Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"afco rear spring" Page 1 of 11

  • AFCO 40023 Strut Caster/Camber Plates, 1990-93 Mustang
    AFCO 40023 Strut Caster/Camber Plates, 1990-93 Mustang
    x
                

    AFCO Mustang Street/Strip coil-over struts incorporate race inspired valving for hard launches, consistent E.T.'s and improved reaction times. The struts completely replace stock units and can be used in the O.E. configuration. The optional coil-over kit & caster/camber plates will allow for ride height adjustment using a coil-over spring.

    • Caster/Camber plates are recommended when lowering the ride height
    • Complete kit allows for correct geometry at any ride height

    Strut package is the perfect complement to AFCO Tubular K-Members and Reactor Series or Eliminator rear shocks.

    Note: AFCO recommends a 10" 200 lb. spring for drag racing, or a 14" 125 lb. spring for other uses.

  • AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    x
                

    AFCO Mustang Street/Strip coil-over struts incorporate race inspired valving for hard launches, consistent E.T.'s and improved reaction times. The struts completely replace stock units and can be used in the O.E. configuration. The optional coil-over kit & caster/camber plates will allow for ride height adjustment using a coil-over spring.

    • Fixed valving promotes maximum weight transfer
    • BNC valving provides soft rebound dampening while controlling front end "bounce"
    • Coil-over conversion allows ride height adjustment
    • Caster/Camber plates are recommended when lowering the ride height
    • Complete kit allows for correct geometry at any ride height

    Strut package is the perfect complement to AFCO Tubular K-Members and Reactor Series or Eliminator rear shocks.

    Note: AFCO recommends a 10" 200 lb. spring for drag racing, or a 14" 125 lb. spring for other uses.

  • AFCO 1035 10 Series GM Street/Strip Rear Shock, Comp/Rebound: 3/5
    AFCO 1035 10 Series GM Street/Strip Rear Shock, Comp/Rebound: 3/5
    x
                

    AFCO has been in the racing shock business for over 20 years and has incorporated their technological knowledge into this K-Series street/strip shock. These 40/60 rear shocks allow the rear to squat which improves traction through weight transfer.

    These split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061035 is a split valve shock for rear applications.  Soft compression accents weight transfer.  In circle track applications, used on the left rear, this shock tends to tighten corner exit handling.  Used on the right rear, this shock tends to tighten corner entry handling.

    • Compressed Length: 13.00"
    • Extended Length: 21.00"

    Fits:

    • 1955-86 GM Full Midsize
    • 1963-86 Malibu, Chevelle, Monte Carlo, Cutlass and Rega
    • 1968-79 Nova
    • 1958-70 Impala
    • 1964-86 Chevell/Monte Carlo
  • AFCO 5 Inch x 16 Inch Rear Springs
    $59.99
    $68.99
    AFCO 5 Inch x 16 Inch Rear Springs
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems , and, in some cases, dangerous situations. When it comes to choosing coil springs, there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS. 

    All AFCOILS carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your rate. 

    • Every AFCO Coil Spring is machine-ground on both ends to tolerances within 1 degree, and then pressed to solid height and "pre-set." This process virtually eliminates any potential for additional set.
    • AFCO has made a science of optimizing the variables of material thickness and coil spacing to achieve the best possible design for each rate and height of spring in their product line.
    • AFCOILS incorporate the use of super-high tensile strength chrome silicon wire for long life and and a consistent rate. All springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to be able to withstand even the most abusive conditions.
    • To further enhance durability, AFCOILS are shot-peened and coated with a durable yellow finish.

     

  • AFCO 5 Inch x 13 Inch Rear Springs
    From: $54.99
    AFCO 5 Inch x 13 Inch Rear Springs
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems , and, in some cases, dangerous situations. When it comes to choosing coil springs, there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS. 

    All AFCOILS carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your rate. 

    • Every AFCO Coil Spring is machine-ground on both ends to tolerances within 1 degree, and then pressed to solid height and "pre-set." This process virtually eliminates any potential for additional set.
    • AFCO has made a science of optimizing the variables of material thickness and coil spacing to achieve the best possible design for each rate and height of spring in their product line.
    • AFCOILS incorporate the use of super-high tensile strength chrome silicon wire for long life and and a consistent rate. All springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to be able to withstand even the most abusive conditions.
    • To further enhance durability, AFCOILS are shot-peened and coated with a durable yellow finish.

     

  • AFCO 1493-5 14 Series Fixed Bearing Coilover Shock 9 In., Comp 3/Reb 5
    AFCO 1493-5 14 Series Fixed Bearing Coilover Shock 9 In., Comp 3/Reb 5
    x
                

    AFCO S-Series Fixed Bearing Shocks offer tremendous value by packaging race-proven design, proven value combinations, and durability in an economical, fixed bearing design that can be used with or without coilovers.

    AFCO fixed bearing shocks feature quality bearing ends that allow for free movement in applications where other mounts could be bound and reduce shock effectiveness.  The available standard valves, as well as split valves, allow for multiple tuning options with a simple shock swap.  When you're ready to win, we have the winning shock!

    • Sealed body
    • Twin-Tube design
    • Can be used with or without coilovers
    • Can be mounted upside-down for reduced unsprung weight
    • Compressed Length: 14.75"
    • Extended Length: 23.50"
    • Stroke: 9"

    Dirt Modified Swing Arm Twin Tube Shock Chart (Link)   

    Dirt Modified 4-Link Twin Tube Shock Chart (Link)  

    Pavement Street and Super Stock Shock Chart (Link)   

     

  • AFCO 5-1/2 x 12 Inch Street Stock Rear Springs, 1973-88 GM Passenger
    AFCO 5-1/2 x 12 Inch Street Stock Rear Springs, 1973-88 GM Passenger
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems , and, in some cases, dangerous situations. When it comes to choosing coil springs, there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS. 

    All AFCOILS carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your rate. 

    Fits 1973-1983 Chevelle/Malibu; 1973-1988 Monte Carlo, Cutlass, Regal, and Grand Prix.

    • Coil spring is machine-ground on both ends to tolerances within 1 degree and then pressed to solid height and "pre-set" to eliminate any potential for additional set
    • Optimized material thickness and coil spacing to achieve the best possible design for each rate and height of spring in the product line
    • Super-high tensile strength chrome silicon wire for long life and and a consistent rate
    • Springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to withstand the most abusive conditions
    • To enhance durability, AFCOILS are shot-peened and coated with a durable finish
  • AFCO 1034 10 Series Stock Shocks, Rear, Camaro/Firebird, Comp 3/Reb 5
    AFCO 1034 10 Series Stock Shocks, Rear, Camaro/Firebird, Comp 3/Reb 5
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061034 is a split valve shock for rear applications.  Soft compression accents weight transfer.  In circle track applications, used on the left rear, these shocks tend to tighten corner exit handling.  Used on the right rear, these shocks tend to tighten corner entry handling. 

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • 1970-81 Camaro/Firebird
    • Compressed Length: 14.50"
    • Extended Length: 22.50"
  • AFCO 2496-0D 24 Series Steel Gas L Rear Shock 9 In Stroke Comp 6/Reb 0
    AFCO 2496-0D 24 Series Steel Gas L Rear Shock 9 In Stroke Comp 6/Reb 0
    x
                

    Speedway Motors is proud to be the first to announce the release of AFCO's newly designed IMCA approved steel body gas shocks. These new shocks have all the sophistication of our deflective disc technology wrapped up in an economical & rule friendly, non-adjustable package. These are sure to be the answer for any racer under constraints to experience gas shocks. 

    The new Steel Body 24 Series Gas Shock uses a Floating Piston Design. They are rebuildable and serviceable through an authorized Afco shock rebuild center, and are available in straight or split valve codes. Coil-over and non coil-over compatible.

    The choice is clear, let the new AFCO Steel Mono-Tube Gas Shocks handle your car all the way to victory lane!

  • AFCO 1043 K Series Street/Strip Rear Shock, 79-83 Mustang, 55-57 Chevy
    AFCO 1043 K Series Street/Strip Rear Shock, 79-83 Mustang, 55-57 Chevy
    x
                

    Whatever your street stock choice, AFCO has the stock mount shock for you. These K-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules. AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Comp. Length: 13 " 
    • Ext. Length 21.5" 
    • Comp: 5
    • Rebound: 5
  • AFCO 3875R-1 Eliminator Rear Shock-7 Inch, Bearing Shaft, Chevrolet/GM
    AFCO 3875R-1 Eliminator Rear Shock-7 Inch, Bearing Shaft, Chevrolet/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • 106-3875R1
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  1/2" I.D. bearing (1.06")

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3875R-2 Eliminator Adj Rear Shock-7 Inch-Shaft Stud, Chevrolet/GM
    AFCO 3875R-2 Eliminator Adj Rear Shock-7 Inch-Shaft Stud, Chevrolet/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • 106-3875R2
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3875R Eliminator Rear Shocks-Single Adj. 7 In Stroke-Ford/Mercury
    AFCO 3875R Eliminator Rear Shocks-Single Adj. 7 In Stroke-Ford/Mercury
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  Tie Bar Mount w/ 2.375" bolt centers
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)

    See Applications tab for Ford-Mercury chassis fittment.

     

  • AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar
    AFCO 3895M Eliminator Rear Shocks, Single Adj - Mopar
    x
                AFCO Eliminator Twin Tube Adjustable REAR shocks are built  specifically for drag racing. Using advanced onboard diagnostics, AFCO developed  the Eliminator Series to precisely control your race car at every point on the  track. With the easy-to-use, repeatable "click" settings, this shock will give  you unsurpassed traction. 

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    See Applications tab for Chrysler/Dodge/Plymouth chassis fittment.

  • AFCO 3870R-1 Eliminator Double Adjustable Rear Shock, 7 Inch, Chevy/GM
    AFCO 3870R-1 Eliminator Double Adjustable Rear Shock, 7 Inch, Chevy/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • 106-3875R1
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  1/2" I.D. bearing (1.06")

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3870CR-2 1970-81 Camaro Pro Touring Double Adj. Rear Shock
    AFCO 3870CR-2 1970-81 Camaro Pro Touring Double Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1970-81 Chevy Camaro. Note: You may need to "slot" the tie bar mount.  

  • AFCO 3890M Eliminator Rear Shocks, Double Adj - Mopar
    AFCO 3890M Eliminator Rear Shocks, Double Adj - Mopar
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    See Applications tab for Chrysler/Dodge/Plymouth chassis fittment.

  • AFCO 3870R-2 Eliminator Adj. Rear Shock 7 In, Chevy/GM, 1970-81 Camaro
    AFCO 3870R-2 Eliminator Adj. Rear Shock 7 In, Chevy/GM, 1970-81 Camaro
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • 106-3875R2
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for fittment.

  • AFCO 3875CR-2 1970-81 Camaro Pro Touring Single Adj. Rear Shock
    AFCO 3875CR-2 1970-81 Camaro Pro Touring Single Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1970-81 Chevy Camaro. Note: You may need to "slot" the tie bar mount.  

  • AFCO 2494D 24 Series Steel Gas Shock, 9 Inch, Right Rear, Comp 4/Reb 4
    AFCO 2494D 24 Series Steel Gas Shock, 9 Inch, Right Rear, Comp 4/Reb 4
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • Compressed Length:  14.95"
    • Extended Length:  23.85"
    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Modified Swing Arm Gas Shock Chart (Link)

    Dirt Street and Super Stock Shock Chart (Link)  

  • AFCO 3870CR-1 Pro Touring Double Adjustable Rear Shock, Chevy / GM
    AFCO 3870CR-1 Pro Touring Double Adjustable Rear Shock, Chevy / GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Tri-Five Chevy. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

  • AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3870CR Pro Touring Double Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

  • AFCO 3895CM 1957-79 Dodge-Plymouth Pro Touring Single Adj. Rear Shock
    AFCO 3895CM 1957-79 Dodge-Plymouth Pro Touring Single Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 9" Stroke
    • 18"-20" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1957-1979 Chrysler-Dodge-Plymouth passenger cars - see Application tab.   

  • AFCO 3890CM 1957-79 Dodge-Plymouth Pro Touring Double Adj. Rear Shock
    AFCO 3890CM 1957-79 Dodge-Plymouth Pro Touring Double Adj. Rear Shock
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 9" Stroke
    • 18"-20" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Fits 1957-1979 Chrysler-Dodge-Plymouth passenger cars - see Application tab.   

  • AFCO 2495-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 5/Reb 3
    AFCO 2495-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 5/Reb 3
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Street and Super Stock Shock Chart (Link) 

  • AFCO 3875CR-1 Pro Touring Single Adjustable Rear Shock, Chevy / GM
    AFCO 3875CR-1 Pro Touring Single Adjustable Rear Shock, Chevy / GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for your Tri-Five Chevy. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

  • AFCO 2494-5D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 5
    AFCO 2494-5D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 5
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • Compressed Length:  14.95"
    • Extended Length:  23.85"
    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Modified Swing Arm Gas Shock Chart (Link) 

  • AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    AFCO 3875CR Pro Touring Single Adjustable Rear Shock, Ford/Mercury/GM
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

  • AFCO 2496-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 6/Reb 3
    AFCO 2496-3D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 6/Reb 3
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • Compressed Length:  14.95"
    • Extended Length:  23.85"
    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center

    Dirt Modified Swing Arm Gas Shock Chart (Link) 

  • AFCO 2498-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 8/Reb 2
    AFCO 2498-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 8/Reb 2
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2499-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 9/Reb 2
    AFCO 2499-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 9/Reb 2
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2499-1D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 9/Reb 1
    AFCO 2499-1D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 9/Reb 1
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2497-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 7/Reb 2
    AFCO 2497-2D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 7/Reb 2
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2494-0D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 0
    AFCO 2494-0D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 0
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2494-6D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 6
    AFCO 2494-6D 24 Series Steel Gas Shock-9 Inch, Left Rear, Comp 4/Reb 6
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 2493D 24 Series Steel Body Gas Shock-9 In-Left Rear, Comp 3/Reb 3
    AFCO 2493D 24 Series Steel Body Gas Shock-9 In-Left Rear, Comp 3/Reb 3
    x
                

    AFCO's sophisticated 24 Series steel body gas shocks feature deflective disc technology in an economical, rules-friendly, non-adjustable package. These mono-tube shocks are sure to be the answer for any racer under constraints to experience the superb handling of gas-charged shocks.

    • Compressed Length:  14.95"
    • Extended Length:  23.85"
    • IMCA Racing approved
    • Mono-tube steel body
    • Gas pressure floating piston design
    • Deflective disc technology
    • Performance at its best on fast or rough tracks
    • Grooved for coil-over applications
    • Street Stock/Super Stock applications (left rear)
    • Rebuildable and serviceable through an authorized AFCO shock rebuild center
  • AFCO 10032WRG 70-81 Camaro Rear Steel Stock Mount Shock-5 Valve-Medium
    AFCO 10032WRG 70-81 Camaro Rear Steel Stock Mount Shock-5 Valve-Medium
    x
                

    AFCO steel body stock mount shock for '70-'81 Camaro & Firebird. These shocks have been approved for use in their respective categories of DIRTcar Racing.  Simply find your classification and choose from the appropriate list of shocks. 

    NOTE: "A" Type cars can use only the shocks in the "A" type category. "B" Type cars can choose from shocks in the "B" category, as well as the "A" category. "C" Type category cars can choose any shock in all three categories.

  • AFCO 1033WRG 1970-81 Camaro Heavy Steel Rear Stock Mount Shock-6 Valve
    AFCO 1033WRG 1970-81 Camaro Heavy Steel Rear Stock Mount Shock-6 Valve
    x
                

    AFCO steel body stock mount shock for '70-'81 Camaro & Firebird. These shocks have been approved for use in their respective categories of DIRTcar Racing.  Simply find your classification and choose from the appropriate list of shocks. 

    NOTE: "A" Type cars can use only the shocks in the "A" type category. "B" Type cars can choose from shocks in the "B" category, as well as the "A" category. "C" Type category cars can choose any shock in all three categories.

  • AFCO 1034WRG 1970-1981 Camaro Rear Steel Stock Mount Shock, 3-5 Valve
    AFCO 1034WRG 1970-1981 Camaro Rear Steel Stock Mount Shock, 3-5 Valve
    x
                

    AFCO steel body stock mount shock for '70-'81 Camaro & Firebird. These shocks have been approved for use in their respective categories of DIRTcar Racing.  Simply find your classification and choose from the appropriate list of shocks. 

    NOTE: "A" Type cars can use only the shocks in the "A" type category. "B" Type cars can choose from shocks in the "B" category, as well as the "A" category. "C" Type category cars can choose any shock in all three categories.

  • AFCO 3870CF Pro Touring Double Adjustable Front Shock
    AFCO 3870CF Pro Touring Double Adjustable Front Shock
    x
                

    AFCO Pro Touring Shocks provide high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    Rear axle shocks for 1973 Chevy Nova w/ Non-H.D. Rear (mounting point modifications may be needed). Note: The parts are described as "front" shocks, but they are indeed intended for 1973 Nova "rear".    

    • 7" Stroke - 13.90" Comp - 20.90" Ext
    • 15.50"-18.50" Shock eye-to-eye Length @ Ride Height
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    For application information see Application tab.

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 11