Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"air ride systems" Page 1 of 3

  • RideTech 30334000 Air Ride Suspension Digital Compressor System
    RideTech 30334000 Air Ride Suspension Digital Compressor System
    x
                Finish your air spring suspension with the RidePro e2 Compressor Control System from Air Ride Technologies. High tech electronic control allows the user to program three automatic height presets. This system uses air pressure sensors to control ride height presets. Digitally controlled solenoids with three presets allows you to have, for example, an over the road setting, a fairgrounds cruise setting and a parked setting.

    RidePro e2 Systems feature:

    • 3 gallon tank
    • 4-way RidePro e2 compressor
    • 4-way RidePro solenoids
    • RidePro e controller
    • Wiring harness, airlines and fittings
    • Rise Time: 3-5 seconds
    • Controls all four air springs independently
  • RideTech 30142000 Air Ride Compressor RidePro 2-Way, 4-Wheel System
    RideTech 30142000 Air Ride Compressor RidePro 2-Way, 4-Wheel System
    x
                

    Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

    With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

    • Tank
    • Independent front/rear control
    • Electronic soleniods

    All Compressor Systems include:

    • Air tank
    • Compressor
    • Control panel
    • Air line and fittings
  • RideTech 30121000 Standard Air Ride Suspension 2 Wheel Compressor Kit
    RideTech 30121000 Standard Air Ride Suspension 2 Wheel Compressor Kit
    x
                

    Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

    With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

    • Tank: 7" x 12" long, 1 gallon capacity
    • Compressor: 6" x 5" tall, 150 psi

    All Compressor Systems include:

    • Air tank
    • Compressor
    • Control panel
    • Air line and fittings
  • RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor Kit
    RideTech 30141001 Standard Air Ride Suspension 4 Wheel Compressor Kit
    x
                

    Finish your air spring suspension with a complete compressor system from AirRide Technologies. Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. 

    With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc. These manual-controlled systems are the right choice for bare bones installs and folks looking to for the most inexpensive way to run air suspension system.

    • Tank: 21" wide, circumference of 19 3/4", contains mounting centers which are 13" apart and 2 gallon capacity
    • Dual paddle control (front/rear)
    • 60' air line with fittings
    • Rise time: 12-15 seconds

    All Compressor Systems include:

    • Air tank
    • Compressor
    • Control panel
    • Air line and fittings
  • RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor System
    RideTech 30154000 Air Ride Suspension RidePro 4-Wheel Compressor System
    x
                

    Air Ride Technologies' classic, standard, non-electronic RidePRO systems use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control. Manual controls provide the ability to inflate or deflate system. With the exception of our ShockWave kits, our air ride conversion kits DO NOT include a compressor, controls, etc.

    Kit includes: 

    • Tank
    • Compressor
    • Control panel
    • Electronic solenoids mount anywhere
    • 4-way independent manual control system with RidePro electric valves

    Tank Dimensions (GIF)

  • Mustang II Front Air Ride Suspension Kit
    Mustang II Front Air Ride Suspension Kit
    x
                This kit fits 1974-78 Mustang II style front suspension with stock style lower control arms. Allows you to convert your stock control arm Mustang II front suspension to the popular Air Ride systems. Includes two air springs, two shocks and required brackets and hardware. Upper shock mount requires welding.
            
  • Mustang II Tubular Lower Arms for Air Ride/Wilwood Brakes, No Strut Rod
    Mustang II Tubular Lower Arms for Air Ride/Wilwood Brakes, No Strut Rod
    x
                Please view the product's page for more information
            
  • Mustang II Tubular Lower Arms for Air Ride/Wilwood, No Strut, 5/8 Inch Short
    Mustang II Tubular Lower Arms for Air Ride/Wilwood, No Strut, 5/8 Inch Short
    x
                Please view the product's page for more information
            
  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Lokar BAG-6142 68-72 Nova Billet Aluminum Throttle Pedal Assembly
    Lokar BAG-6142 68-72 Nova Billet Aluminum Throttle Pedal Assembly
    x
                

    Direct replacement throttle pedal assemblies for 1962-1972 Chevy II/Nova with rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location, and utilize a modern Lokar throttle cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5". Available in a brushed finish.

    • Direct replacement to eliminate the factory rod linkage
    • Mount in the original firewall location
    • Utilize a modern Lokar throttle cable system
    • Splined arms for fine adjustment
    • Arms can be mounted on right or left side of throttle pad
    • Spring-loaded pad measures 2" x 5"
    • Rubber inserts
    • Brushed finish

    Tech Note:
    Lokar's 1968-1972 Nova throttle pedal is designed to replace rod style throttle linkage only. Part Nos. BAG-6142 and XBAG-6142. To complete the installation use Lokar's throttle cables and mounting brackets.

  • Dynatech SuperMaxx 2007-10 Chevy 2500HD 6.0L Intermediate Exhaust Tubes w/Cats
    Dynatech SuperMaxx 2007-10 Chevy 2500HD 6.0L Intermediate Exhaust Tubes w/Cats
    x
                Please view the product's page for more information
            
  • Dynatech SuperMaxx 2007-10 Chevy 2500HD 6.0L Intermediate Tubes w/o Cats
    Dynatech SuperMaxx 2007-10 Chevy 2500HD 6.0L Intermediate Tubes w/o Cats
    x
                Please view the product's page for more information
            
  • Dynatech SuperMaxx 2007-10 Chevy 1500 Intermediate Exhaust Tubes w/o Cats
    Dynatech SuperMaxx 2007-10 Chevy 1500 Intermediate Exhaust Tubes w/o Cats
    x
                Please view the product's page for more information
            
  • Optima Batteries 34/78-1050 Std Group 34/78 Red Top Battery, 1000 CA
    Optima Batteries 34/78-1050 Std Group 34/78 Red Top Battery, 1000 CA
    x
                

    Discover the revolutionary new technology that has changed the way the world looks at batteries: Optima's famous Spiralcell Technology. These batteries last 2-3 times longer than other batteries and are 100% maitenance free. Plus, with the unique sealed design, you can mount them in any position.

    • Strongest 5 second starting burst
    • Up to 2x longer life
    • More than 15x the vibration resistance
    • Completely spill-proof, mountable in many positions
    • Maintenance free
    • Faster recharging capabilities
    • Optimal starting power, regardless of temperature

    4 post design - two on top and two on the side. Posts are 1-1/8" tall.

    Optima Spec Sheet (PDF)

    NOTE: For circle track / off road applications, we recommend the Optima Deep Cycle battery (Yellow Top).

  • SuperMaxx Long Tube Headers & Int. Pipe W/ Cats, '06 2WD-4WD Dodge Ram 5.7L
    SuperMaxx Long Tube Headers & Int. Pipe W/ Cats, '06 2WD-4WD Dodge Ram 5.7L
    x
                

    Gain up to 17 HP and 15 Ft. Lbs. over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Dodge Ram 1500 5.7L HEMI maximum performance both on and off road. These full length headers are designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • Primary Tube Size: 1-3/4"
    • Collector Size: 2-1/2"
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back
    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • True bolt-in — no cutting or welding
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    For ceramic coating, add Dynatech® Ceramic Coating (part number 31179000100) to your cart. 

  • SuperMaxx 00-06 Hummer H2/ Chevy Truck/ SUV 6.0L Interm Tubes w/ Cats
    SuperMaxx 00-06 Hummer H2/ Chevy Truck/ SUV 6.0L Interm Tubes w/ Cats
    x
                

    Gain a 106% increase in flow over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Hummer H2/ Chevy truck/ SUV 6.0L Vortec maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    Instructions (PDF)

  • SuperMaxx 00-06 Hummer H2/ Chevy Truck/ SUV 6.0L Interm Tubes w/o Cats
    SuperMaxx 00-06 Hummer H2/ Chevy Truck/ SUV 6.0L Interm Tubes w/o Cats
    x
                

    Gain a 106% increase in flow over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Chevy 1500 truck/ SUV or Hummer H2 6.0L Vortec maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    Instructions (PDF)

  • Lokar BAG-6113 55-57 Chevy Throttle Pedal Assembly for Big Block Chevy
    Lokar BAG-6113 55-57 Chevy Throttle Pedal Assembly for Big Block Chevy
    x
                

    The Lokar 1955-1957 Chevy billet aluminum throttle assembly is designed to convert original rod linkage to Lokar's modern throttle cable system. It is designed to mount in original firewall location with offset bezel washers to align cable through firewall. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. The throttle pad is spring-loaded like OEM design and measures 2" x 5".

    • Converts original rod linkage to Lokar's modern throttle cable system
    • Mounts in original firewall location
    • Offset bezel washers align cable through firewall
    • Splined arms for fine adjustment
    • Arms can be mounted on right or left side of throttle pad
    • Spring-loaded pad
    • Pad measures 2" x 5"
    • 1" longer upper arm for Big Block applications

    4916113 Installation Instructions (PDF)

  • SuperMaxx 99-06 Chevy 1500 Truck/ SUV/ Hummer 4.8L/5.3L Interm Tubes w/ Cats
    SuperMaxx 99-06 Chevy 1500 Truck/ SUV/ Hummer 4.8L/5.3L Interm Tubes w/ Cats
    x
                

    Bolt-on an additional 17 HP** over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Chevy Silverado/GMC Sierra 1500 or Hummer H2 V8 maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    **Dyno tested using a factory cat-back/muffler in a 5.3L application. 

    4.8L & 5.3L Instructions (PDF)

    6.0L Instructions (PDF)

  • Klotz KL-606 Foam Air Filter Oil
    Klotz KL-606 Foam Air Filter Oil
    x
                

    Klotz Foam Air Filter Oil is for all street, off-road, and racing foam air filter applications. Foam Air Filter Oil is easy to apply and improves air flow. Super viscous formula forms an oil barrier to trap micron sized particles that would normally find their way through air filters. Will not gum up and dry out. Waterproof formula prevents clogging when wet.

    Klotz is the best filter oil to use with your Kinser Filter System.

    Can't ship air!

  • SuperMaxx 1999-06 Chevy/GMC 1500/ SUV 4.8L/5.3L Intermediate Tubes w/o Cats
    SuperMaxx 1999-06 Chevy/GMC 1500/ SUV 4.8L/5.3L Intermediate Tubes w/o Cats
    x
                

    Bolt-on an additional 17 HP** over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Chevy Silverado/GMC Sierra 1500 or Hummer H2 V8 maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    **Dyno tested using a factory cat-back/muffler in a 5.3L application. 

    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    4.8L & 5.3L Instructions (PDF)

    6.0L Instructions (PDF)

  • Optima Batteries 6V-1050 6-Volt Battery
    Optima Batteries 6V-1050 6-Volt Battery
    x
                

    Discover the revolutionary new technology that has changed the way the world looks at batteries: Optima's famous Spiralcell Technology. These batteries last 2-3 times longer than other batteries and are 100% maintenance free. Plus, with the unique sealed design, you can mount them in any position.

    • Strongest 5 second starting burst
    • Up to 2x longer life
    • More than 15x the vibration resistance
    • Completely spill-proof, mountable in many positions
    • Maintenance free
    • Faster recharging capabilities
    • Optimal starting power, regardless of temperature
  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Dynatech   SuperMaxx 2004-06 Pontiac GTO Long Tube Headers Only
    Dynatech SuperMaxx 2004-06 Pontiac GTO Long Tube Headers Only
    x
                

    Gain up to 31 HP and 23.3 Ft. Lbs. over the **factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. These full length headers are designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    For ceramic coating, add Dynatech® Ceramic Coating part number 31179000100.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    **Versus OEM exhaust with cam upgrade.

    '04 GTO Installation Instructions (PDF)

    '05-'06 GTO Installation Instructions (PDF)

  • SuperMaxx 2005-10 Corvette C6 / Z06 Long Tube Headers Only
    SuperMaxx 2005-10 Corvette C6 / Z06 Long Tube Headers Only
    x
                

    Gain up to 16 HP and 16 Ft. Lbs. over factory exhaust! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. These full length headers are designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    For ceramic coating, add Dynatech® Ceramic Coating part number 31179000100. 

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    NOTE: All Non-ZO6 Corvettes came standard w/ 2-1/2" exhaust.

    '05 - '10 C6/Z06 Installation Instructions (PDF)

  • QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

     

  • Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    x
                These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
    • 340 Stealth Fuel Pump
    • Supports up to:
      • 700 HP EFI Supercharged
      • 1000 HP Carbureted Supercharged
    • Black anodized hanger assembly
    • (3) ORB-06 Ports – Supply, Return, Vent
    • Fuel resistant baffle / basket (Includes: Foam and Bladder)
    • Universal high flow pre-pump filter
    • Modular design can be cut to height to fit almost any fuel tank
    • EFI or Carbureted
    • Turbine pump mechanism increases durability.
    • Must be used with a return style system
    • In-tank use only

    Fuel Injected Systems Specs and Recommendations Chart (Link)

    Carbureted Systems Specs and Recommendations Chart (Link)

  • Simpson Shark Air SA10 Racing Helmet
    From: $799.99
    Simpson Shark Air SA10 Racing Helmet
    x
                
    • Snell SA 2010 Rated, manufactured in the USA (Code 470 & 471)
    • Best for muti-use, stock car, drag racing, sprint car, karting
    • Defined "Wave Eliminators" increase functionality from an aerodynamics aspect
    • Newly designed shield pivot system
    • Newly designed shield latch opens with ease
    • Recessed eye port offers a 100% shield seal
    • Head and neck restraint compatible
    • Ships complete with two 3mm shields (clear and smoke), includes helmet bag
    • JR helmet does not have lower lip
    • As worn by: Ashley Force Hood and Brandon Bernstein
    • Be sure to check out the Color Chart below to see the different color options available

    Simpson Sizing Chart (GIF)

    Helmet Color Chart  

  • Road Demon 190003 4 Barrel Carburetor Rebuild Kit
    Road Demon 190003 4 Barrel Carburetor Rebuild Kit
    x
                

    When it's time to rebuild your Road Demon 4 barrel carburetor, be sure to use a genuine Demon Fuel Systems carburetor rebuild kit. These rebuild kits include every possible gasket and seal you'll need along with many parts not included in other kits like detailed instructions and a power valve. Each kit covers virtually every carburetor in the listed "family". Available with red non–stick gaskets or reusable Buna gaskets for the fuel bowl, metering block, and bowl screws.

    For Road Demon vacuum secondary carburetors.

    910-12045 Instructions (PDF) 

  • Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    New
    Vintage Air 981412 Gen II Compac Universal Heat and Air Kit
    x
                Trust your heating and cooling needs to Vintage Air!  These universal heater/air conditioning kits are perfect for upgrading the outdated system in your classic ride or just adding a comfort necessity that was once not an option for your automobile.  Regardless of the reason, these redesigned kits are sure to satisfy your needs, with all necessary components and detailed instructions included.  Made in the USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions

    Note:  The Gen II Compac Kit is sold without an A/C condenser. 

  • Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
    New
    Vintage Air Gen II Universal Heat and Air Kit with Vertical Condenser
    x
                Trust your heating and cooling needs to Vintage Air!  These universal  heater/air conditioning kits are perfect for upgrading the outdated  system in your classic ride or just adding a comfort necessity that was  once not an option for your automobile.  Regardless of the reason, these  redesigned kits are sure to satisfy your needs, with all necessary  components and detailed instructions included.  Made in the USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Vertical A/C condenser (for early styled cars)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions
  • Vintage Air Gen II Universal Heat and Air Kit with Horizontal Condenser
    New
    Vintage Air Gen II Universal Heat and Air Kit with Horizontal Condenser
    x
                Trust your heating and cooling needs to Vintage Air!  These universal   heater/air conditioning kits are perfect for upgrading the outdated   system in your classic ride or just adding a comfort necessity that was   once not an option for your automobile.  Regardless of the reason,  these  redesigned kits are sure to satisfy your needs, with all  necessary  components and detailed instructions included.  Made in the  USA.

    Includes:

    • Evaporator
    • Controller         
    • 2-Louvers   
    • Compressor  (No compressor bracket)
    • Horizontal A/C condenser (for later styled cars)
    • Hose Kit w/drier
    • Safety switch
    • Detailed instructions
  • QA1 1970-81 Camaro/Firebird Front Coilovers
    QA1 1970-81 Camaro/Firebird Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • QA1 1974-77 GM A/G/X Front Coilovers
    QA1 1974-77 GM A/G/X Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • SuperMaxx 2007-10 Chevy/GMC 1500 Truck and SUV Intermediate Tubes w/ Cats
    SuperMaxx 2007-10 Chevy/GMC 1500 Truck and SUV Intermediate Tubes w/ Cats
    x
                

    Gain a 106% increase in flow over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Chevy Silverado/GMC Sierra 1500 V8 maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • True bolt-in — no cutting or welding
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back

    2007-2008 GMC Headers Installation Instructions (PDF)

  • Optima Batteries 75/25-925 Standard Red Top Battery, 910 CA
    Optima Batteries 75/25-925 Standard Red Top Battery, 910 CA
    x
                

    Discover the revolutionary new technology that has changed the way the world looks at batteries: Optima's famous Spiralcell Technology. These batteries last 2-3 times longer than other batteries and are 100% maintenance free. Plus, with the unique sealed design, you can mount them in any position.

    • 4 post design - two on top and two on the side
    • Strongest 5 second starting burst
    • Up to 2x longer life
    • More than 15x the vibration resistance
    • Completely spill-proof, mountable in many positions
    • Maintenance free
    • Faster recharging capabilities
    • Optimal starting power, regardless of temperature

    NOTE: For circle track / off road applications, we recommend the Optima Deep Cycle battery (Yellow Top).

    Optima Spec Sheet (PDF)

  • Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    x
                

    This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
    • Can support up to 600 hp at 40 psi
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
  • Dynatech SuperMaxx 2012 Mustang Boss 302 Intermediate Exhaust Tubes w/o Cats
    Dynatech SuperMaxx 2012 Mustang Boss 302 Intermediate Exhaust Tubes w/o Cats
    x
                Please view the product's page for more information
            
  • Dynatech   722-62220 SuperMaxx 2004-08 4WD Intermediate Tubes w/ Cats
    Dynatech 722-62220 SuperMaxx 2004-08 4WD Intermediate Tubes w/ Cats
    x
                

    Gain 14 HP and 9 Ft. Lbs. over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Ford F-150 5.4L Triton V8 maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • Collector Size: 2-1/2"
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back
    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • True bolt-in — no cutting or welding
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    Instructions (PDF)

  • Dynatech   722-62320 SuperMaxx 2004-08 2WD Intermediate Tubes w/ Cats
    Dynatech 722-62320 SuperMaxx 2004-08 2WD Intermediate Tubes w/ Cats
    x
                

    Gain 14 HP and 9 Ft. Lbs. over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your Ford F-150 5.4L Triton V8 maximum performance both on and off road. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • Collector Size: 2-1/2"
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back
    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • True bolt-in — no cutting or welding
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3