Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Brand Banners -  KSE Racing
Searched For:

"KSE" Page 1 of 2

  • Moose Blocks 2020 Billet Impeller for KSE Water Pumps
    Moose Blocks 2020 Billet Impeller for KSE Water Pumps
    x
                Here's one of the secrets the "big time" engine builders are using to keep their engines alive.   

    This high flow replacement impeller for the KSE pump cures the cavitation problem common through the midrange power band. An easy fix for the KSE pump.

  • KSE Racing Products KSM1086 KSE Elixer Power Steering Fluid
    KSE Racing Products KSM1086 KSE Elixer Power Steering Fluid
    x
                

     

    With the frequency and pressure of racing power assist being twice that of stock power systems, it’s obvious that stock power steering fluid is not adequate. Would you use 10W30 motor oil in a racing engine? Of course not! That is why KSE has developed a power steering fluid designed to handle the stresses of racing power steering.


    The Elixer has a higher viscosity index, anti-foaming, anti-wear, and anti-oxidation capabilities to handle the racing power steering stresses. The Elixer will minimize power assist fade, low-corner- speed assist loss, and decrease heat generation. We also have made the color a “cool” blue to help in identifying oil leak origins.


    The Elixer completes the total racing power steering system. When it comes to steering, go with a name you can trust...KSE!

     

  • KSE Racing Products KSC1077Seal Kit for KSE Direct Drive TandemX Pump
    KSE Racing Products KSC1077Seal Kit for KSE Direct Drive TandemX Pump
    x
                Seal Kit for KSE Direct Drive TandemX Pump

    910-32936 Information sheet (PDF)

  • KSE KSC1052 Tandem Pump Rebuild Kit, Serial Number 5266 & Older
    KSE KSC1052 Tandem Pump Rebuild Kit, Serial Number 5266 & Older
    x
                

    Rebuild kit for KSE Direct Drive Tandem Power Steering Pumps # 910-32910 with a serial number of 5266 or lower, "older model."

  • KSE Racing Products KSG1070 Black Series Notched Steering Gear Mount
    KSE Racing Products KSG1070 Black Series Notched Steering Gear Mount
    x
                
    • Sleek, black anodized finish
    • Works with KSE Gen2 power steering gear
  • Right Hand Drive Kit for KSE Tandem Pump
    Right Hand Drive Kit for KSE Tandem Pump
    x
                

    Passenger side (RH) drive kit for KSE Tandem Power Steering & Fuel pumps. Pump mounts off water pump on S/B Chevy. Kit includes the mount bracket, two pulleys, and an HTD belt.

    • 37-tooth pulley
    • 28-tooth pulley
    • 720mm (28.3") HTD belt 
    913-15926 Instructions (pdf)
  • KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    x
                

    The all new KSE TandemX Pump is based upon the design of its popular predecessor and is a highly developed “two-in-one” high performance power steering & fuel pump. This pump has been designed to help simplify the racer’s engine setup and plumbing while providing the utmost in performance and durability. The TandemX Pump utilizes a single shaft drive to operate both the power steering and fuel pumps or reduced mechanical efficiency losses. The TandemX Pump is compact and is designed to fit almost any racing application with a variety of sizes and mounting configurations.

    • Mount on Back of Dry Sump Pump (CCW Rotation)
    • Cam Drive Pump Off Back of Engine
    • 3/8” Male Hex Drive
  • KSE Racing Products KSD1023 Front Cam Mount Dry Sump Drive-1/2 In. Hex
    KSE Racing Products KSD1023 Front Cam Mount Dry Sump Drive-1/2 In. Hex
    x
                

    KSE cam mount 1/2" hex dry sump drive.

  • KSE Racing Products KSF2000-010 Vertical Reservoir Tank with Filter
    KSE Racing Products KSF2000-010 Vertical Reservoir Tank with Filter
    x
                KSE vertical power steering reservoir tanks are a lightweight aluminum design. Features an internal filter, vented cap and AN 6 inlet/AN 10 outlet. Mount with bracket at right.  
    • Adequate fluid dwell time for cooling and de-aration under all racing conditions
    • Improved cooling
    • Minimizes pump starvation (cavitation) under hard cornering conditions
    • Internal Filter
    • Vented Cap
    • Optimim inlet/outlet size and locations
    • Overall Height:  7-3/4"
    • Diameter:  3-1/2"
  • KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    x
                

    The KSE HPD power steering pump is 1.4 lb. lighter and 25% more efficient than the previous design. Large AN 10 inlet eliminates cavitation up to 10,000 engine RPM. Requires AN 10 supply line.

    • Mounts direct to torque plate
    • Fits all makes of sprint & midget chassis
    • Accepts all popular fuel injection pumps
    • Weighs only 2.5 lbs. (including mount bracket)
    • Relief valve set at 1400 PSI
    • 3/8" hex drive male input and female output
  • KSE Racing Products KSC1030-001 Fontana Midget Power Steering Pump
    KSE Racing Products KSC1030-001 Fontana Midget Power Steering Pump
    x
                KSE reverse rotation pump specifically for Fontana midget engines. Will only work on the Fontana Midget motors. 
            
  • KSE Racing KSC1056 Tandem Pump Bracket for Small Block Chevy
    KSE Racing KSC1056 Tandem Pump Bracket for Small Block Chevy
    x
                Mount bracket for KSE Tandem Power Steering and Fuel pumps. Pump mounts off water pump on Small Block Chevy. 
            
  • KSE Racing Products KSD1002 Aluminum Front Cover-Standard Cam Position
    KSE Racing Products KSD1002 Aluminum Front Cover-Standard Cam Position
    x
                

    With over twenty years of race-proven performance and durability, KSE front covers and water pumps are preferred by the nation’s premier engine builders. For small block Chevy.

    • Compatible with all gear and chain cam drive systems
    • Bolt patterns accept all popular dry sump pumps and fuel
  • KSE Sprint Wing Valve Tab
    $6.99
    KSE Sprint Wing Valve Tab
    x
                

    These tabs work with all slider valves. They are a weld-on steel bracket for your Sprint or Midget race car.

    • Weld-On
    • Works with all wing slider valves
    • Steel construction
    • KSE style factory chassis component
  • KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    x
                

    Special high-flow -3 O-ring boss to 37 degree JIC -4 AN fitting for KSE Gen II half box wing slider.

  • KSE Racing Products KSD1013 Lexan Timing Window Cover
    KSE Racing Products KSD1013 Lexan Timing Window Cover
    x
                

    Lexan timing window cover for KSE front pumps.

  • Goodridge KSE-GEN2-01 Gen2 Supply Hose
    Goodridge KSE-GEN2-01 Gen2 Supply Hose
    x
                Flexible woven outer sheath allows maximum flexibility for connecting the pump and gear within a tight area. Inner material prevents collapsing and distortion by tight bends or high suction.
            
  • KSE Racing Products KSD1009 Block Mount Hose Adapter
    KSE Racing Products KSD1009 Block Mount Hose Adapter
    x
                

    Hose mounting adapter for small block Chevy water pump block ports.

  • KSE Racing Products KDEGEN2L-5652B Black Gen2 Power Steering Gear
    KSE Racing Products KDEGEN2L-5652B Black Gen2 Power Steering Gear
    x
                
    • Sleek, black anodized finish
    • Lightweight, gundrilled cross-shaft
    • Same performance and durability as the original Gen2 steering gear
  • KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    x
                
    • Engineered hydraulic sprint wing cylinder
    • Internal quad seal technology – 1300 psi
    • Heim bearing mounting and standard porting
    • Standard 10” cylinder length
  • KSE Racing Products KSGEN2L-3462 Gen II Midget Half Box
    KSE Racing Products KSGEN2L-3462 Gen II Midget Half Box
    x
                This Gen II midget half box offers a cleaner and easier installation and plumbing that other boxes.  It is smoother and has a more postive feel, and is engineered for strength and weight savings.
            
  • KSE Racing KSGNE2L-5852 Gen II Half Box Steering Unit, 18 Inch Output
    KSE Racing KSGNE2L-5852 Gen II Half Box Steering Unit, 18 Inch Output
    x
                

    The Gen2 power steering gear is the product of years of R&D and has helped revolutionize the sprint car steering system with its integral reservoir and in-board mount design. Since its initial release, the Gen2 has quickly become the sprint car industry’s most widely used power steering system.

    • Half box design for cleaner and easier installation and plumbing
    • Smoother, more positive feel
    • Engineered for strength and weight savings
    • Built-in reservior eliminates turbulence and aeration
    • Wing slider ports come standard (fitting sold separately)
    • A -10 line from the built-in reservoir to the pump inlet and a -6 pressure line from the pump to the pressure port is all that is needed
  • KSE Racing Products KSD1001 Standard Water Pump Only
    KSE Racing Products KSD1001 Standard Water Pump Only
    x
                
    • Timing window with four possible locations
    • Eight variable inlet port locations
    • Indestructible welded tang drive
    • Mechanical ceramic seal 
    • 1-1/2" inlet fitting
    • Two 3/4" NPT outlets
    • Cast swept 6-vane impeller
    • Designed for engines up to 700 HP
  • KSE Racing KSGEN2L-5652 Gen II Half Box Steering Unit, 16 Inch Output
    KSE Racing KSGEN2L-5652 Gen II Half Box Steering Unit, 16 Inch Output
    x
                

    The Gen2 power steering gear is the product of years of R&D and has helped revolutionize the sprint car steering system with its integral reservoir and in-board mount design. Since its initial release, the Gen2 has quickly become the sprint car industry’s most widely used power steering system.

    • Half box design for cleaner and easier installation and plumbing
    • Smoother, more positive feel
    • Engineered for strength and weight savings
    • Built-in reservior eliminates turbulence and aeration
    • Wing slider ports come standard (fitting sold separately)
    • A -10 line from the built-in reservoir to the pump inlet and a -6 pressure line from the pump to the pressure port is all that is needed
  • KSE Tandem Dual Pump HTD Drive Kit
    KSE Tandem Dual Pump HTD Drive Kit
    x
                Kit comes with a 40 tooth upper pulley, 19 tooth lower pulley, and a 33.1" HTD drive belt.
            
  • KSE KSD10-11000 Billet Front Cover and Water Pump Assembly
    KSE KSD10-11000 Billet Front Cover and Water Pump Assembly
    x
                
    These assembly kits feature a billet aluminum Small Block Chevy front timing cover and a complete water pump with a cast aluminum housing, designed for use with Oval track racing applications.
    • Billet aluminum construction with cast aluminum housing
    • Small Block Chevy
    • Inlet Diameter: 1.500"
    • Outlets: Two 3/4" NPT
    • Impeller: Billet aluminum swept 6-vane design
    • Drive: Tang Mechanical ceramic shaft seal
    • Used on 90+% of 360 / 410in³ sprint car engines
    • Compatible with all gear and chain cam drive system
    • Bolt patterns accept all popular dry sumps
    • Standard cam position
    • Top timing port
  • KSE Racing Products KSC1069 Power Steering Pump Rebuild Kit
    KSE Racing Products KSC1069 Power Steering Pump Rebuild Kit
    x
                

    Bearing and seal kit for pump KSC1068-002.

  • KSE Racing Products KSG 2000 Stingray Wing Valve
    KSE Racing Products KSG 2000 Stingray Wing Valve
    x
                3-piece billet aluminum with a low profile and ergonomic "Formula 1" style handle.  High-flow porting and precision seal technology compliment the lightweight design which is over 30% lighter than other valves.
            
  • KSE Racing Products KSG1070 Aluminum Half Box Mount
    KSE Racing Products KSG1070 Aluminum Half Box Mount
    x
                Center to center measurement of the mounting holes is 12 inches. This part will not fit a midget chassis.
            
  • Quarter Master 117013 Pump Mount For KSE
    Quarter Master 117013 Pump Mount For KSE
    x
                Bracket needed to mount KSE Tandem-X pumps to Quarter Master Bell Housing assembly. Will also need to purchase part #91010500
            
  • KSE Racing Products KSD10-10000 Front Cover and Water Pump Kit
    KSE Racing Products KSD10-10000 Front Cover and Water Pump Kit
    x
                

    Compatible with all gear and chain drive systems. Features bolt patterns to accept all popular dry sump pumps or fuel pumps. Includes timing window with four possible locations and eight variable inlet port locations. Kit comes complete with front drive adaptor and two hose mounting adaptors for water pump block ports.

    • Indestructible welded tang drive
    • Mechanical ceramic seal 
    • 1-1/2" inlet fitting
    • Two 3/4" NPT outlets
    • Cast swept 6-vane impeller
    • Designed for engines up to 700 HP
  • KSE Tandem and Fuel Pump Mounting Kit for Bert/Brinn Transmission
    KSE Tandem and Fuel Pump Mounting Kit for Bert/Brinn Transmission
    x
                
            
Goto Previous PagePrevious Page
1 2