Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"5 8 inch bracket" Page 1 of 6

  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
    Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
    x
                Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

    NOTE: For use with spherical rod ends.
  • Low Rear Axle Bracket 5 3/4 Inch
    Low Rear Axle Bracket 5 3/4 Inch
    x
                All brackets are for 3" rear axle application.

    Low Rear Axle Bracket
    Mount radius rods lower than rear axle. 3/8" steel. 5-3/4" long. 3/8" holes.
  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 2-3/4 Inch
    Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 2-3/4 Inch
    x
                Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

    NOTE: For use with spherical rod ends.
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Speedway Midget Axle Assembly for Spike Chassis
    Speedway Midget Axle Assembly for Spike Chassis
    x
                

    You get everything you need, but you do the assembly. Speedway's 45" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit.

    Radius rod brackets are 30 1/4 from center to center. 1 inch wide OD 5/8 inch ID with a half inch hole through them. 5 1/8" from king pin center to hole in tie rod end. 5 1/8" from king pin to first hole in steering arm 6 1/8th for the second hole. 

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Speedway 2 5/8 Inch Oil Temperature Gauge
    Speedway 2 5/8 Inch Oil Temperature Gauge
    x
                

    Lightweight 2 5/8” Speedway Motors gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 100 – 280 deg. F. Also included with the gauge is a mounting bracket with all necessary hardware, 6ft. capillary tube, sending unit adaptor, and complete installation instructions.

     910-65019 Instructions (pdf)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Speedway 2 5/8 Inch Water Temperature Gauge
    Speedway 2 5/8 Inch Water Temperature Gauge
    x
                

    Lightweight 2 5/8” Speedway gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlit, white face makes these gauges easy to read from 100° – 280° F.

    Also included with the gauge is a mounting bracket with all necessary hardware, 6ft. capillary tube, sending unit adapter, and complete installation instructions.

    910-65016 Instructions (PDF)

  • Weld-On Chassis Tabs, 1-3/4 Inch with 3/8 Inch Hole
    Weld-On Chassis Tabs, 1-3/4 Inch with 3/8 Inch Hole
    x
                

    Weld on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • Speedway 2 5/8 Inch Oil Pressure Gauge
    Speedway 2 5/8 Inch Oil Pressure Gauge
    x
                

    Lightweight 2-5/8” Speedway Motors gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 0 – 100PSI. Also included with the gauge is a mounting bracket with all necessary hardware, tubing kit, and complete installation instructions.

    910-65013 Instructions (pdf)

  • Five Hole Mounting Bracket
    $4.99
    Product Rating: 5.00 Stars
    Five Hole Mounting Bracket
    x
                

    These 5 hole brackets mount to radius rods, brake rods, third links, panhard bars, etc. Hole sizes available include: 1/2", 5/8" & 3/4".  

    • 1/8" steel plate
    • 7-1/2" tall
  • Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Kool White Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Omega 5-Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Omega Kustom OK-21053 Tan 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom OK-21053 Tan 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Timeless Tan Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Docs Kustom 5-Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • AFCO 5-Hole Steel Mounting Bracket, 5/8 Inch Holes
    AFCO 5-Hole Steel Mounting Bracket, 5/8 Inch Holes
    x
                Use these AFCO 1/8" thick steel plates to mount radius rods, brake rods, third link, Panhard bars, etc.
            
  • DEi 010472 Fire Sleeve and Tape Kit, 5/8 Inch Diameter x 36 Inch Long
    DEi 010472 Fire Sleeve and Tape Kit, 5/8 Inch Diameter x 36 Inch Long
    x
                

    Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

    Each kit includes a 16-inch length of black Fire Tape to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.

    • Insulates wiring, hoses, oil / brake / transmission lines & more
    • Use for bundling and protecting hoses, electrical wiring etc.
    • Withstands 500°F continuous / 2000°F intermittent heat
    • Burn protection during under hood repairs and maintenance
    • Includes a 16” length of Fire Tape

    Fire Sleeve Frequently Asked Questions (PDF)

  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires a minimum 14-5/8" I.D. for caliper clearance 

    910-31923 Instructions (PDF)

  • AFCO 6-Hole Steel Mounting Bracket, 5/8 Inch Holes
    AFCO 6-Hole Steel Mounting Bracket, 5/8 Inch Holes
    x
                Use these AFCO 1/8" thick steel plates to mount radius rods, brake rods, third link, Panhard bars, etc.
            
  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM emergency brake calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires the use of 16" wheels as this kit has a minimum 14-5/8" I.D. for caliper clearance 

    910-31928 Instructions (PDF)

  • AFCO 20143B Tube Clamp Collar, 5 Inch Wide, 1/8 Inch Wall, 4 Bolt
    AFCO 20143B Tube Clamp Collar, 5 Inch Wide, 1/8 Inch Wall, 4 Bolt
    x
                

    AFCO Tube Clamp Collar

    • 5 Inch Wide
    • 1/8 Inch Wall
    • Mounts on 3" Tube
    • 4 Bolt
  • Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    Weld-On Chassis Tabs, 2-1/2 Inch with 3/8 Hole
    x
                

    Weld-on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Sprint and Midget Racing Parts, 1/2 Inch Titanium Birdcage Clevis
    Sprint and Midget Racing Parts, 1/2 Inch Titanium Birdcage Clevis
    x
                

    Titanium 1/2" birdcage clevis available will fit all Open Wheel Car's bird cages that allow for clevis.  The inside span on this clevis is app. 11/16" and it would use 3/8" bolts or clevis pins.  The threads on the shank are 1/2"-20, the thread length is app. 1-1/2".   The slot that’s in this clevis is .625 (5/8”) It should fit any standard heim that has a 1/2" hole.

    Sprint and Midget 1/2 Inch Titanium Birdcage Clevis

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Speedway 2-5/8 Inch Fuel Pressure Gauge
    Speedway 2-5/8 Inch Fuel Pressure Gauge
    x
                

    Lightweight 2-5/8” Speedway gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 0 – 15PSI. Also included with the gauge is a mounting bracket with all necessary hardware, tubing kit, and complete installation instructions.

    910-65011 Instructions (PDF)

  • Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/8” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Sold each, specify right or left.
    • Gaskets and bolts/hardware are not included
  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Omega Kustom 931053 Black 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom 931053 Black 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Kool White Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Docs Kustom Omega Gauge Instructions (PDF)

    Gauge Mounting Information (PDF)

  • 6-Volt Alternator for Wide 5/8 Inch Belt
    6-Volt Alternator for Wide 5/8 Inch Belt
    x
                

    If you are still running the 6-volt system on your car, truck or even tractor, the generator is your weak point. Even at highway speed that old generator cannot put out enough to keep up with the lights, heater motor and radio. This alternator puts out 60 amps at 7.5 volts at highway speeds, up to 30 amps at idle, and has the regulator built in. It includes the required plug and can be installed on almost any engine by modifying or purchasing a new mounting bracket.

  • Small Block Ford 289-351W Header Flange - 1-5/8 Inch
    Small Block Ford 289-351W Header Flange - 1-5/8 Inch
    x
                Build or modify your Small Block Ford headers with these exhaust manifold flange plates. Header flange only. Does not include adapter pipe.
            
  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • LS1 Chevy Header Flange Plates, Round Port, 1-5/8 Inch
    LS1 Chevy Header Flange Plates, Round Port, 1-5/8 Inch
    x
                

    LS1 Chevy exhaust manifold flange plates for headers have round ports and are CNC cut from 5/16" thick mild steel.

     

  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
  • Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
    x
                

    For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.

    Kit includes:

    • Two 1-3/4" spring shackles with nylon bushings
    • Two spring pivots
    • 26" 4 leaf Super Glide™ spring, 1-3/4" wide
    • Two axle brackets
    • Tube axle, 48" eye-to-eye, 6" drop
    • Two 27" radius rods
    • Four clevises with jam nuts and bolts
    • Two 5/8" heims with jam nuts
    • Spring U-bolts sold separately
Goto Previous PagePrevious Page
1 2 3 4 5 6