Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"400 small block engine" Page 1 of 14

  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • ARP Fasteners 534-9501 Small Block Chevy Engine Fastener Kit
    ARP Fasteners 534-9501 Small Block Chevy Engine Fastener Kit
    x
                

    It’s easy to assemble a show-quality engine when you use ARP’s handy Engine & Accessory Fastener Kit. Virtually everything you need comes completely organized in one convenient package. More importantly, each and every fastener is superior in strength to the OEM bolts, and also significantly better than hardware grades (even Grade 8).

    Plus, these fasteners are made of a specially alloyed Stainless 300 material, which has the added benefit of being virtually impervious to rust and corrosion. The stainless steel is polished to achieve a brilliant luster, and provides a distinctive, maintenance-free environment. Each kit has a dozen different type fasteners, all neatly organized and labeled in protective vacuum-wrapped packages. 

    • 12 point heads
    • Polished stainless steel 300 material
    • 170,000 psi tensile strength

    Fits 1955-1986 265-400 c.i. Small Block Chevy (1987 & newer EFI engines may require additional fasteners). 

  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    KRC KRC40400360 Adjustable Idler/Tensioner Assembly, Small Block Chevy
    x
                

    KRC's adjustable idler - tensioner is used to keep proper belt tension and prevent belt slippage when using a mechanical fan. This can occur on both single drive belt and pulley systems that have a steering pump mounted of the front of an engine.

    KRC's idler tensioner is essential on dirt cars. Belt slippage can occur on cars that exceed 7,000 RPM and/or use a large or heavy fixed fan blade or a fan blade with a lot of pitch, which potentially causes overheating & pulleys to wear faster. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine. 

    Fan belts and pulleys work to slow down the fan. The belt slips because it is stretching to slow the fan. The belt heats up as the the the stretching increases. The only way to properly tension the belt is with an adjustable idler/tensioner. This keeps the engine running cooler because the belt is tighter. This will allow faster acceleration out of turns and harder braking on corners.

    • Designed for GM 602 & 604 Crate Engines
    • Use with KRC serpentine drive systems
    • Assembly contains:
      • Idler - Tensioner
      • Hardware and Instructions

     

     

  • Tru-Gear Small Block Chevy Noisy Gear Drive
    Tru-Gear Small Block Chevy Noisy Gear Drive
    x
                

    Replace your timing chain with a Speedway Tru-Gear gear drive. Unlike timing chains, a gear drive doesn't stretch, so your cam timing stays more accurate. We builds these drives with dual idler gears, making them more stable than single idler gear drives. A Tru Gear gear drive is as easy to install as a timing chain and will fit under your stock timing chain cover. Noisy gears give your engine a "supercharged" sound. 

    For use on Chevrolet Small Block engines 1957–1995 262-400 c.i. all without “FACTORY” hydraulic roller camshaft.

    453-3271N Instuctions (PDF)

  • Standard Chevy Engine Mid Plate - 5/8 Inch Offset
    Standard Chevy Engine Mid Plate - 5/8 Inch Offset
    x
                

    Standard chevy engine mid plate. Standard. Fits new Shaw & Bullitt Late Models, also fits Harris, Dirtworks, Speedway, and other popular IMCA modifieds. 5/8" offset. Aluminum.

    Note:   * Fits '97 and older Harris chassis. Harris made a mid year change in 1997.   Please verify your measurements before ordering.

  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Moroso 62190 11 Inch Degree Wheel
    Moroso 62190 11 Inch Degree Wheel
    x
                

    11" diameter. Heavy gauge aluminum discs calibrated in 1° increments for determining precise valve, cam and ignition timing. 11" degree wheel works with crank socket.

    • These degree wheels are mandatory for professional engine builders
    • Accurately measures several timing functions of an engine: camshaft centerline, valve timing, TDC, BDC, etc.
    • Marked in easy-to-read one degree increments
    • Made from heavy gauge metal with a silk screen finish for long-lasting use
    • Adapter included to fit virtually any engine
    • For mounting either wheel, use Crankshaft Socket Nos. 61755 or No. 61756 for Small and Big Block Chevys, and No. 61757 for LS Series Engines with keyway

     

  • Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    Ford Racing M-6880-A50 90 Degree Oil Filter Adapter
    x
                

    There are times you just don't have room for the oil filter on your Ford powered toy. This adapter attaches where the oil filter mounts and turns the filter 90 degrees. Rotate filter toward front of engine to provide clearance for engine swaps and chassis modifications.

    Fits most Ford V8 and some 4 cyl. engines that use Fram PH8A/HP1 or Motorcraft FL-1A oil filters. 

  • AFCO 80652 Chevy Engine Mounts, Rear
    AFCO 80652 Chevy Engine Mounts, Rear
    x
                AFCO Rear Chevy Engine Mounts
            
  • Heat Treated Valve Locks, 11/32 Inch, Set of 32
    Heat Treated Valve Locks, 11/32 Inch, Set of 32
    x
                

    These race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, these valve locks will provide the reliability that you've been looking for.

    Heat Treated Valve Locks

    • High Quality & Heat Treated
    • High strength, premium, heavy duty
    • Machined from high quality steel
    • Valve stem diameter: 0.342 in.
    • 1-groove
    • 11/32", 7 Degree
    • Set of 32
  • Replacement Pilot Bushing, Chevy Engine to Ford Trans
    Replacement Pilot Bushing, Chevy Engine to Ford Trans
    x
                

    Replacement pilot bushing for use with adapter 720-0392 for Chevy V8/V6 engines to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmissions.

    • Adapts Ford transmission to Chevy crankshaft
    • 1.093" O.D.
    • .671" I.D.
    • 1.45" long
  • Clevite P-Series 1969-Up Small Block Chevy Rod Bearings
    Clevite P-Series 1969-Up Small Block Chevy Rod Bearings
    x
                

    Not to be confused with standard "passenger" car bearings, Clevite's P-Series is their oldest line of premium high performance bearings. These sets are specifically for 400 c.i. S/B Chevy V-8 engines (1970-1980).

    • Use P-Series rod bearings where extremely high RPM’s cause severe rod bore close-in.
    • Large Journal
    • Use P-Series main bearings where higher eccentricity is desired to narrow bearing contact patterns and to provide increased oiling to rod bearings.

    P-Series Features (Link)

  • King HP Series 1969-Up Small Block Chevy Rod Bearings
    King HP Series 1969-Up Small Block Chevy Rod Bearings
    x
                
    • Bi-metal aluminum silicon alloy featuring fine micro-bore finish
    • Mains and rods are narrowed for large radius crankshafts
    • Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
    • 0.015" thick top layer for superior macro particle embedability and conformability
    • 40 Vickers hardness to resist overlay migration and extrusion
    • 450°F heat threshold for superior protection against friction and overheating
  • 6 3/4 Inch Chevy Harmonic Balancer Covers
    6 3/4 Inch Chevy Harmonic Balancer Covers
    x
                6.75" Harmonic balancer covers for Small Block Chevys. Available blue, black, red, chrome or billet. 
            
  • Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    x
                Please view the product's page for more information
            
  • King XP Series 1969-Up Small Block Chevy Rod Bearings
    King XP Series 1969-Up Small Block Chevy Rod Bearings
    x
                
    • Enhanced tri-metal copper lead construction with nickel barrier and SecureBond adhesion 
    • Unique SecureBond adhesion process for superior stability between the top and intermediate layers
    • 15% - 30% greater load capacity than traditional bearings
    • Mains and rods are narrowed for large radius crankshafts
    • Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
    • 0.0005" metallurgically enhanced and hardened performance overlay withstands greater loads and better resists surface fatigue
    • Mains are 1/2 grooved for uncompromised lower shell load capacity
  • Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    Flo-Tek 203505 Small Block Ford Aluminum Engine Heads
    x
                

    You don't need to spend a fortune to get a set of top-performing, lightweight aluminum cylinder heads for your small-block Ford V8. These Flo-Tek heads have a long list of high-end features, minus the hefty price tag. Sold as complete assemblies only.

    • 180cc intake runners
    • 62cc exhaust runners
    • 1.94" intake and 1.54" swirl-polished exhaust valves
    • 58cc chambers
    • Performance valve springs (.550 lift)
    • 115 lbs. spring seat pressure
    • Compatible with most flat tappet camshafts
    • Hardened locks and retainers
    • PC seals
    • High-temp exhaust seats
    • Multi angle valve job
    • Bronze guides
    • 3/8" rocker studs and guide plates

    See how these Flo-Tek heads stack up against the competition in Car Craft Magazine's tech article; 6 Small Block Ford Cylinder Heads That Work.

    Head Flow Specs:

    Lift        Intake        Exhaust
    .400      209          137
    .500      223          161
    .600      248          191

  • Pushrod Length Checker, 7.5-8.7 Inches
    Pushrod Length Checker, 7.5-8.7 Inches
    x
                

    You always need to find the correct length for your push rods when you build an engine. Having the wrong length changes the geometry of the valve train and decreases horsepower while increasing wear.

    • Adjustable to fit several engines
    • Enables you to arrive at correct pushrod length and correct valve train geometry
    • Minimum length is 7.5" and maximum length is 8.7"
    • Includes two per package (check both intake and exhaust)
    • 5/16" diameter
  • ACL H-Series Rod Bearings Small Block Chevy Large Journal
    ACL H-Series Rod Bearings Small Block Chevy Large Journal
    x
                ACL H-Series Duraglide bearings feature a tri-metal design. Fits S/B Chevy 350/400 with Large Journal crankshafts (2.100").
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.
  • Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. These sets are  specifically for 1969-Up 302-305-327-350 S/B Chevy "Large Journal" engine (with 2.100" rod  journals).
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

    H-Series Features (Link)
  • ACL 5M1038H H-Series Main Bearings Small Block Chevy 400
    ACL 5M1038H H-Series Main Bearings Small Block Chevy 400
    x
                

    ACL H-Series Duraglide tri-metal main bearings for S/B Chevy 400 c.i. V-8.

    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

     

  • Edelbrock 7116 Performer RPM Vortec Intake Manifold, S/B Chevy V8
    Edelbrock 7116 Performer RPM Vortec Intake Manifold, S/B Chevy V8
    x
                

    These Performer RPM intake manifolds are dual-plane, high-rise intakes with 180° firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not recommended for emissions equipped engines.

    Based on the highly successful and powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads.

    • Chevrolet 262-400 Small-Block V8
    • PERFORMER RPM VORTEC (1500-6500 rpm)
    • An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines
    • Manifold accepts square-bore carbs only
    • For street and marine engines operating from 1500-6500 rpm
    • Will not fit under stock Corvette hood
    • Available with standard finish

    325-7116 Instructions (PDF) 

  • 1955-1994 Small Block Chevy Engine Mount
    1955-1994 Small Block Chevy Engine Mount
    x
                

    Specially designed engine mount cradle to mount your 1955-1994 Chevy 265-400 small block into almost any chassis. Includes grade 5 mounting hardware. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Illustration (GIF)

    135-6023 Instructions (PDF)

  • Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened copper wire
    • Nominal compression thickness: .039"
    • Compressed volume: 8.9 cc
    • Recommended for '86-'91 Corvette aluminum heads. Max 4.155" bore.
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    x
                

    Based on the powerful Performer RPM Vortec #7116, single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads.The RPM Air-Gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood. Available with EnduraShine finish.

  • Clevite Engine Parts SH-1349S-STD H-Series S/B Chevy Cam Bearings
    Clevite Engine Parts SH-1349S-STD H-Series S/B Chevy Cam Bearings
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. 
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

    H-Series Features (Link)

  • Clevite H-Series Small Block Chevy Main Bearings
    Clevite H-Series Small Block Chevy Main Bearings
    x
                

    Clevite's H-Series was developed primarily for use in NASCAR type racing, but they are suitable for all types of competition engines. These sets are specifically for 1969-Up 302-305-327-350 S/B Chevy.

    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

    H-Series Features (Link)

  • McLeod 8653 Explosion-Proof GM Bellhousing
    McLeod 8653 Explosion-Proof GM Bellhousing
    x
                

    Explosion proof bellhousing for Chevy, Olds, Buick and Pontiac. Dual starter pockets, places starter either side of engine. Works with standard mechanical linkage, cable linkage or hydraulic linkage.

    • Required by IMCA
    • Not SFI rated
    • Accepts Saginaw, Muncie, T-10, T-50, and T-5 trans w/ 17 degree rotated pattern

    Bellhousing will fit Chevy V8 (1962-1992), some Chevy V6 (1962-1992), Oldsmobile and Pontiac V8 (1964-1992), and Buick V8 (1967-1980).

    Hole in center will not fit some Saginaw transmissions out of trucks which have a larger nose flange. You'll need a different flange or machine your current one.

  • Clevite P-Series 1969-Up Small Block Chevy Main Bearings
    Clevite P-Series 1969-Up Small Block Chevy Main Bearings
    x
                

    Not to be confused with standard "passenger" car bearings, Clevite's P-Series is their oldest line of premium high performance bearings. These sets are specifically for 302-305-327-350 S/B Chevy "Large Journal" engines built from 1969-Up (with 2.100" rod journal).

    • Use P-Series rod bearings where extremely high RPM’s cause severe rod bore close-in.
    • Use P-Series main bearings where higher eccentricity is desired to narrow bearing contact patterns and to provide increased oiling to rod bearings.

    Note: Will not work with 400 c.i. V-8.

    P-Series Features (Link)

    Clevite Application Chart

  • AC Delco PF1218 Duraguard Engine Oil Filter, Chevy
    AC Delco PF1218 Duraguard Engine Oil Filter, Chevy
    x
                Protect your Chevy V8 engine with this premium quality oil filter. Outstanding filter capacity, enhanced efficiency, consistent flow management and high-durability design help provide exceptional filtering performance. 
    • 98% single-pass efficiency at 25-30 microns
    • Patented cellulose media traps particles 1/3 the width of a human hair
    • Designed with 5x greater burst strength than most engine oil operating pressures
  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • 1955-1985 Chevy Flexplate for 2-Piece Rear Main, 153 Tooth
    1955-1985 Chevy Flexplate for 2-Piece Rear Main, 153 Tooth
    x
                

    These non-SFI rated S/B Chevy automatic transmission flexplates are suggested whenever installing a new engine or transmission. These flexplates are for two-piece rear main seal engines ONLY.

    • (Internal balance, 153-tooth)
      • Dual bolt patterns, 9-3/4" and 10-3/4"
      • Flexplate O.D. 12-3/4"
      • Center Hole 2-1/2"

    Make sure you choose the correct flywheel for your application by reading our tech article. Small Block Chevy - How to Choose a Flexplate.

  • King HP Series Chevy 400 Main Bearings
    $54.99
    $84.40
    King HP Series Chevy 400 Main Bearings
    x
                
    • Bi-metal aluminum silicon alloy featuring fine micro-bore finish
    • Mains and rods are narrowed for large radius crankshafts
    • Mains are 3/4 grooved for improved oiling to the rod journals
    • Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
    • 0.015" thick top layer for superior macro particle embedability and conformability
    • 40 Vickers hardness to resist overlay migration and extrusion
    • 450°F heat threshold for superior protection against friction and overheating
  • Edelbrock 7101 Performer RPM Intake Manifold, Plain Aluminum Finish
    Edelbrock 7101 Performer RPM Intake Manifold, Plain Aluminum Finish
    x
                

    These Performer RPM intake manifolds are dual-plane, high-rise intakes with 180° firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not recommended for emissions equipped engines.

    • Chevrolet 262-400 Small-Block V8
    • PERFORMER RPM (1500-6500 rpm)
    • Designed for 1955-86 262-400 c.i.d. Chevy V8s for maximum power and a broad torque curve for high-performance street/marine
    • Provides power like a single-plane and throttle response like a dual-plane
    • Has provisions to add oil fill tube
    • No provisions for exhaust heated or stock-style choke
    • Accepts late-model waterneck, air-conditioning, alternator and H.E.I.
    • Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    3257101 Power Graph (Link)

    325-7101 Instructions (PDF) 

  • King XP Series Chevy 400 Main Bearings
    $54.99
    $84.40
    King XP Series Chevy 400 Main Bearings
    x
                
    • Enhanced tri-metal copper lead construction with nickel barrier and SecureBond adhesion 
    • Unique SecureBond adhesion process for superior stability between the top and intermediate layers
    • 15% - 30% greater load capacity than traditional bearings
    • Mains and rods are narrowed for large radius crankshafts
    • Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
    • 0.0005" metallurgically enhanced and hardened performance overlay withstands greater loads and better resists surface fatigue
    • Mains are 1/2 grooved for uncompromised lower shell load capacity
  • Edelbrock 2701 Performer EPS Chevy Intake Manifold
    Edelbrock 2701 Performer EPS Chevy Intake Manifold
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    IMCA racing approved.

    325-2701 Instructions (PDF)

  • Small Block Chevy Engine Mount Kit
    $74.99
    $79.99
    Small Block Chevy Engine Mount Kit
    x
                These complete engine conversion mount kits are perfect for that custom hot rod.  They are designed to work with almost any fame that is up to 39" wide.  They feature heavy duty tubing with quality welds sure to hold up to all that SBC horsepower.  Kits include 3-bolt rubber motor mounts and crossmember with ends for either bolt-in or weld-in applications.
    • Crossmember mounts a Chevy engine in almost any frame up to 39" wide
    • Heavy wall 1-3/4" tubing, MIG welded
    • Comes with ends for bolt-in or weld-in applications
    • 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications
    • Unique rubber formula provides good abrasion resistance and aging stability
Goto Previous PagePrevious Page
1 2 3 4 5 ... 14