Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"9 bolt steering wheel" Page 1 of 1

  • Metalflake Steering Wheels, 9-3/4 Inch
    Metalflake Steering Wheels, 9-3/4 Inch
    x
                

    Give your ride some colorful '60s flare with this three-spoke chrome steering wheel. To attach a horn button, you will need the Grant 3-bolt adapter.

  • Convex Steering Adapter for Speedway Hot Rod/Nostalgia Steering Columns
    Convex Steering Adapter for Speedway Hot Rod/Nostalgia Steering Columns
    x
                

    This Speedway exclusive steering column adapter utilizes the Speedway Motors Nostalgia and Hot Rod steering columns in combination with any after market 9-bolt steering wheel and it replaces the race car type quick disconnect adapter as utilized on the Hot Rod/Nostalgia columns. The new convex adapters utilize a secure tension mounting plate and hardware.

    • Speedway exclusive
    • Convex style
    • Works with Speedway Motors Nostalgia and Hot Rod steering columns and after market 9-bolt steering wheels
    • Mounting plate and hardware included

     

  • Lecarra 71000 Mark 10 Steering Wheel, 15 Inch, Gloss Black
    Lecarra 71000 Mark 10 Steering Wheel, 15 Inch, Gloss Black
    x
                

    Now there's a steering wheel that looks like it belongs in your fat fendered beauty. The Lecarra Mark 10 steering wheel brings back feelings of the best of times from an older era. Like the original equipment wheels of its time, the Mark 10 features a hard painted rim and functional horn ring accessories.

    • 15" diameter hard frame
    • Gloss back (painted) finish
    • Optional billet horn accessories (sold separately) are fully functional
    • Works with all Lecarra 9-bolt hub adapters
  • Lecarra 72000 Mark 10 Steering Wheel, 15 Inch, Unpainted
    Lecarra 72000 Mark 10 Steering Wheel, 15 Inch, Unpainted
    x
                

    Now there's a steering wheel that looks like it belongs in your fat fendered beauty. The Lecarra Mark 10 steering wheel brings back feelings of the best of times from an older era. Like the original equipment wheels of its time, the Mark 10 features a primed rim (ready for paint)  and functional horn ring accessories.

    • 15" diameter hard frame
    • Primed, unpainted finish
    • Optional billet horn accessories (sold separately) are fully functional
    • Works with all Lecarra 9-bolt hub adapters
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Speedway Classic Solid Spoke 9-3/4 Inch Black Steering Wheel - No Holes
    Speedway Classic Solid Spoke 9-3/4 Inch Black Steering Wheel - No Holes
    x
                

    Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount.  These wheels feature rubber grips and are made of steel.  Chrome cap is included.

    • Smooth black cushion
    • 3 bolt pattern mount
    • Steel
    • Chrome cap included

    Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel.  We offer our corresponding retainer (41010112) and various adapter kits for your specific application. 

  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Chrome Plated Billet Banjo Style Steering Wheel
    Chrome Plated Billet Banjo Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column.  Wheel has a 2" dish.  Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • Speedway Classic 9-3/4 Inch Black Steering Wheel w/ Holes
    Speedway Classic 9-3/4 Inch Black Steering Wheel w/ Holes
    x
                

    Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount.  Wheels feature rubber steering wheel grip.  Chrome center cap is included.

    • Smooth black cushion
    • 3 bolt pattern mount
    • Steel
    • Chrome cap included

    Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel.  We offer our corresponding retainer (41010112) and various adapter kits for your specific application. 

     

  • Chrome Plated Billet Wings Style Steering Wheel
    Chrome Plated Billet Wings Style Steering Wheel
    x
                

    This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.

  • Chrome Plated Billet T-Style Steering Wheel
    Chrome Plated Billet T-Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet 4-Slot Style Steering Wheel
    Chrome Plated Billet 4-Slot Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design. 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column.  Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet Trinity Style Steering Wheel
    Chrome Plated Billet Trinity Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet Boomerang Style Steering Wheel
    Chrome Plated Billet Boomerang Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Concave Steering Adapter for Speedway Hot Rod/Nostalgia Steering Columns
    Concave Steering Adapter for Speedway Hot Rod/Nostalgia Steering Columns
    x
                

    This Speedway exclusive steering column adapter utilizes the Speedway Motors Nostalgia and Hot Rod steering columns in combination with any after market 9-bolt steering wheel and replaces the race car type quick disconnect adapter as utilized on the Hot Rod/Nostalgia columns. The new concave adapters utilize a secure tension mounting plate and hardware.

    • Speedway exclusive
    • Concave style
    • Works with Speedway Motors Nostalgia and Hot Rod steering columns and after market 9-bolt steering wheels
    • Mounting plate and hardware included
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 52-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3944 Instructions (PDF)

  • Horn Button for Hub Adaptor 9105602
    Horn Button for Hub Adaptor 9105602
    x
                Complete the installation of your 9-bolt chrome plated billet steering wheel assembly with this chrome-plated aluminum horn button.
            
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 54-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3946 Instructions (PDF)

  • Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    Swindell Series by Ti64 Ti Sprint Car Front Axle Bolt Kit
    x
                

    This custom kit was put together for the Swindell Series front end kits (940-358/940-368). This is included in those axle kits, or buy it as a replacement set. 

    Kit includes:

    • (2)  3/8" AN Washer
    • (2) 3/8"-24 x 1" Hex Head Bolt, LF Caliper to Bracket
    • (3) 1/2"-20 x 1" Countersunk Screw, LF Rotor
    • (2) 1/2"-20 x 2" Hex Head Bolt, LF Steering Arm to Spindle
    • (2) 1/2"-20 x 1.5" Hex Head Bolt, RF Steering Arm
    • (1) 1/2"-20 x 2.75" Hex Head Bolt, Sway Bar to Frame
    • (4) 1/2"-20 x 4" Hex Head Bolt, Tie Rod/Drag Link
    • (3) 1/2"-20 x 1.5" Hex Head Bolt, Axle to Radius Rods
    • (4) 1/2" AN Washer
    • (9) 1/2"-20 Nylock 1/2" Height Locknuts
  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
  • Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto rotors and calipers onto your machined Chevy 1949-54 car spindles. Disc brake kit is desigend for use only on street rod tube front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends. This kit includes two 9-1/4" rotors with a Ford bolt pattern.

    • 9-1/4" brake rotor, 5 x 4-1/2" wheel bolt pattern
    • Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, and hardware
    • Instructions included

    Note: Will not work with traditional style steering (no room for upper steering arm). Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.

    910-31947 Instructions (PDF)

  • Tru-Lite Titanium Bolt, 1/4-28 Fine Thread, 1-7/8 Inch Long, 7/16 Inch Hex Head
    Tru-Lite Titanium Bolt, 1/4-28 Fine Thread, 1-7/8 Inch Long, 7/16 Inch Hex Head
    x
                

    These fine thread Tru-Lite titanium bolts feature heat treated rolled threads. Titanium bolts have a greater tensile strength than Grade 8 bolts at half the weight. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.

    • Fine thread Titanium
    • Greater tensile strength than Grade 8 bolts
    • 3 times the strength of aluminum
    • 42% lighter than steel
    • 1/4"-28 X 1-7/8"
    • 7/16" Hex Head
    • Application: steering gear to frame

     

  • Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    x
                Please view the product's page for more information
            
  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Garage Sale - Chrome Aluminum 9-bolt Steering Wheel Horn Button
    Garage Sale
    Garage Sale - Chrome Aluminum 9-bolt Steering Wheel Horn Button
    x
                Please view the product's page for more information
            
  • Swindell Series 9.75 Inch Pitman Arm
    Swindell Series 9.75 Inch Pitman Arm
    x
                
    2012 Swindell Series "short" 9.75" pitman arm. Machined from 1" billet aluminum bar stock, it features 10 degree angled offset and includes increased gear mating surface. This beautiful, two-tone black anodize arm has a solid face for less flex and hidden pockets on the back side for less weight. Includes steel pinch bolt.  
     
     
     
  • Eagle Motorsports Sprint Car Straight Pitman Arm
    Eagle Motorsports Sprint Car Straight Pitman Arm
    x
                
    Eagle Motorsports factory-built component.
    • Two attachment points for quick adjustments
    • Tapered design to maximize spline engagement
    • Increased gear mating surface
    • Integrated rod end spacers
    • Pocketed for superior strength and weight savings
    • Two tone black anodize finish
    • Machined from bar stock, taper milled to a 3/4" end
    • Includes pinch bolt
    • 9-3/4" & 10-3/4" centerline to centerline rod end holes
  • Eagle Motorsports Sprint Car Angled Pitman Arm
    Eagle Motorsports Sprint Car Angled Pitman Arm
    x
                
    Eagle Motorsports factory-built component.
    • Two attachment points for quick adjustments
    • Tapered design to maximize spline engagement
    • Increased gear mating surface
    • Integrated rod end spacers
    • Pocketed for superior strength and weight savings 
    • Two-tone black anodize finish
    • Machined from bar stock, taper milled to a 3/4" end
    • Includes pinch bolt
    • 9 3/4" and 10 3/4" centerline to centerline rod end holes
  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Garage Sale - Chrome Steering Wheel Adapter
    Garage Sale
    Garage Sale - Chrome Steering Wheel Adapter
    x
                

    Complete the installation of your 9-bolt Chrome Plated Billet steering wheel with this chrome-plated aluminum hub adapter (fits 1967-94 GM columns).

     

    This Adapter is Garage Sale priced because the chrome is bubbling in one spot.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Chrome Aluminum Steering Wheel Adaptor
    Garage Sale
    Garage Sale - Chrome Aluminum Steering Wheel Adaptor
    x
                

    Complete the installation of your 9-bolt Chrome Plated Billet steering wheel with this chrome-plated aluminum hub adapter (fits 1967-94 GM columns).

     

    This Adapter is Garage Sale priced because the splines are not the best.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Horn Button For Hub Adaptor 9105602
    Garage Sale
    Garage Sale - Horn Button For Hub Adaptor 9105602
    x
                

    Complete the installation of your 9-bolt chrome plated billet steering wheel assembly with this chrome-plated aluminum horn button.

     

    This horn button is garage sale priced because it has some pits in the chrome finish.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Swindell Series 9.75 Inch Pitman Arm
    Garage Sale
    Garage Sale - Swindell Series 9.75 Inch Pitman Arm
    x
                

    2012 Swindell Series "short" 9.75" pitman arm. Machined from 1" billet aluminum bar stock, it features 10 degree angled offset and includes increased gear mating surface. This beautiful, two-tone black anodize arm has a solid face for less flex and hidden pockets on the back side for less weight. 

     

     This pitman arm is garage sale priced because it has been bolted on and it is missing the pinch bolt.

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS