Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"3 8 aluminum fuel line" Page 1 of 5

  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.67 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black Straight -6 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adapters connect 3/8" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -6 AN to 3/8" aluminum pipe adapter
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Aluminum Fuel Manifold Fitting
    Aluminum Fuel Manifold Fitting
    x
                          This handy little aluminum fuel manifold fitting allows you to plumb all your return lines right at the injector. That saves you weight and space because you don't have to run all the lines back to the tank. Choose AN8 or AN10 to lead to three AN6 male ends.            
            
  • Black Straight -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black Straight -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adapters connect 3/8" pipe to straight -8 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -8 AN male to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
  • Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Speedway Aluminum Fuel Log for Holley Carburetor
    Speedway Aluminum Fuel Log for Holley Carburetor
    x
                

    This fuel log ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied, and not before. Must use return fuel line to take full advantage of benefits.

    Features -8 AN inlet and two -8 AN outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Carburetor fuel line also has 1/8" NPT outlet for fuel pressure gauge (fittings sold separately). 

    • 9-1/4" from fitting to fitting
    • Standard Holley spacing is 9-1/4"
  • LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    x
                
    • Direct replacement for OEM fuel rail and return line fittings in late-model EFI pressure side application
    • Exclusive SAE quick disconnect threaded aluminum retaining cap for ease of installation and positive engagement under high pressure
    • 37° sealing angle provides a positive seal at maximum operating pressures
    • Black anodized finish
  • Standard Tube Flaring Tool, 37 Degree AN
    Standard Tube Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    x
                

    These vintage style brushed aluminum gas tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.

    • Has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom
    • Mounting brackets sold separately
    • Brushed aluminum finish 
    • 3-1/2 gallon, 16" x 8"
  • Speedway Polished Aluminum Fuel Block
    Speedway Polished Aluminum Fuel Block
    x
                

    This fuel distribution block has 3 large 3/8" NPT outlets, which equalizes fuel flow to any multiple carburetor application. Fuel log also has a 3/8" NPT tapped hole on each end. Fuel block features a polished aluminum finish with four mounting screw holes to easily mount the unit to your firewall.

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Professional Products 10102 Street Rod Fuel Filter
    Professional Products 10102 Street Rod Fuel Filter
    x
                

    This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

    For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

    910-11770 Instructions (PDF) 

  • Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    Billet Specialties 67325 3/8 Inch Braided Hose Aluminum Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 3/8" braided hose (fuel line).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Professional Products 10215 Polished Aluminum Fuel Filter with Mount
    Professional Products 10215 Polished Aluminum Fuel Filter with Mount
    x
                Highly polished aluminum filter complete with a 10 micron reusable stainless steel filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused. 
    • 3" long x 2" diameter
    • Flows 160 gallons per hour at 7 psi
    • 3/8" NPT female thread inlet/outlet
  • Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -6 AN to 3/8 Inch NPT
    Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -6 AN to 3/8 Inch NPT
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These straight flare adaptors connect 3/8" pipe to straight -6 AN fittings. They are lightweight and feature a 37° sealing angle. 

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum connector fitting
    • -6 AN to 3/8" aluminum pipe adapter
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in nickel plated finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Billet Specialties 67225 Polished Aluminum 3/8 Inch Hose End Cover
    Billet Specialties 67225 Polished Aluminum 3/8 Inch Hose End Cover
    x
                

    Billet Specialties has the answer for unsightly hose clamps and loud anodized colors - polished billet hose ends! For use with 3/8" rubber hose (fuel line).

    • Precision machined from 6061-T6 billet aluminum
    • Mirror polish finish
    • Hose clamp included
    • Sold individually
  • Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    Single Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    Dual Banjo Style Fuel Fitting, 3/8 Inch Hose
    x
                

    The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 3/8" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.

    Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.

    Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.

    These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.

    • Makes a perfect job when using rubber or plastic hose
    • Great fitting to use when space is limited
    • Fuel line is held tight to carb sides for maximum linkage clearance
    • Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
    • 32 micron polished finish

     

  • Aluminum 1/8 Inch NPT Hose Barb Fitting
    Aluminum 1/8 Inch NPT Hose Barb Fitting
    x
                Use this billet aluminum hose barb fitting in place of the ugly old brass fittings.  These aluminum fittings accept 5/16" or 3/8" I.D. hose (must be clamped) and thread into 1/8" NPT.
            
  • Professional Products 10211 Polished Aluminum Inline Fuel Filter
    Professional Products 10211 Polished Aluminum Inline Fuel Filter
    x
                Highly polished aluminum filter complete with reusable 35 micron stainless steel mesh filter element. Intended for carbureted systems with 8 PSI max pressure. Filter elements can be cleaned in solvent and reused. 
    • Designed for low pressure, carbureted systems 
    • Flows 160 gallons per hour at 7 psi
    • 3/8" NPT female threads
  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Paper elements are for use with gasoline fuel only. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 10" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • Hex Plain Aluminum Fuel Block, 2-Hole
    Hex Plain Aluminum Fuel Block, 2-Hole
    x
                

    Speedway fuel blocks provide even fuel distribution for proper fuel flow to multi-carb set-ups. This 1950's style six-sided plain aluminum fuel distribution block is designed for two-carb applications. Fuel log is 3" long and has a single 1/4" NPT pipe inlet fitting. Outlets for carburetor fittings are 1/8" NPT threaded ports.

    • Even fuel distribution for proper fuel flow to multi-carb set-ups
    • 1950's style six-sided
    • Plain aluminum
    • Designed for two-carb applications
    • 3" long
    • Single 1/4" NPT pipe inlet
    • 1/8" NPT outlets

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Stainless, 10 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Stainless, 10 Inch
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Washable and reusable 45 micron stainless steel element for use with both alcohol and gasoline. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 10" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • Offenhauser 1081 3-Hole Fuel Block
    Offenhauser 1081 3-Hole Fuel Block
    x
                This Offy fuel distribution block has 3 large 3/8" NPT outlets, which equalizes fuel flow to any multiple carburetor application using an Offenhauser intake manifold. Fuel log also has a 3/8" NPT tapped hole on each end. Fuel block features a polished aluminum finish with four mounting screw holes to easily mount the unit to your firewall.
    • Three 3/8" NPT ports facing forward
    • One 3/8" NPT port on each end

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Deluxe Flaring Tool, 37 Degree AN
    Deluxe Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Stainless, 6 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Stainless, 6 Inch
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Washable and reusable 45 micron stainless steel element for use with both alcohol and gasoline. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 6" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • Russell Performance 639200 3/8 Inch Tubing - AN 6 Female Flare Adapter
    Russell Performance 639200 3/8 Inch Tubing - AN 6 Female Flare Adapter
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -8 AN to 3/8 Inch NPT
    Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -8 AN to 3/8 Inch NPT
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These straight flare adaptors connect 3/8" pipe to straight -8 AN fittings. They are lightweight and feature a 37° sealing angle. 

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -8 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in nickel plated finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Hex Polished Aluminum Fuel Block, 3-Hole
    Hex Polished Aluminum Fuel Block, 3-Hole
    x
                

    Speedway fuel blocks provide even fuel distribution for proper fuel flow to multi-carb set-ups. This 1950's style six-sided polished aluminum fuel distribution block is designed for three-carb applications. Fuel log is 4" long and has a single 1/4" NPT pipe inlet fittng. Outlets for carburetor fittings are 1/8" NPT threaded ports.

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Three Chrome 9 Super 7   Carbs to 4 Barrel Intake Adapter, Complete Kit
    Three Chrome 9 Super 7 Carbs to 4 Barrel Intake Adapter, Complete Kit
    x
                Please view the product's page for more information
            
  • Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Round Polished Aluminum Fuel Block, 3-Hole
    Round Polished Aluminum Fuel Block, 3-Hole
    x
                

    Speedway fuel blocks provide even fuel distribution for proper fuel flow to multi-carb set-ups. This polished aluminum fuel distribution block is designed for three-carb applications. Fuel log is 1-1/4" O.D. x 4" long and has a single 1/4" NPT pipe inlet fittng. Outlets for carburetor fittings are 1/8" NPT threaded ports.

    Don't forget to order the suggested hose barb fittings to complete your set-up!

  • Three Plain 9 Super 7   Carbs to 4 Barrel Intake Adapter, Complete Kit
    Three Plain 9 Super 7 Carbs to 4 Barrel Intake Adapter, Complete Kit
    x
                Please view the product's page for more information
            
  • Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -10 AN to 3/8 Inch NPT
    Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -10 AN to 3/8 Inch NPT
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These straight flare adaptors connect 3/8" pipe to straight -10 AN fittings. They are lightweight and feature a 37° sealing angle. 

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN to 3/8" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in nickel plated finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Bilstein 30/60 Aluminum Threaded Gas Shock-9 Inch Stroke, Comp 6/Reb 3
    Bilstein 30/60 Aluminum Threaded Gas Shock-9 Inch Stroke, Comp 6/Reb 3
    x
                
    • 46mm (1.81") diameter threaded aluminum body
    • Includes Schrader valve and circlip rod guide
    • Rebuildable; shock can be assembled and disassembled for rapid repair or valving change
    • Hard anodized for durability
    • Valve stacks and valving kits available separately
    • Available with linear or digressive piston
    • Every part of the ASN shock is available separately for economical repair
    • World class performance in an aluminum shock at an economy price
    • Bilstein's famous consistent, fade-free performance
    • Designed for, but not limited to Modifieds, Late Models, & Sprint Cars

    Note: With mono-tube gas shocks, you have a longer compressed length. So if you've been running a 9" Pro, Carrera, etc., you need to go to an 8" Bilstein.

  • Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting
    Black 90 Degree -3 AN Flare to 1/8 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN adapter fitting. Black anodized finish will give your engine compartment the look you are after.

    • 90 degree elbow
    • -3 AN flare to 1/8" NPT thread
    • Fuel line hose connector

    Fitting Thread Application Chart (GIF)

  • Bilstein 30/30 Aluminum Threaded Gas Shock-9 Inch Stroke, Comp 3/Reb 3
    Bilstein 30/30 Aluminum Threaded Gas Shock-9 Inch Stroke, Comp 3/Reb 3
    x
                
    • 46mm (1.81") diameter threaded aluminum body
    • Includes Schrader valve and circlip rod guide
    • Rebuildable; shock can be assembled and disassembled for rapid repair or valving change
    • Hard anodized for durability
    • Valve stacks and valving kits available separately
    • Available with linear or digressive piston
    • Every part of the ASN shock is available separately for economical repair
    • World class performance in an aluminum shock at an economy price
    • Bilstein's famous consistent, fade-free performance
    • Designed for, but not limited to Modifieds, Late Models, & Sprint Cars

    Note: With mono-tube gas shocks, you have a longer compressed length. So if you've been running a 9" Pro, Carrera, etc., you need to go to an 8" Bilstein.

  • Bilstein 30/30 Aluminum Threaded Gas Shock-7 Inch Stroke, Comp 3/Reb 3
    Bilstein 30/30 Aluminum Threaded Gas Shock-7 Inch Stroke, Comp 3/Reb 3
    x
                
    • 46mm (1.81") diameter threaded aluminum body
    • Includes Schrader valve and circlip rod guide
    • Rebuildable; shock can be assembled and disassembled for rapid repair or valving change
    • Hard anodized for durability
    • Valve stacks and valving kits available separately
    • Available with linear or digressive piston
    • Every part of the ASN shock is available separately for economical repair
    • World class performance in an aluminum shock at an economy price
    • Bilstein's famous consistent, fade-free performance
    • Designed for, but not limited to Modifieds, Late Models, & Sprint Cars

    Note: With mono tube gas shocks, you have a longer compressed length. So if you've been running a 9" Pro, Carrera, etc., you need to go to an 8" Bilstein.

Goto Previous PagePrevious Page
1 2 3 4 5