Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"aftermarket dash panels" Page 1 of 1

  • 1933-1934 Ford Dash Panel-Auto Meter Gauges
    1933-1934 Ford Dash Panel-Auto Meter Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with AutoMeter gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    • The inside of the Speedo hole is 3.178" and the outer lip is 3.325"
    • Accessory gauge holes have an inside of 2.070" and an outer lip of 2.250"
    • The light holes in this panel are .165" with an outer lip of .250"

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1932 Ford Dash Panel
    $129.99
    Product Rating: 5.00 Stars
    1932 Ford Dash Panel
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. AutoMeter gauges. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. 

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1932 Ford Stewart Warner Dash Panels
    1932 Ford Stewart Warner Dash Panels
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

  • 1933-1934 Ford Dash Panel, Stewart Warner Gauges
    1933-1934 Ford Dash Panel, Stewart Warner Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with Stewart Warner gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Designed for a 3-3/8" O.D. speedometer and 2-1/16" O.D. auxillary Stewart Warner gauges. 

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore.These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included - it's a painless process. For 12 Volt upgrades.

  • Classic Instruments BE01T 1955-56 Chevy Bel Era Series Gauge Set, Tan
    Classic Instruments BE01T 1955-56 Chevy Bel Era Series Gauge Set, Tan
    x
                Please view the product's page for more information
            
  • Classic Instruments BE01G 1955-56 Chevy Bel Era Series Gauge Set, Grey
    Classic Instruments BE01G 1955-56 Chevy Bel Era Series Gauge Set, Grey
    x
                Please view the product's page for more information
            
  • Classic Instruments BE01WW 55-56 Chevy Bel Era Series White Gauge Set
    Classic Instruments BE01WW 55-56 Chevy Bel Era Series White Gauge Set
    x
                Please view the product's page for more information
            
  • Classic Instruments BE01BB 55-56 Chevy Bel Era Series Black Gauge Set
    Classic Instruments BE01BB 55-56 Chevy Bel Era Series Black Gauge Set
    x
                Please view the product's page for more information
            
  • Painless 20102 1969-1974 GM Muscle Car 25 Circuit Wiring Harness
    Painless 20102 1969-1974 GM Muscle Car 25 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless Wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Instructions included.

    This 25 circuit harness was designed to fit the following 1969-1974 GM muscle cars: Camaro/Firebird, Nova, El Camino, Monte Carlo, Apollo, Chevelle, Cutlass, Skylark, Tempest, and GTO. This harness features a pre-wired factory style bulkhead connector that plugs directly into the back of the fuse block in the factory location. Factory original quick connect terminals are included for the in dash printed circuit board.  Pre-terminated plugs for a column mounted ignition switch, dimmer switch, headlights & headlight switch, blower motor, wiper motor, and turn signal switch. Included with this harness you'll also find a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.

    1969-1974 GM Muscle Car Wiring Instructions (PDF)

  • Painless 20101 1967-1968 Camaro/Firebird 24 Circuit Wiring Harness
    Painless 20101 1967-1968 Camaro/Firebird 24 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless Wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Instructions included.

    This 24 circuit harness is designed for the 1967 and 1968 Camaro & Firebird. It uses a '69 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modification required. Factory original quick connect terminals are included for the in dash printed circuit board.  Pre-terminated plugs for a column mounted ignition switch, dimmer switch, headlights & headlight switch, blower motor, wiper motor, and turn signal switch. Included with this harness you'll also find a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. 

    1967-1968 Camaro/Firebird Wiring Instructions (PDF)

  • American Autowire 510063 1961-64 Chevy Impala OEM Style Wiring Harness
    American Autowire 510063 1961-64 Chevy Impala OEM Style Wiring Harness
    x
                So you finally found that perfect Impala project and the mice decided to make a nest out of the wiring. This harness will replace the original plus it uses a modern fuse panel and also includes the plugs for a newer GM style or your '61-'64 column. The dash harness will hook to your stock gauges but you can also unplug it and use aftermarket gauges. It will allow you to rewire your car the way you want without the pain. 
            
  • Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    x
                The Classic Instruments 53-55 Ford F-100 package  features a dual layer design encompassing a speedometer, tachometer,  fuel, oil, temp, and volts gauges. This truck package will replace the  original instruments in your truck. For an easy installation, this  cluster is back-loaded and fastened with four bolts and one clamp. This  package is LED lit and includes turn signals as well as a blue “halo”  high beam indicator at the top of the speedometer. With a brushed finish  on the billet aluminum bezel, this package will put the finishing touch  on your custom vehicle. 
    • For '53-'55 Ford F100 truck
    • Package includes 6 gauge set pre-assembled in machined aluminum bezel, with glass, pre wired , Led lit,
    • Turn signal and high beam indicators included
    • Standard Ford sender pack included
  • Classic Instruments MU67VSW Dash Assembly Gauge Set, 1967-68 Mustang
    Classic Instruments MU67VSW Dash Assembly Gauge Set, 1967-68 Mustang
    x
                Velocity Series White Gauge Package. Includes  reproduction housing and face panel.  Fully assembled and wired.   Spectacular white gauge faces and black housing face. Bolts right into  the stock dash of a 1967 or 1968 Ford Mustang.
    • White "Velocity" face design
    • All gauges are pre-mounted into a new OEM type Instrument Housing aftermarket (1967)
    • All gauge packages are complete with a wiring harness that includes GXL18 color coded wires and connectors
    • Gauges included are a 5" 140 MPH Speedometer, 5" 8,000 RPM Tachometer, 2 ¼" Temp, Fuel & Oil
    • Stainless steel bezels with real curved glass lenses
    • Standard Ford sender pack; Speedometer, temp, oil pressure are included in the package.
    • Fuel gauge is set up to operate with stock 75-10 ohm sender
    • Fuel sender not included
  • Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. This customizable 21 circuit harness can be used in almost any application where you want Ford color coded wires. This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation.

    Designed for 1966-1976 Ford muscle cars including Galaxie, LTD, Falcon, Fairlane, Mustang, Maverick, Torino, and Ranchero.

    NOTE: Will not work with Thunderbirds. 

    1966-1976 Ford Muscle Car Wiring Instructions (PDF)

  • Painless Wiring 20122 1969-1970 Mustang 22 Circuit Wiring Harness
    Painless Wiring 20122 1969-1970 Mustang 22 Circuit Wiring Harness
    x
                

    This 22 circuit direct fit 1969-1970 Mustang harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.

    1969-1970 Mustang Wiring Instructions (PDF)

  • Classic Instruments MU65HR00 Gauge Set, Hot Rod Face, 1965-66 Mustang
    Classic Instruments MU65HR00 Gauge Set, Hot Rod Face, 1965-66 Mustang
    x
                We are proud to announce the 1965 1966 Mustang  gauge package. Classic Industries has taken a Hot Rod series five gauge  set  (3-3/8" Speedometer, 2-1/8" Fuel 75-10 ohms range, Volts, Water  Temp, and Oil Pressure Gauges), and combined it with mounting brackets  for the gauges to fit into your Mustang housing. The mounting system is  easy to install and will fit with most aftermarket bezels. Each gauge  set comes with an easy to follow step-by-step instruction manual to wire  in all your gauges.  Gauges only!!!

    • Black "Hot Rod" face design
    • For 65-66 mustang
    • Set includes 5 pc gauge set for GT style dash, mounting bracketry,
    • Standard Ford sender pack included
    • Fuel level gauge pre-programmed 75-10 ohm to allow stock fuel tank sender to be used
    • No fuel tank sender included
    • Outer face bezel not included, must reuse original, or purchase reproduction
  • Garage Sale - Dash Panels for Aftermarket Gauges - '69 Camaro
    Garage Sale
    Garage Sale - Dash Panels for Aftermarket Gauges - '69 Camaro
    x
                

    Everyone wants their car to be a little different from the next guy. These molded black dash panels allow you to install two 3 3/8" and four 2 1/16" gauges of your choice in your car. We also have a gauge wiring harness for each application to make the installation a snap.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1932 Ford Stewart Warner Dash Panels
    Garage Sale
    Garage Sale - 1932 Ford Stewart Warner Dash Panels
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

     

    This is garage sale priced because it has some minor scratches and three LED's pre-installed.