetor spacers are CNC machined to fit your manifold perfectly.
    • Gain up to 17 horsepower over competing adaptors
    • 1" tall
  • Plastic Open Carburetor Spacer, 1 Inch
    Plastic Open Carburetor Spacer, 1 Inch
    x
                These open center carburetor spacers are designed to fit Holley 4150/4160 bolt pattern 4 barrel carbs. They are IMCA approved and are made to reduce heat conductivity for optimum performance.
    • Plastic spacer reduces heat conductivity 10 times greater than aluminum
    • Results in a denser, more powerful fuel charge to the manifold
    • Fits Holley 4150/4160 bolt pattern
    • IMCA approved
    • Includes studs, nuts & washers (gaskets not included)
  • Stromberg Air Cleaner Spacers, 2-5/8 Inch
    Stromberg Air Cleaner Spacers, 2-5/8 Inch
    x
                These aluminum air cleaner spacers are specifically designed to work with Stromberg carburetors.  They fit 2-5/8" diameter carbs and come in three different heights to fit your preference. 
    • Fits 2-5/8" neck carbs
    • Choose from 1", 2" or 3" height
    • Precision machined aluminum
    • Secures with 10-32 set screw
    • Add another dimension to your multi-carb setup
  • Sure Seal Air Cleaner Assembly, 14 Inch
    Sure Seal Air Cleaner Assembly, 14 Inch
    x
                

    Speedway's Sure Seal Housing is manufactured from spun aluminum with an O-ring seal. Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4".

    Includes air cleaner assembly, a spacer with an O-ring on the carburetor side (choose height), and a 1/4"-20 air cleaner stud.

  • Offenhauser 1078 1949-1953 Ford Flathead 4-Barrel Intake Manifold
    Offenhauser 1078 1949-1953 Ford Flathead 4-Barrel Intake Manifold
    x
                

    This Offy single 4-barrel intake fits the 1949-53 Ford V-8 and features a Carter WCFB bolt pattern. For best results, our techs recommend the Holley 390 CFM 4-BBL which requires the Holley Flathead adapter 135-1935B.

    You may also need to purchase 560-6091, 4" tall carb spacer (in addition to 135-1935B) to use a Holley carb on this intake. The spacer gets the carb high enough so that the base will clear the water hoses.

    • For 1949-53 Ford Flathead, 4-barrel carbs 
    • Requires Holley carb, adaptor, and spacer for best results

     

  • Offenhauser 1079 1932-1948 Ford Flathead 4-Barrel Intake Manifold
    Offenhauser 1079 1932-1948 Ford Flathead 4-Barrel Intake Manifold
    x
                

    This Offy single 4-barrel intake fits the 1932-48 Ford V-8 and features a Carter WCFB bolt pattern. For best results, our techs recommend the Holley 390 CFM 4-BBL which requires the Holley Flathead adapter 135-1935B.

    You may also need to purchase 560-6091, 4" tall carb spacer (in addition to 135-1935B) to use a Holley carb on this intake. The spacer gets the carb high enough so that the base will clear the water hoses.

    • For 1932-48 Ford Flathead, 4-barrel carbs 
    • Requires Holley carb, adaptor, and spacer for best results
  • Trans-Dapt 2180 Phenolic Open Carburetor Spacer, 1/2 Inch
    Trans-Dapt 2180 Phenolic Open Carburetor Spacer, 1/2 Inch
    x
                These open center, 4 barrel carb spacers are designed to fit Holley 4150/4160 bolt pattern.  They are IMCA approved and are made to reduce heat conductivity for optimum performance.
    • Phenolic insulating spacer reduces heat conductivity 10 times greater than aluminum
    • Results in a denser, more powerful fuel charge to the manifold
    • Fits Holley 4150/4160 bolt pattern
    • IMCA approved
    • Includes gaskets, studs, nuts & washers
  • HVH Super Sucker 604 Carburetor 4-Hole Spacer, 5/8 Inch
    HVH Super Sucker 604 Carburetor 4-Hole Spacer, 5/8 Inch
    x
                

    Designed by Joe Petelle at HVH over 15 years ago for Winston Cup engines, this spacer will increase air speed from the base of the carburetor to the top of the intake valve, pulling more fuel from the carburetor, the Super Sucker will require a change in the size jet currently being used. E.T. is reduced as much as 1/10 of a second and lap times reduced as much as 2/10 of a second.

    Improvements in the throttle response, driveability, top end horsepower and torque are commonplace when using a Super Sucker.

    This 5/8" aluminum spacer is specifically designed for the 604 crate engine and gives more low end and mid range torque without reducing top end torque.

  • Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    Moroso 64945 Phenolic Insulating Carb Spacer for Holley 390
    x
                

    Phenolic material is a type of plastic resin which has excellent insulating properties, so it will keep the fuel in your 4 barrel Holley 4150/4160 cooler for more power. For 390 CFM carbs with 1.467" diameter bores.

    • Specially formulated material reduces heat conductivity 10 times greater than aluminum
    • Reduces fuel temperature inside the carburetor
    • Denser, more powerful fuel charge to the manifold
    • 4 hole plenum design
    • 1/2" height
    • Gaskets not included
  • Universal Carb Adapter, Tapered Port
    Universal Carb Adapter, Tapered Port
    x
                Adapts all  '50s style 1-7/16" WCFB or 4 Jet carbs with smaller base pattern to all large and medium base 1-11/16" port  or open 4 barrel carb manifolds. This tapered port carburetor adapter comes with gaskets for the top and bottom as well as all mount hardware. 
    • 7/16" thick spacer
    • 4 Barrel Carburetors
    • Tapered 4-hole port
  • Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish
    • Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.
  • Sure Seal O-Ring Air Cleaner Spacer
    From: $4.99
    Product Rating: 5.00 Stars
    Sure Seal O-Ring Air Cleaner Spacer
    x
                

    This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.

    Available in three heights: 1/2", 1" or 2".

  • Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine with a 32 micron polished finish

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

  • Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Edelbrock 2999 Tall Victor Jr. Small Block Chevy Manifold
    Edelbrock 2999 Tall Victor Jr. Small Block Chevy Manifold
    x
                

    Designed for competition Small Block Chevy V8s used in all forms of racing, the Victor Jr. Tall intake manifold incorporates Edelbrock's extensive knowledge in induction technology. Victor Jr. Series manifolds provide excellent mid-range to top-end horsepower, resulting in race-winning performance. All Victor Jr. manifolds offer extra material added for port matching and customizing, square bore carburetor flange, and water crossovers drilled and tapped for temp senders/bypass holes.

    Use the Victor Jr. Tall for the 3500-8000 RPM range when carburetor spacers are not allowed. This manifold is 1" taller than the regular Victor Jr. (at right) and also provides maximum performance for engines with standard port location, iron and aluminum cylinder heads.

    Small Block Chevy Intake Manifold Installation Instructions (PDF)

  • Adjustable Holley 2300/Rochester 2G Two Barrel Carb Adapter
    Adjustable Holley 2300/Rochester 2G Two Barrel Carb Adapter
    x
                

    This set of aluminum intake adapter plates allows you to adapt a Rochester 2G 2 barrel or Holley 2300 series two barrel carburetor onto a 4 barrel intake manifold and adjust it forward or back on manifold. The carb spacer plates feature an open design to increase plenum volume which improves top end performance. When assembled the adapter will measure 1" tall.

    Kit includes carb adapters, gaskets and all necessary hardware.

  • Sure Seal Air Cleaner Base Only, 14 Inch
    Sure Seal Air Cleaner Base Only, 14 Inch
    x
                

    Speedway's Sure Seal air cleaner base is manufactured from spun aluminum. Fits Holley carbs. Uses standard 14" diameter filters, sold separately. Minimum filter height required is 4".

    • Base has a 1-1/2" drop
    • Distance from the carb neck to top with .5" spacer and 4" filter = 4.25"

     

  • Garage Sale - Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    Garage Sale
    Garage Sale - Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    x
                

    These Holley 4 Hole Spacers have a 1" rise and fit Holley 4150 and 4160.  Aluminum construction. Comes with gaskets and mount studs. Hole size tapers from approximately 1.65" to 1.71".

    • Tapered 4-hole design
    • Fits 4 barrel Holley carburetors
    This carb spacer is garage sale priced because it has pits and scratches on both sides.
     
     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - 1 Inch Aluminum Open Carburetor Spacer
    Garage Sale
    Garage Sale - 1 Inch Aluminum Open Carburetor Spacer
    x
                

    Carb spacers are a quick & easy way to improve the performance of your engine. Spacers lengthen the intake plenum increasing it's volume, and speeding up flow. This cast aluminum 1" tall open carb spacer has dual bolt patterns, so it will work with Holley, Demon, Edelbrock, Autolite, and Carter AFB carburetors. Includes two gaskets and hardware. 

    • Open center port
    • Universal 4 barrel carbs 

     

    This is garage sale priced because it is missing the nuts and has been used.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Banjo Fitting Spacer for Ford 94 Carb
    Garage Sale
    Garage Sale - Banjo Fitting Spacer for Ford 94 Carb
    x
                Please view the product's page for more information
            
  • Garage Sale - Aluminum Carb Adapter Holley 4BBL to Ford 460
    Garage Sale
    Garage Sale - Aluminum Carb Adapter Holley 4BBL to Ford 460
    x
                

    One inch thick aluminum carb spacer for Holley 4 Barrel to Ford 460 V8.

    Includes gaskets, studs, nuts, and washers.

    Can use stock Ford EGR casting if desired.

    Drilled and tapped for PCV. 

     

    This item is garage sale priced because it's old stock.

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**   

  • Rochester 2G Air Cleaner Adapter
    Rochester 2G Air Cleaner Adapter
    x
                
    • Allows you to use common 5-1/8" 4 bbl. air cleaner on your Rochester 2G 2 bbl. carburetor 
    • Billet aluminum
    • Must be modified or used with a spacer on 2GC models
  • Garage Sale - Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    Garage Sale
    Garage Sale - Dual Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                Please view the product's page for more information
            
  • Garage Sale - Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    Garage Sale
    Garage Sale - Single Banjo Style Fuel Fitting, 5/16 Inch Hose
    x
                Please view the product's page for more information
            
  • Edelbrock 2975 Victor Jr. Small Block Chevy Manifold
    Edelbrock 2975 Victor Jr. Small Block Chevy Manifold
    x
                

    Edelbrock's Victor Series intake manifolds set the standard for quality and performance in the industry. This Victor Jr. unit is designed for 262-400 c.i. small block Chevy V8s operating in the 3500-8000 rpm range. These versatile manifolds are excellent for many applications from high-performance street to drag/circle track racing. They provide maximum performance for engines with standard port location, iron and aluminum cylinder heads.

    All Victor Jr. manifolds offer extra material added for port matching and customizing, square bore carburetor flange, and water crossovers drilled and tapped for temp senders/bypass holes.

    325-2975 Instructions (PDF)

  • Sure Seal Offset Air Cleaner Housing
    Sure Seal Offset Air Cleaner Housing
    x
                

    This air cleaner is designed to work with 2-barrel Holley carbs with a 5-1/8" neck. Housing is offset 1-1/2" to clear cam covers or other obstructions. It does not clear the float bowl on a 4-barrel Holley "double pumper" carburetor.

    Includes special offest air cleaner stud and 1/2" Sure Seal O-ring spacer. Accepts standard 14" diameter air filter elements (sold separately).

  • Garage Sale - Trans-Dapt 2180 Phenolic Open Carburetor Spacer, 1/2 Inch
    Garage Sale
    Garage Sale - Trans-Dapt 2180 Phenolic Open Carburetor Spacer, 1/2 Inch
    x
                These open center, 4 barrel carb spacers are designed to fit Holley 4150/4160 bolt pattern.  They are IMCA approved and are made to reduce heat conductivity for optimum performance.
    • Phenolic insulating spacer reduces heat conductivity 10 times greater than aluminum
    • Results in a denser, more powerful fuel charge to the manifold
    • Fits Holley 4150/4160 bolt pattern
    • IMCA approved
    • Includes studs, nuts & washers

      

    This is garage sale priced because it does not include gaskets. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Speedway Sure Seal O-Ring Spacer, 2-1/4 Inch Rise
    Garage Sale
    Garage Sale - Speedway Sure Seal O-Ring Spacer, 2-1/4 Inch Rise
    x
                

    Sealing ring is available in 2-1/4" rise height. Sealing Ring has o-ring on carburetor side only.

     

    • 2 1/4" RISE
    • LIGHTWEIGHT ALUMINUM CONSTRUCTION
    • REPLACEABLE O-RING INCLUDED
    • KEEPS DIRT & GRIT OUT
    • ATTACHES TO AIR FILTER HOUSING
     

     

     

    This spacer is garage sale priced because we do not usually offer these in 2-1/4" rise height.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS