Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"45 degree hose fittings" Page 1 of 4

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 45 Degree
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 45 Degree
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. 45° elbow -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Aeroquip FBM4225 Starlite Crimp Fitting, 45 Degree, -12 AN
    Aeroquip FBM4225 Starlite Crimp Fitting, 45 Degree, -12 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4224 Starlite Crimp Fitting, 45 Degree, -10 AN
    Aeroquip FBM4224 Starlite Crimp Fitting, 45 Degree, -10 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4222 Starlite Crimp Fitting, 45 Degree, -6 AN
    Aeroquip FBM4222 Starlite Crimp Fitting, 45 Degree, -6 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4226 Starlite Crimp Fitting, 45 Degree, -16 AN
    Aeroquip FBM4226 Starlite Crimp Fitting, 45 Degree, -16 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    Aeroquip FBM4121 Starlite Crimp Fitting, 45 Degree, -4 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4223 Starlite Crimp Fitting, 45 Degree, -8 AN
    Aeroquip FBM4223 Starlite Crimp Fitting, 45 Degree, -8 AN
    x
                Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. 

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE4022 Nickel 45 Degree Hose End Coupler Fitting, -6 AN
    Aeroquip FCE4022 Nickel 45 Degree Hose End Coupler Fitting, -6 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Fragola 684508-BL Real-Street 45 Degree PTFE Hose End Fitting, -8 AN, Black
    New
    Fragola 684508-BL Real-Street 45 Degree PTFE Hose End Fitting, -8 AN, Black
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -8 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Fragola 684510-BL Real-Street 45 Degree PTFE Hose End Fitting, -10 AN, Black
    New
    Fragola 684510-BL Real-Street 45 Degree PTFE Hose End Fitting, -10 AN, Black
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -10 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    Aeroquip FCE4023 Nickel 45 Degree Hose End Coupler Fitting, -8 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    New
    Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -6 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Nickel, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Nickel, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then given a nickel finish to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a corrosion resistant nickel finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN female to push-on adapter
    • 45 degree angle fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Aeroquip FBM1023 45 Degree Hose End Coupler Fitting, Red/Blue, -8 AN
    Aeroquip FBM1023 45 Degree Hose End Coupler Fitting, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    45° Full Flow Ends come in sizes of AN4,AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM1022 45 Degree Hose End Coupler Fitting, Red/Blue, -6 AN
    Aeroquip FBM1022 45 Degree Hose End Coupler Fitting, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    45° Full Flow Ends come in sizes of AN4,AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    Aeroquip FBU1000 Starlite Hose, -10 AN, 9/16 Inch
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    • -10 AN - 9/16"
    • Up to 45% lighter than stainless steel braided hose
    • Working temperature is -45 Degree F to +300 Degree F
    • Can be used with either crimp style or reusable hose fittings

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN female to push-on adapter
    • 45 degree angle fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -6 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -6 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Black, -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree Angle, Red/Blue, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Black Anodized, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
    x
                

    These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

    • AN to hose barb 
    • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
    • Use with Aeroquip Special Application blue hose
    • For use with 37° AN style fittings

    Socketless Fitting Application Chart (GIF)

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Aeroquip FBM4233 Starlite Crimp Fitting, 90 Degree, -8 AN
    Aeroquip FBM4233 Starlite Crimp Fitting, 90 Degree, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Black 45 Degree Socketless Push-On Hose End, -6 AN
    Black 45 Degree Socketless Push-On Hose End, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Black 45 Degree Socketless Push-On Hose End, -12 AN
    Black 45 Degree Socketless Push-On Hose End, -12 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Black 45 Degree Socketless Push-On Hose End, -10 AN
    Black 45 Degree Socketless Push-On Hose End, -10 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Black 45 Degree Socketless Push-On Hose End, -8 AN
    Black 45 Degree Socketless Push-On Hose End, -8 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    Aeroquip FBM4243 Starlite Crimp Fitting, 120 Degree, -8 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4