Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"aluminum angle heads" Page 1 of 2

  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, Multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Multi angle valve job
    • Bronze guides
    • 3/8" screw-in studs and guide plates
  • Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    x
                

    You don't need to spend a fortune to get a set of top-performing, lightweight aluminum cylinder heads for your small-block Ford V8. These Flo-Tek heads have a long list of high-end features, minus the hefty price tag. Sold as complete assemblies only.

    • 180cc intake runners
    • 62cc exhaust runners
    • 1.94" intake and 1.54" swirl-polished exhaust valves
    • 58cc chambers
    • Performance valve springs (.550 lift)
    • 115 lbs. spring seat pressure
    • Compatible with most flat tappet camshafts
    • Hardened locks and retainers
    • PC seals
    • High-temp exhaust seats
    • Multi angle valve job
    • Bronze guides
    • 3/8" rocker studs and guide plates

    See how these Flo-Tek heads stack up against the competition in Car Craft Magazine's tech article; 6 Small Block Ford Cylinder Heads That Work.

    Head Flow Specs:

    Lift        Intake        Exhaust
    .400      209          137
    .500      223          161
    .600      248          191

  • Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Edelbrock 60819 348/409 Chevy Aluminum Cylinder Heads
    Edelbrock 60819 348/409 Chevy Aluminum Cylinder Heads
    x
                

    These heads are for your '61-'65 348-409 W-Series Chevy engine. They weigh about half what a cast iron head does and are bolt-on. The 220cc intake and 90cc exhaust runners with 2.19" intake and 1.72" exhaust valves will give you a big increase in performance. They are a great match for the large port intakes and are shipped assembled.

    They can be used on 348 engines if limited to a .550" lift. 

    325-60819 Instructions  (PDF)


  • Book/Manual - David Vizard's How to Port & Flow Test Cylinder Heads
    Book/Manual - David Vizard's How to Port & Flow Test Cylinder Heads
    x
                Porting heads is an art and science. It takes a  craftsman's touch to shape the surfaces of the head for the optimal flow  characteristics and the best performance. Porting demands the right  tools, skills, and application of knowledge. Few other engine builders  have the same level of knowledge and skill porting engine heads as David  Vizard. All the aspects of porting stock as well as aftermarket heads  in aluminum and cast-iron constructions are covered. Vizard goes into  great depth and detail on porting aftermarket heads. Starting with the  basic techniques up to more advanced techniques, you are shown how to  port iron and aluminum heads as well as benefits of hand and CNC  porting. You are also shown how to build a high-quality flow bench at  home so you can test your work and obtain professional results. Vizard  shows how to optimize flow paths through the heads, past the valves, and  into the combustion chamber. The book covers blending the bowls, a  basic porting procedure, and also covers pocket porting, porting the  intake runners, and many advanced procedures. These advanced procedures  include unshrouding valves, porting a shortside turn from the floor of  the port down toward the valve seat, and developing the ideal port area  and angle. All of these changes combine to produce optimal flow velocity  through the engine for maximum power.
    • By David Vizard
    • 160 pages
    • Paperback
    • Sold individually
  • Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    x
                
    •  2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    x
                
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • BluePrint Engines H8002S Small Block Chevy Aluminum Head
    BluePrint Engines H8002S Small Block Chevy Aluminum Head
    x
                
    • 195cc intake runners
    • 75cc exhaust runners
    • 2.02” and 1.60” stainless steel valves
    • Ultra street performance 1.437” springs for up to .575” lift
    • 115-125 lb seat pressure
    • 295-305 lb open pressure
    • 3⁄8”screw in studs and guideplates
    • Great for hydraulic roller or large flat tappet street cams
    • Straight plug
    • 64cc combustion chamber
    • 3-angle valve job
    • Manganese bronze guides
    • Same head as featured on our exclusive BluePrint 383 Roller
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -6 AN
    x
                Please view the product's page for more information
            
  • Dart 127111 SHP 180CC Bare Engine Cylinder Head, Straight, S/B Chevy
    Dart 127111 SHP 180CC Bare Engine Cylinder Head, Straight, S/B Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Machined for 1.250 or 1.437 diameter valve springs
    • Straight spark plug configuration
    180cc Intake port, 64cc combustion Chamber, 2.02/1.60 valve job.  These heads are bare.
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    x
                The SHP is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • All cylinder heads sold individually
    • Configuration: Bare
    • Combustion Chamber Volume: 64cc
    • Intake Port Volume: 180cc
    • Intake & Exhaust Valves: 2.02/1.60 Valve Job
    • Valve Springs: None
    • Spark Plugs: Straight Plugs
  • Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.437 diameter valve springs
    • Straight spark plug configuration
    Complete head 200cc intake runner 64CC combustion chamber
    2.02/1.60 valves hydraulic roller springs 1.437 diameter
  • Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.250 diameter valve springs
    • Straight spark plug configuration
    180cc intake runner, 64cc combustion chamber, 2.02/1.60 valves, 1.250 diameter springs for flat tappet camshafts.
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Nickel, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Nickel, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End FItting, 90 Degree Angle, Nickel, -8 AN
    Speedway Full Flow Swivel Hose End FItting, 90 Degree Angle, Nickel, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Black, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Black, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN female to push-on adapter
    • 45 degree angle fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Black, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree Angle, Black, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    x
                

    Based on the proven Performer RPM Vortec, this single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The unique Air-Gap design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range.

    An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover.

    • Accepts 1976 and later alternator and air-conditioning brackets
    • For square-bore carbs
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Will not fit under stock Corvette hood

    Edelbrock Intake Manifold Installation Instructions (PDF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Nickel, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Nickel, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN female to push-on adapter
    • 90 degree angle fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Nickel, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Nickel, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN female to push-on adapter
    • 45 degree angle fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black Anodized, -8 AN
    x
                Please view the product's page for more information
            
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -12 AN
    x
                Please view the product's page for more information
            
  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Red/Blue, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

Goto Previous PagePrevious Page
1 2