Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"3 8 fuel line hose" Page 1 of 3

  • Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    x
                

    These chrome plated push-on brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 3/8" NPT adapter
    • Fuel line hose connector
    • Straight angle
  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • 6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • 3-3/4" tall from the base to the highest point on the top.
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

     

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    x
                

    These chrome plated brass adapter fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" push-on hose to 3/8" NPT fuel line connector
    • 90 Degree angle
  • Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adapters connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -6 AN to 3/8" aluminum pipe adapter
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb end
    • 3/8" Hose to 1/4" NPT adapter
    • Straight angle line connector

     

  • Insulated Brake Line Tube Clamps, Bag/10
    Insulated Brake Line Tube Clamps, Bag/10
    x
                

    You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

    10 clamps per package.

  • Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    x
                This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.
            
  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/4" NPT
    • 90 Degree angle
  • Black Straight -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black Straight -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adapters connect 3/8" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -8 AN male to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Fragola        Series 6000 P.T.F.E. Lined Hose, -8 AN, 3 FT Roll, Black
    New
    Fragola Series 6000 P.T.F.E. Lined Hose, -8 AN, 3 FT Roll, Black
    x
                Please view the product's page for more information
            
  • Professional Products 10102 Street Rod Fuel Filter
    Professional Products 10102 Street Rod Fuel Filter
    x
                

    This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

    For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

    910-11770 Instructions (PDF) 

  • Straight Chrome Fitting, 3/8 Inch Hose to 1/8 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/8 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/8" NPT
    • Straight angle
  • Mr Gasket 1575 Demon Carb Chrome Dual-Feed Fuel Line
    Mr Gasket 1575 Demon Carb Chrome Dual-Feed Fuel Line
    x
                

    This chrome fuel line kit fits Race Demon, Speed Demon, & Road Demon carburetors. Mandrel bent 3/8" dual feed fuel line allows maximum fuel flow with minimal restriction. The chrome plated finish adds a special touch for custom or race applications.

    • Engineered for competition use
    • Eliminate fittings and adapters, with 3/8" hose barb
    • Center to center:  9-5/8"
    • Hose outlet nipple:  3/8"
    • Includes 9/16"-24 male and 5/8"-18 IFF carb fittings
    • Crush washers included
    • Fits Demon carburetors
  • Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Red See-Through Fuel Line, 3/8 Inch I.D. x 6 Ft.
    Red See-Through Fuel Line, 3/8 Inch I.D. x 6 Ft.
    x
                Speedway Red See-Through Fuel Line is the perfect old-time accent to your multi-carb street rod! This specially-formulated, flexible tubing has a 3/8" inside diameter and comes in 6 foot lengths. You can easily trim it to your needs. Works with normal slip-on hose barb fittings and clamps.
            
  • 6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb, 2-5/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb, 2-5/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 2 barrel carbs with 2-5/8" neck
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

    Does not fit 1968 and later cars equipped with factory air temperature control valve.

  • Hilborn Fuel Injection Hose Line, Set/8
    From: $124.99
    Hilborn Fuel Injection Hose Line, Set/8
    x
                

    Hilborn fuel injection 3/16" I.D. hose line available for for down nozzle heads or for standard up nozzle heads. Up nozzles have 1/2" tip. Down nozzles have 1" tip.

    Injector line set 385-H3C8A-STR comes with:

    • (2) 8" lines
    • (2) 8.5" lines
    • (2) 9.8" lines
    • (2) 10.3" lines

    Injector line set 385-H3C8A-90 comes with:

    • (8) 11.5" lines
  • Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting
    Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN adapter fitting. Black anodized finish will give your engine compartment the look you are after.

    • 90 degree elbow
    • -3 AN flare to 1/8" NPT thread
    • Fuel line hose connector

    Fitting Thread Application Chart (GIF)

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 1/8 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/8 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/8" NPT
    • 90 Degree angle
  • Offenhauser Chrome Universal Adjustable Fuel Pressure Regulator, 1-6 PSI
    Offenhauser Chrome Universal Adjustable Fuel Pressure Regulator, 1-6 PSI
    x
                This Offenhauser chrome universal fuel regulator is adjustable from 1-6 PSI, making it an affordable option for a variety of low pressure carbureted applications. Fuel pump regulator has 1/8" NPT female threads and includes both 5/16" and 3/8" hose barb connectors.
            
  • Holley 4160 Chrome Dual Feed Carburetor Fuel Line
    Holley 4160 Chrome Dual Feed Carburetor Fuel Line
    x
                

    Eliminate ugly fittings and adaptors with this chrome dual feed fuel line with mandrel bends and 3/8" hose barb providing excellent fuel flow. Fuel log fits Holley 4160-style vaccuum secondary (side hung float bowl) 4-BBL carburetors with 8-21/32" centers.

    These fuel lines have .612 or 5/8” x 18 IFM  carburetor fittings and go into the factory brass fitting. 

  • MSD 2225 In-Line Hi-Pressure Fuel Pump
    MSD 2225 In-Line Hi-Pressure Fuel Pump
    x
                

    Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.

    • Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps 
    • Supports most multiport EFI systems up to 500 horsepower
    • Mounts in-line (out of the fuel tank)
    • Roller vane pump mechanism is extremely resistant to clogging and jamming
    • Has 3/8” hose barb inlet and 5/16" hose barb outlet
    • Made in the USA
  • Aluminum Fuel Manifold Fitting
    Aluminum Fuel Manifold Fitting
    x
                          This handy little aluminum fuel manifold fitting allows you to plumb all your return lines right at the injector. That saves you weight and space because you don't have to run all the lines back to the tank. Choose AN8 or AN10 to lead to three AN6 male ends.            
            
  • Black Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 3.00 Stars
    Black Push-On Hose, -8 AN
    x
                

    AN8 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the hig end of the parameter, hose clamps shoudl be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 3/8" braided hose (fuel line).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Three Outlet T-Style Chrome Fuel Block
    Three Outlet T-Style Chrome Fuel Block
    x
                

    Speedway fuel blocks provide even fuel distribution for proper fuel flow to multi-carb set-ups. This precision die cast and chrome plated fuel distribution block is designed for three carburetor applications. Fuel log has a single 3/8" NPT fuel inlet with three 1/4" NPT outlets. T-block mounts to your firewall with screws.

    Don't forget to order the suggested hose barb fittings to complete your set-up! For a positive seal, use thread sealing tape on the threads.

  • Chrome Fuel Filter for 3/8 Inch Hose
    Chrome Fuel Filter for 3/8 Inch Hose
    x
                

    Compact, chrome steel fuel filter. Can be unassembled for easy cleaning. Features a sintered metal filter.

    Not for use with fuel injection.

  • Holley 4150 Double Pumper Chrome Dual-Feed Fuel Line
    Holley 4150 Double Pumper Chrome Dual-Feed Fuel Line
    x
                Eliminate ugly fittings and adaptors with this  chrome dual feed line with mandrel bends and  3/8" hose barb inlet  providing excellent fuel flow. Fuel log fits Holley 4150-style  mechanical secondary Double Pumper (center hung float bowl) 4-BBL  carburetors with 9-1/4" centers. 

     

  • Billet Specialties 67225 Polished Aluminum 3/8 Inch Hose End Cover
    Billet Specialties 67225 Polished Aluminum 3/8 Inch Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 3/8" rubber hose (fuel line).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Offenhauser 1081 3-Hole Fuel Block
    Offenhauser 1081 3-Hole Fuel Block
    x
                This Offy fuel distribution block has 3 large 3/8" NPT outlets, which equalizes fuel flow to any multiple carburetor application using an Offenhauser intake manifold. Fuel log also has a 3/8" NPT tapped hole on each end. Fuel block features a polished aluminum finish with four mounting screw holes to easily mount the unit to your firewall.
    • Three 3/8" NPT ports facing forward
    • One 3/8" NPT port on each end

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Blue Push-On Hose, -8 AN
    From: $10.99
    Product Rating: 5.00 Stars
    Blue Push-On Hose, -8 AN
    x
                
    • Blue push-on hose available in AN6, 8, 10 and 12 sizes
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Dual Quad Fuel Line for Edelbrock Carbs
    Dual Quad Fuel Line for Edelbrock Carbs
    x
                

    This fuel line is intended to connect two Edelbrock (or Carter) four-barrel carbs on a low-rise 2x4 intake. The inlet fitting thread is 3/8" NPT female, and there is a 1/8" NPT hole that can be used for a fuel pressure gauge. The outlets on this adjustable fuel log can be as close together as 6-1/2" and as far apart as 8-1/4". All of this carburetor fuel line is anodized blue, except for the central piece of braided stainless steel hose.

  • Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 3" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also comes with mounting hardware and PVC smog fitting adapter.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

Goto Previous PagePrevious Page
1 2 3