Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Products
Brand Banners -  KSE Racing
Searched For:

KSE

Loading...
  • KSE Racing Products KSM1086 KSE Elixer Power Steering Fluid
    KSE Racing Products KSM1086 KSE Elixer Power Steering Fluid
    x
                

     

    With the frequency and pressure of racing power assist being twice that of stock power systems, it’s obvious that stock power steering fluid is not adequate. Would you use 10W30 motor oil in a racing engine? Of course not! That is why KSE has developed a power steering fluid designed to handle the stresses of racing power steering.


    The Elixer has a higher viscosity index, anti-foaming, anti-wear, and anti-oxidation capabilities to handle the racing power steering stresses. The Elixer will minimize power assist fade, low-corner- speed assist loss, and decrease heat generation. We also have made the color a “cool” blue to help in identifying oil leak origins.


    The Elixer completes the total racing power steering system. When it comes to steering, go with a name you can trust...KSE!

     

  • KSE Racing Products KSC1077Seal Kit for KSE Direct Drive TandemX Pump
    KSE Racing Products KSC1077Seal Kit for KSE Direct Drive TandemX Pump
    x
                Seal Kit for KSE Direct Drive TandemX Pump

    910-32936 Information sheet (PDF)

  • Billet Aluminum Impeller for KSE Water Pump
    Billet Aluminum Impeller for KSE Water Pump
    x
                Here's one of the secrets the "big time" engine builders are using to keep their engines alive.   

    This high flow replacement impeller for the KSE pump cures the cavitation problem common through the midrange power band. An easy fix for the KSE pump.

  • KSE Racing Products KSD1033 Water Pump Rebuild Kit
    KSE Racing Products KSD1033 Water Pump Rebuild Kit
    x
                
    Rebuild your KSE water pump. Kit comes with water pump shaft, bearings, seals and o-rings.

  • KSE Racing Products KSC1064-002 Tandem-X Belt Drive Pump
    KSE Racing Products KSC1064-002 Tandem-X Belt Drive Pump
    x
                

    This is the new and improved KSE tandem power steering and fuel pump. It is the replacement for your existing KSE pump, but with improvements made to both pumps. The fuel pump has a built-in bypasss. Mounting bracket, drive mandrel, and belt drive sold separately.


    910-32935 Information Sheet (PDF)

  • KSE KSG1027 Quick Release Steering Wheel Hub, 1-1/4 Inch 19-Spline
    KSE KSG1027 Quick Release Steering Wheel Hub, 1-1/4 Inch 19-Spline
    x
                

    KSE billet aluminum positive lock style quick release steering wheel hub for newer KSE steering unit. Hub type, no pin.

     

    • 1.25 Inch 19-Spline
    • Pull Type
    • Schroeder Splined 
    • Quick Release
    • Billet Aluminum

     

  • KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    KSE Racing Products KSC1068-002 Rear Mount Power Steering Pump
    x
                

    The KSE HPD power steering pump is 1.4 lb. lighter and 25% more efficient than the previous design. Large AN 10 inlet eliminates cavitation up to 10,000 engine RPM. Requires AN 10 supply line.

    • Mounts direct to torque plate
    • Fits all makes of sprint & midget chassis
    • Accepts all popular fuel injection pumps
    • Weighs only 2.5 lbs. (including mount bracket)
    • Relief valve set at 1400 PSI
    • 3/8" hex drive male input and female output
  • KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    x
                

    Special high-flow -3 O-ring boss to 37 degree JIC -4 AN fitting for KSE Gen II half box wing slider.

  • KSE Racing Products KSG1070 Black Series Notched Steering Gear Mount
    KSE Racing Products KSG1070 Black Series Notched Steering Gear Mount
    x
                
    • Sleek, black anodized finish
    • Works with KSE Gen2 power steering gear
  • KSE KSC1076 Tandem Pump Rebuild Kit, Serial Number 5267 & Newer
    KSE KSC1076 Tandem Pump Rebuild Kit, Serial Number 5267 & Newer
    x
                

    Rebuild kit for KSE Direct Drive Tandem Power Steering Pumps # 910-32910 with a serial number of 5267 or higher, "newer model."

  • KSE Racing Products KSF2000-010 Vertical Reservoir Tank with Filter
    KSE Racing Products KSF2000-010 Vertical Reservoir Tank with Filter
    x
                KSE vertical power steering reservoir tanks are a lightweight aluminum design. Features an internal filter, vented cap and AN 6 inlet/AN 10 outlet. Mount with bracket at right.  
    • Adequate fluid dwell time for cooling and de-aration under all racing conditions
    • Improved cooling
    • Minimizes pump starvation (cavitation) under hard cornering conditions
    • Internal Filter
    • Vented Cap
    • Optimim inlet/outlet size and locations
    • Overall Height:  7-3/4"
    • Diameter:  3-1/2"
  • KSE Racing Products KSD1011 Steel Crank Adapter/Pump Drive
    KSE Racing Products KSD1011 Steel Crank Adapter/Pump Drive
    x
                

    Steel crank drive (water pump) adapter for KSE front cover and water pump.

  • KSE Racing Products KSD1013 Lexan Timing Window Cover
    KSE Racing Products KSD1013 Lexan Timing Window Cover
    x
                

    Lexan timing window cover for KSE front pumps.

  • KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    KSE Racing Products KSC1065-002 Direct Drive TandemX Pump
    x
                

    The all new KSE TandemX Pump is based upon the design of its popular predecessor and is a highly developed “two-in-one” high performance power steering & fuel pump. This pump has been designed to help simplify the racer’s engine setup and plumbing while providing the utmost in performance and durability. The TandemX Pump utilizes a single shaft drive to operate both the power steering and fuel pumps or reduced mechanical efficiency losses. The TandemX Pump is compact and is designed to fit almost any racing application with a variety of sizes and mounting configurations.

    • Mount on Back of Dry Sump Pump (CCW Rotation)
    • Cam Drive Pump Off Back of Engine
    • 3/8” Male Hex Drive
  • KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    KSE Racing Products KSG2001-010 Stingray Wing Cylinder
    x
                
    • Engineered hydraulic sprint wing cylinder
    • Internal quad seal technology – 1300 psi
    • Heim bearing mounting and standard porting
    • Standard 10” cylinder length
  • KSE Tandem and Fuel Pump Mounting Kit for Bert/Brinn Transmission
    KSE Tandem and Fuel Pump Mounting Kit for Bert/Brinn Transmission
    x
                
            
Goto Previous PagePrevious Page
1 2 3