Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"9 inch ford gears" Page 1 of 3

  • 9 Inch Ford Ring & Pinion, 3.50 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.50 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Gear Bearing Retaining Clip
    9 Inch Ford Gear Bearing Retaining Clip
    x
                Retains the small pinion gear snout bearing. 
            
  • Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    Richmond Gear 92-0690-2800 Powertrax Ford 9 Inch Locking Differential
    x
                

    The Powertrax Traction System is the latest design in traction adding differential technology. It combines the smooth operation of a limited-slip differential, with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring design reduce the backlash and therefore driveline windup. An ultra-strength alloy material is used throughout, which is 67% stronger than titanium.

    Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed (installs in about one hour). Step by step model specific instructions are provided with every kit.

    • Positive traction - full locker
      • Delivers engine power to both wheels when coming off the line
      • Upgrade and improve your times and your vehicles reputation 
    • Smooth quiet operation - fully automatic
    • Do-it-yourself - installs in about one hour
    • No special tools required
    • Works for both cars and trucks
    • Gives 2-wheel drive trucks the traction power of 4x4's
    • Excellent replacement for Trac loc style lockers
  • 9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.70 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Ring Gear Bolts for 9 Inch Ford, 10 PK
    Ring Gear Bolts for 9 Inch Ford, 10 PK
    x
                Ring gear bolts for 9" Ford. Pack of ten.
            
  • 9 Inch Ford Ring & Pinion, 3.89 Gear Ratio
    9 Inch Ford Ring & Pinion, 3.89 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.00 Gear Ratio
    9 Inch Ford Ring & Pinion, 6.00 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Rear End Overhaul Kit
    9 Inch Ford Rear End Overhaul Kit
    x
                This 9" Ford overhaul kit includes: pinion pilot, pinion shaft, pinion nut, pinion seal, gasket, shims, crush collar, sealant, gear marking grease, brush and Loctite. Ring gear bolts not included. 

    NOTE: All Ford 9" full spools use overhaul kit 9190950-31, even if they are a 28-spline spool. The 9190950-31 contains the large I.D. standard O.D. carrier bearings and pinion bearings needed for use with our full spools.

    If you are using the H.D. nodular iron center section which uses the large diameter carrier bearings, order kit 9190950-31s, which also includes the large pinion bearings for use with the Daytona pinion support.

    9" Ford Carrier Bearing Chart (GIF)  - Double check your bearing p/n.

  • Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    Axle Housing Inner Seal, 9 Inch Ford Grand National/Quick Change Rearends
    x
                

    High cornering forces can force the gear lube out of the center section and down the axle tube leaving the ring and pinion high and dry! This billet aluminum seal has three O-rings that seal it to the axle tube and two bonded, heavy duty, neoprene inner seals designed to compensate for any amount of axle shaft runout. Keeps gear oil in the center section. These seals will take up to an 1.5” diameter axle.

    • Anodized billet aluminum
    • A must for cambered rear ends
    • For 9" Ford Grand National and Quick Change type housings
    • For up to 1.5” diameter axle
    • Keeps gear oil in the center section
    • Outside Diameter: 2.56"
    • Overall Length: 1.50"
    • This seal will fit our steel wide 5 axle
    • Choose housing tube I.D. size needed:
      • 2.500" - Gold
      • 2.562" - Blue
      • 2.625" - Red
      • 2.750" - Silver

    919-0951 Instructions (PDF)

  • Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    x
                Please view the product's page for more information
            
  • 9 Inch Ford Ring & Pinion, 4.11 Gear Ratio
    9 Inch Ford Ring & Pinion, 4.11 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    x
                Please view the product's page for more information
            
  • 9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    9 Inch Ford Ring & Pinion, 4.86 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.50 Gear Ratio
    9 Inch Ford Ring & Pinion, 6.50 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Ultra-Lite Ford 9 Inch Ring Gear & Pinion, 6:50 Ratio
    Ultra-Lite Ford 9 Inch Ring Gear & Pinion, 6:50 Ratio
    x
                
    • Ultra lightweight ring gear and pinion for 9" Ford
    • Speedway's in-house lightening process can remove up to 2.6 lbs of rotating weight from your drivetrain
    • Less rotating mass for faster acceleration
  • Currie 9 Inch Ford Rear Axle Kit
    Currie 9 Inch Ford Rear Axle Kit
    x
                Please view the product's page for more information
            
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.00 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.00 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.83 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.83 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.33 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.33 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.20 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 6.20 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.29 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.29 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.43 Ratio
    Speedway Ultra-Lite Ford 9 Inch Ring Gear, 5.43 Ratio
    x
                
    • Ultra lightweight ring gear and pinion
    • Speedway's in house lightening process can remove up to 2.6 lbs of rotating weight from your drive train
  • 9 Inch Ford Pinion Crush Sleeve
    9 Inch Ford Pinion Crush Sleeve
    x
                Stock replacement crush collar/sleeve for Ford 9" rear axles. Collapsible spacer installs on the pinion and preloads the pinion bearings. Crush sleeves are not reusable and must be replaced if the pinion nut is loosened or removed.
            
  • All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    x
                

    Our completely NEW 9" Ford third members start with an aftermarket heavy-duty cast iron carrier featuring a new cast iron Daytona pinion support and larger bearings. Then we use your choice of a standard (8.9 lbs.), lite (6 lbs.) or megalite (5.55 lbs.) steel full spool.

    Each is available with your choice of 3.50:1 to 7.33:1 gear ratio ring & pinion. Also includes NEW bearings and Viton high-temperature seals. Professionally assembled for oval track race use and shipped in a re-useable plastic storage case.

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013).

  • 9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    9 Inch Ford Ring & Pinion, 4.56 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Small Yoke
    $64.99
    $74.99
    Product Rating: 5.00 Stars
    9 Inch Ford Small Yoke
    x
                We found a limited supply of new small yokes for the 9" Ford.  They accept the 1310 series U-joints (1-1/16" caps x 3-7/32").  Fits standard 28 spline pinion gear.
            
  • Premium 9 Inch Ford Mini Spool, 31 Spline
    Premium 9 Inch Ford Mini Spool, 31 Spline
    x
                

    Our forged 8620 steel mini spools are designed to replace the spider gears inside the stock differential carrier. This premium mini spool features a larger diameter for maximum strength. It works great for most dirt applications and some asphalt.

    For Ford 8 or 9" rear axles. Will NOT work on posi carrier. Use with 3/4" chromoly cross pin (listed).

  • 9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    9 Inch Ford Ring & Pinion, 6.33 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.14 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.14 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 6.20 Gear Ratio
    9 Inch Ford Ring & Pinion, 6.20 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.83 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.83 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.43 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.43 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.00 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.00 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 4.71 Gear Ratio
    9 Inch Ford Ring & Pinion, 4.71 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.67 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.67 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 4.30 Gear Ratio
    $184.99
    $189.99
    Product Rating: 5.00 Stars
    9 Inch Ford Ring & Pinion, 4.30 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • 9 Inch Ford Ring & Pinion, 5.29 Gear Ratio
    9 Inch Ford Ring & Pinion, 5.29 Gear Ratio
    x
                This product offers exceptional strength and service life at a great price! We offer a huge selection of ratios for your 9" Ford axle. 

    Other ratios from 4.78 thru 7.33 available in our Lightened Gear series. (Part numbers 91919-478, 91919-525, 91919-614, 91919-666, 91919-683, 91919-700, 91919-716, 91919-733).

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Instructions (PDF)

  • Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
    Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
    x
                Please view the product's page for more information
            
  • Motive Gear Ford 9 Inch Performance Ring and Pinion, 1957 - Up Style
    New
    Motive Gear Ford 9 Inch Performance Ring and Pinion, 1957 - Up Style
    x
                

    Motive Gear 9" Performance Style 1957 & Up ring and pinion gear sets are quality assured and tested to take a beating in your aluminum or steel housing.  Computer-controlled heat treatment, index tooth spacing, and CNC machining all go into this series of performance gear sets. 

    • 10 Bolt 3rd member
    • Aluminum or steel housing
    • Ring gear diameter 9"
    • 10-7/16" x 20 RH threaded bolts
    • Pinion diameter 1.313" 28 splines
    • No case breaks
    • 8620 Material - Heat Treated
    • Choose your ratio

    Note:  Circle track racing applications require a minimum of 4 qts. of rear end lube.  Using less than this amount will lead to immediate pinion bearing failure.

    Motive Gear Performance Ring and Pinion Chart (GIF)   

  • Currie 9+-98135 9 Inch Ford Cut-To-Fit 31 Spline Axle, 35 Inch
    Currie 9+-98135 9 Inch Ford Cut-To-Fit 31 Spline Axle, 35 Inch
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3