Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"5 5 8 inch spline joints" Page 1 of 1

  • Unisteer 8050290 Steering U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    Unisteer 8050290 Steering U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    x
                

    These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length

    This universal joints size is 5/8"-36 count spline by 3/4" DD Shaft. It is the common size for the Vega style steering box.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 5/8-36 Spline, 1 Inch DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline, 1 Inch DD, Vega/Corvair/GM Rack
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 5/8"-36 spline and feature forged Vanadium steel yokes.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 5/8-36 Spline to 1 DD, Vega, Corvair, GM
    Sweet Mfg Chrome Steering U-Joint, 5/8-36 Spline to 1 DD, Vega, Corvair, GM
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Double U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    Sweet Mfg Chrome Double U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • These are 5-3/4" Long
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    $64.99
    $69.99
    AFCO 30309 U-Joint, 5/8 Inch-36 Spline
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 5/8"-36 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double Steering U-Joint, 1 Inch-48 Spline to 3/4 Inch Round, GM Column
    Sweet Mfg. Double Steering U-Joint, 1 Inch-48 Spline to 3/4 Inch Round, GM Column
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    • Overall length is 5-1/2”
    • O.D. at ends is 1.12”
    • O.D. in the middle is 1.476”
    • O.D. at caps is 1.350”
    • O.D. at cap retainer screws is 1.545”
    • Length of center section is 2-3/4”
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Inch DD, GM, MII
    Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Inch DD, GM, MII
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. This Mustang II power rack U joint is made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch DD, GM Column
    Sweet Mfg. Double Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch DD, GM Column
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double Steering U-Joint, 9/16 Inch-26 Spline to 3/4 Inch Round, MII
    Sweet Mfg. Double Steering U-Joint, 9/16 Inch-26 Spline to 3/4 Inch Round, MII
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg. Double Steering U-Joint, 9/16 Inch-26 Spline to 3-4 Inch DD, MII
    Sweet Mfg. Double Steering U-Joint, 9/16 Inch-26 Spline to 3-4 Inch DD, MII
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Round, GM, MII
    Sweet Mfg. Double Steering U-Joint, 3/4 Inch 36-Spline to 3/4 Round, GM, MII
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. This Mustang II power rack steering universal joint is made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Mini Spool, 31-Spline
    x
                
    • Profesionally assembled for oval track racing only 
    • Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • 31-spline premium mini spool
    • New chromoly cross pin
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Includes 3-5/8"stock Ford yoke.

    910-48341 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

  • Ford 9 Inch Short Wide Steel Yoke, 1-1/8 Inch Cap Diameter
    Ford 9 Inch Short Wide Steel Yoke, 1-1/8 Inch Cap Diameter
    x
                

    These are short wide steel yokes with 1-1/8" cap diameter and 3-1/4" yoke height.  They fit Ford 9" with 1330 U-joint and 28 spline.  The mounted lenght on these yokes is 3.33" and the overall lenght is 4.03".  These steel yokes feature a natural finish.

    • 1-1/8" cap diameter
    • 3-5/8" wide u-join
    • 3-1/4" yoke height
    • Mounted lenght: 3.33"
    • Overall lenght: 4.03"
    • Natural finish
    • Steel
    • Fits Ford 9"

     

  • Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 28-Spline
    x
                
    • Professionally assembled for oval track racing only 
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48342 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    Ford 9 Inch Third Member Assembly, Full Spool, 31-Spline
    x
                
    • Professionally assembled for oval track racing only
    • Includes Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • Includes 3-5/8" stock Ford yoke
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Plastic storage case

    910-48343 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Order applicable spool:

    • STD = Standard
    • LITE = Lightweight
    • MEGA = Megalite

    Available options include machining of the yoke to accept Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013; 5.37:1, 6.66:1, 6.83:1, 7.00:1 ratios are already lightened).

  • All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    All NEW Ford 9 Inch Third Members, Full Spool, 28-Spline
    x
                

    Our completely NEW 9" Ford third members start with an aftermarket heavy-duty cast iron carrier featuring a new cast iron Daytona pinion support and larger bearings. Then we use your choice of a standard (8.9 lbs.), lite (6 lbs.) or megalite (5.55 lbs.) steel full spool.

    Each is available with your choice of 3.50:1 to 7.33:1 gear ratio ring & pinion. Also includes NEW bearings and Viton high-temperature seals. Professionally assembled for oval track race use and shipped in a re-useable plastic storage case.

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013).

  • Howe Racing 5225 Basic Steering Quickener, 1.5:1, 3/4 Inch 36-Spline
    Howe Racing 5225 Basic Steering Quickener, 1.5:1, 3/4 Inch 36-Spline
    x
                

    Howe Basic Steering Quickeners are made to meet the requirements of the job with no frills to keep the cost down. It has undergone extensive cycle and load testing to make sure that durability has not been comprimised. Thanks to the alloy steel gears and unique tooth design, it is far stronger and more durable than any other small housing quickener on the market. 

    3/4" 36-spline input and output. 8" overall length.

  • GM Front Slip Yoke, 8 Inch
    $69.99
    $79.99
    Product Rating: 5.00 Stars
    GM Front Slip Yoke, 8 Inch
    x
                

    Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Yoke is grooved for "external" snap rings to retain U-joint cups. Works with 1310 series U-joints.

    Fits over the output shaft of the following transmissions: 

    • Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft
    • Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions
    • Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions
  • All NEW Ford 9 Inch Third Members, Full Spool, 31-Spline
    All NEW Ford 9 Inch Third Members, Full Spool, 31-Spline
    x
                

    Our completely NEW 9" Ford third members start with an aftermarket heavy-duty cast iron carrier featuring a new cast iron Daytona pinion support and larger bearings. Then we use your choice of a standard (8.9 lbs.), lite (6 lbs.) or megalite (5.55 lbs.) steel full spool.

    Each is available with your choice of 3.50:1 to 7.33:1 gear ratio ring & pinion. Also includes NEW bearings and Viton high-temperature seals. Professionally assembled for oval track race use and shipped in a re-useable plastic storage case.

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) and lightening of the ring gear to remove weight (add 91600013).

  • Ford 9 Inch Third Member Assembly, Mini Spool, 28-Spline
    Garage Sale
    Ford 9 Inch Third Member Assembly, Mini Spool, 28-Spline
    x
                
    • Profesionally assembled for oval track racing only 
    • Pro Gears ring & pinion
    • Your choice of gear ratio, 3.50:1 to 7.33:1
    • 28-spline premium mini spool
    • New chromoly cross pin
    • Viton high heat pinion seal
    • Solid pinion bearing spacer with shims
    • Includes 3-5/8"stock Ford yoke.

    910-48340 Instructions (PDF)

    Third members are made to order. Please allow 24-48 hours for order to ship.

    Available options include a yoke to accept 3 1/4" Chevy/GM U-joint (add 91048339) or lightening of the ring gear to remove weight (add 91600013; ratios 4.78, 5.25, 5.37, 5.50, 5.57, 6.14, 6.66, 6.83, 7.00, 7.16, and 7.33 are already lightened). The letter "l" behind a ratio also indicates the availability of a lightened ratio.

  • Garage Sale - Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    Garage Sale
    Garage Sale - Double Steering U-Joint, .620 Inch-36 Spline to 3/4 Inch Round, Chrysler
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

    This is garage sale priced because it is missing two screws.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS