Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"adjustable coil front shocks" Page 1 of 5

  • QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

     

  • AFCO 6875F Reactor 1993-02 Camaro Front Drag Shocks
    AFCO 6875F Reactor 1993-02 Camaro Front Drag Shocks
    x
                

    AFCO Single Adjustable Monotube FRONT shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Plus, with AFCO's exclusive "BNC" valving, these shocks eliminate bounce caused by the impact after a wheel stand.

    Fits 1993-2002 Chevy Camaro and Pontiac Firebird.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • BNC Valving eliminates front end bounce
    • Can be upgraded to a coil-over shock with included kit
    • 100% co-Tested and Serial Numbered

    Note: Coil-over kit is included with each shock. Coil spring NOT included.

  • AFCO 3875F Eliminator 1993-02 Camaro Front Shocks - Single Adj
    AFCO 3875F Eliminator 1993-02 Camaro Front Shocks - Single Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    Fits 1993-2002 GM F-Body (Chevy Camaro, Pontiac Firebird). Coil-over kit hardware is included.

  • AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    Fits 1993-2002 GM F-Body (Chevy Camaro, Pontiac Firebird). Coil-over kit hardware is included.

  • AFCO 3865M Mopar Eliminator Single Adjustable Front Shock, 6 In Stroke
    AFCO 3865M Mopar Eliminator Single Adjustable Front Shock, 6 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3855M Mopar Eliminator Single Adjustable Front Shock, 5 In Stroke
    AFCO 3855M Mopar Eliminator Single Adjustable Front Shock, 5 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • QA1 1970-81 Camaro/Firebird Front Coilovers
    QA1 1970-81 Camaro/Firebird Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • QA1 1974-77 GM A/G/X Front Coilovers
    QA1 1974-77 GM A/G/X Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • QA1 1967-74 GM Front Coil-Over Kit
    QA1 1967-74 GM Front Coil-Over Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs. 

    Choose 350 lb., 450lb. or 550 lb. rate springs.

    • Easy bolt-in installation
    • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in
    • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
    • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
    • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers
    Fits
    • 1967-69 Camaro/Firebird
    • 1968-74 Nova 
  • QA1 1968-72 Chevelle A-Body Front Coilover Kit
    QA1 1968-72 Chevelle A-Body Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • AFCO 3860M Mopar Eliminator Double Adjustable Front Shock, 6 In Stroke
    AFCO 3860M Mopar Eliminator Double Adjustable Front Shock, 6 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.  By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3850M Mopar Eliminator Double Adjustable Front Shock, 5 In Stroke
    AFCO 3850M Mopar Eliminator Double Adjustable Front Shock, 5 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.  By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 6855M Reactor 1962-67 Chevy II Front Drag Shock, 5 Inch Stroke
    AFCO 6855M Reactor 1962-67 Chevy II Front Drag Shock, 5 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube FRONT shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Plus, with AFCO's exclusive "BNC" valving, these shocks eliminate bounce caused by the impact after a wheel stand.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • BNC Valving eliminates front end bounce
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered
    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)

    Fits 1962-1967 Chevy II Nova. (May need to "slot" tie bar mount.)

  • AFCO 3850F Eliminator 1962-67 Chevy II Front Shocks, Double Adj
    AFCO 3850F Eliminator 1962-67 Chevy II Front Shocks, Double Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Fits 1962-1967 Chevy II/Nova (may need to "slot" tie bar mount). 

  • AFCO 6845F Reactor Front Drag Shocks - Chevrolet/GM/Dodge
    AFCO 6845F Reactor Front Drag Shocks - Chevrolet/GM/Dodge
    x
                

    AFCO Single Adjustable Monotube FRONT shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Plus, with AFCO's exclusive "BNC" valving, these shocks eliminate bounce caused by the impact after a wheel stand.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • BNC Valving eliminates front end bounce
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered

    Fits most '55-'96 GM chassis

    Fits 1979-1992 Dodge Ram half-ton 2WD pickup trucks.

    See Applications tab for fittment.

  • AFCO 6865M Reactor Mopar Front Drag Shock, 6 Inch Stroke
    AFCO 6865M Reactor Mopar Front Drag Shock, 6 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube FRONT shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Plus, with AFCO's exclusive "BNC" valving, these shocks eliminate bounce caused by the impact after a wheel stand.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • BNC Valving eliminates front end bounce
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered

    106-6865M

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)

    See Applications tab for Dodge-Plymouth chassis fittment.

  • Billy's Big Bike, Black
    $74.99
    Product Rating: 5.00 Stars
    Billy's Big Bike, Black
    x
                

    This handy little bike is great for use around the pits, shop, school, or work! Extreme fun for all ages! Unlike others, this mini bike has the mandated chain guard and includes a folding kickstand. 300 lb. maximum capacity. 

    It features padded handle grips and seat as well as safety reflectors on the front and back of seat and pedals. There is a telescopic front fork and adjustable coil-over rear suspension. A coaster brake and 6" tires and chrome wheels complete this awesome bike. It measures less than 25" long and weighs just 18 lbs. The seat is adjustable from 18" to 24" and the handle bars adjust from 20" to 25".

    • Mandated chain guard and includes a folding kickstand
    • 300 lb. maximum capacity
    • Measures less than 25" long and weighs just 18 lbs
    • Adjustable from 18" to 24" and the handle bars adjust from 20" to 25"
    • Gloss Black
  • AFCO 3845F Eliminator Front Shocks, Single Adj - Chevy/GM/Dodge Truck
    AFCO 3845F Eliminator Front Shocks, Single Adj - Chevy/GM/Dodge Truck
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Fits most '55-'96 GM chassis

    Fits most '79-92 Dodge Trucks 

    See Application tab for fittment.

     

  • AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D
    Fits 1979-1992 Dodge Ram half-ton pickup trucks

    Fits most '55-'96 GM chassis

    See Application tab for fittment.

  • AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3870FBNC
      • Body Mount: Tie Bar Mount w/ 2.625" bolt centers
      • Shaft Mount: 1/2" I.D. Bearing (1.06" wide)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D (sold separately, except 106-3870FBNC).

  • Garage Sale - QA1 Adjustable Front Pro-Coil Shock Conversion Kit
    Garage Sale
    Garage Sale - QA1 Adjustable Front Pro-Coil Shock Conversion Kit
    x
                Please view the product's page for more information
            
  • AFCO 3860F/BNC Eliminator BNC Front Shock, Mopar B & E Body
    AFCO 3860F/BNC Eliminator BNC Front Shock, Mopar B & E Body
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3860FBNC
      • Body Mount: 1/2" I.D. Bearing (1.06" wide)
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • AFCO 3850F/BNC Eliminator BNC Front Shock, Mopar & Chevy II
    AFCO 3850F/BNC Eliminator BNC Front Shock, Mopar & Chevy II
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3850FBNC
      • Body Mount: 1/2" I.D. Bearing (1.06" wide)
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • AFCO 3840F/BNC Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    AFCO 3840F/BNC Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3840FBNC
      • Body Mount: Tie Bar Mount w/ 2.375" bolt centers
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 4 Stroke, 10.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 4 Stroke, 10.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)  Rear Coil-Over Mounting Guide (GIF)

     

  • Afco 3840FBNCBG Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    New
    Afco 3840FBNCBG Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    x
                Please view the product's page for more information
            
  • AFCO 3770 Series Twin-Tube Double Adjust. Shock-7 Inch, Standard Front
    AFCO 3770 Series Twin-Tube Double Adjust. Shock-7 Inch, Standard Front
    x
                

    AFCO's T2 Twin-Tube Adjustable shock has many of the ground breaking features of the proven M2 series to provide unmatched control and adjustability from a twin-tube package.

    • Stroke: 7"
    • Compressed Length: 13.90"
    • Extended Length: 20.90"
    • Double Adjustable
    • For dirt late models
    • Each shock includes a coilover kit, tuning guide and dyno sheet.
    • Completely new design (adapted from the M2 shock)
    • Provides precise control on valving changes at all shaft speeds
    • Low speed sensitivity to valve changes substantially enhanced (where the shock controls the car's weight transfer forces)
    • Keeps the car planted!

    Late Model 4-Link Twin Tube Shock Chart (Link) 

  • AFCO 6875R-1 6875R-1 Reactor Rear Drag Shock, Chevy/GM, 7 Inch Stroke
    AFCO 6875R-1 6875R-1 Reactor Rear Drag Shock, Chevy/GM, 7 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube REAR shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  Tie Bar with 2.375" bolt centers
    • Shaft Mount:  1/2" I.D. bearing (1.06")
    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered
    1. The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.
    2. Can be used as a coil-over shock with 106-20135D coil-over hardware kit (purchase separate).

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 6875R-2 6875R-2 Reactor Rear Drag Shock, Chevy/GM, 7 Inch Stroke
    AFCO 6875R-2 6875R-2 Reactor Rear Drag Shock, Chevy/GM, 7 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube REAR shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  Tie Bar with 2.375" bolt centers
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered
    1. The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.
    2. Can be used as a coil-over shock with 106-20135D coil-over hardware kit (purchase separate).

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 3 Stroke, 9.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 3 Stroke, 9.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)     Rear Coil-Over Mounting Guide (GIF)

     

  • Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original Tri-Five Chevy frame.

    Sold as a PAIR.

  • AFCO 3865CM Dodge/Plymouth Pro Single Adj. Front Shock, A/B/E Body
    AFCO 3865CM Dodge/Plymouth Pro Single Adj. Front Shock, A/B/E Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO 3855CM Dodge/Plymouth Pro Single Adj Front Shock, A/B/C Body
    AFCO 3855CM Dodge/Plymouth Pro Single Adj Front Shock, A/B/C Body
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Can be converted to coil-over with kit
    • Factory Dyno Tested for performance
    • Made in the USA

    See Application tab for chassis fittment. 

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 7 Stroke, 13.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 7 Stroke, 13.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)  Rear Coil-Over Mounting Guide (GIF)

     

  • Garage Sale - Afco Reactor 1962-67 Chevy II Front Drag Shock, 5 Inch Stroke
    Garage Sale
    Garage Sale - Afco Reactor 1962-67 Chevy II Front Drag Shock, 5 Inch Stroke
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Reactor Front Drag Shocks - Chevrolet/GM
    Garage Sale
    Garage Sale - AFCO Reactor Front Drag Shocks - Chevrolet/GM
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5