Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"2 inch mounting bracket" Page 1 of 8

  • Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/16” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • 1-5/16" square ports
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Includes (1) left and (1) right side manifold
    • Gaskets and bolts/hardware are not included
  • Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    Linear Actuator Aluminum Mounting Bracket, 1-1/2 x 1-1/2 Inch
    x
                

    These billet aluminum mounting brackets are for our Linear Actuator 910-64290. They are designed to mount your linear actuators to hoods, trunks, etc. on either flat or angled surfaces. Solid aluminum construction provides the greatest strength possible while remaining a great looking piece. The brackets are a satin finish, but can be polished to a bright shine.  Sold individually - you may need two mounts (one for each end of the actuator).  Includes bracket and three securing screws.

    • Billet aluminum
    • Satin finish
    • Mount linear actuators to hoods, trunks, etc.
    • Mount to either flat or angled surfaces
    • Sold individually - may need one mount for each end
    • Works with Linear Actuator 910-64290
    • Includes bracket and three securing screws

    NOTE: The vendor no longer includes the mounting plate as pictured in previous catalogs.

  • IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    You can weld these brackets to your 9" Ford housing and install it in your 1978-88 GM Metric chassis. Includes upper and lower control arm mounts. Welding required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes.

  • Radius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch Hole
    Radius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch Hole
    x
                Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel. 4-3/8 Inch Tall

    NOTE: For use with spherical rod ends.
  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 2-3/4 Inch
    Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 2-3/4 Inch
    x
                Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

    NOTE: For use with spherical rod ends.
  • License Plate Bracket, 2 Inch Tube Clamp
    License Plate Bracket, 2 Inch Tube Clamp
    x
                License plate mounting brackets attach to tube axles, spreader  bars, etc. with a 2" O.D. This license tag bracket is available in plain or polished aluminum finishes.
            
  • Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/8” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Sold each, specify right or left.
    • Gaskets and bolts/hardware are not included
  • U Weld Model A Frame Assembly Kit
    U Weld Model A Frame Assembly Kit
    x
                If you're willing to pick up a welder in order to lower your rodding costs, Speedway Motors has a great new frame option for you.  The all-new Speedway Motors U-Weld-It Model A Frame Kit is the perfect way for do-it-yourself rodders to construct a solid, well-engineered chassis on a budget. This kit features all of the components featured on Speedway Motors' popular Model A Frame in one ready-to-weld package.

    The kit includes:
    • Boxed Model A frame rails with drilled and tapped body mounts
    • Two-inch dropped front crossmember
    • Front hairpin and rear four-bar suspension brackets
    • Front and rear shock mounts
    • S/B Chevy engine mounts
    • Transmission crossmember and mount
    • Rear crossmember kit
    • Rear panhard bar mount
    • Vega steering box mount
    • Master cylinder mount with brake pedal and hardware
    All parts are pre-cut and ready to weld together, making it simple for those with proper welding skills to assemble a strong, top-quality chassis for their street rod project.
  • Weld-On Chassis Tabs, 1-3/4 Inch with 1/2 Inch Hole
    Weld-On Chassis Tabs, 1-3/4 Inch with 1/2 Inch Hole
    x
                

    Weld on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    x
                

    Weld these brackets to your 9" Ford housing and install it in your 1978-1988 GM Metric chassis. Includes upper and lower control arm mounts, and weld-on caliper brackets for use with Metric calipers. Welding is required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes. 

    This kit is NOT IMCA Hobby Stock legal but is IMCA Stock Car approved. 

  • Speedway Vertical Dry Sump Tank Mounting Bracket
    Speedway Vertical Dry Sump Tank Mounting Bracket
    x
                

    This mounting kit includes 2 hose clamps, 2 washers and 1 padded bracket. It is designed to work with 910-15165 and 940-15169 tanks.

    • Includes:
      • 2 hose clamps
      • 2 washers
      • 1 padded bracket 
    • Works with dry sump pump tanks (91015165 and 91015168)
  • Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    x
                

    These beautiful LED tail lights are carved out of a solid billet of 6061-T6 aluminum and then chrome plated. They only protrude 3/16".

    • Bright LED lights for safety and function
    • Integrated design with 3 functions: tail, turn & brakes
    • Extremely bright LED's, generate virtually no heat, use little power and have long life
    • Fully assembled for easy installation
    • Detailed instructions with color coded wiring for easy installation
    • Oval style with smooth recessed lens and internal prism
    • Design matches other Lokar Oval style products
    • Stainless hardware and zinc plated mounting brackets

    Lokar LED Tail Light Installation Instructions (PDF)

  • Classic Instruments CH59NT54SLF 59-60 Chevy Impala/El Camino Gauge Set
    Classic Instruments CH59NT54SLF 59-60 Chevy Impala/El Camino Gauge Set
    x
                Classic Instruments has put together a package for  the ‘59-’60 Chevy Impala and El Camino! This package will include a  speedometer, fuel (0-30 ohms), volts, oil, and temp gauges. In order to  make your installation as easy as possible, we have included all the  necessary hardware to mount your gauges in your dash. Standard Classic  Instruments 5 inch mounting brackets, four 2 inch brackets, three  machine screws, a polished aluminum adapter ring, and all sending units  except fuel are included. To put the finishing touch on this package,  two green turn signals and a red high beam indicator have been mounted  into the speedometer dial face. 
    • "Nostalgia VT" face design
    • Includes mounting brackets & bezels needed to fit stock dash pod
    • Standard GM sender pack included
    • Turn signal and high beam indicators pre-installed in speedometer face
    • Fuel level gauge pre-programmed 0-30 ohm to allow stock fuel tank sender to be used
    • No fuel sender included
  • Weld-On Chassis Tabs, 2-1/4 Inch with 1/2 Inch Hole
    Weld-On Chassis Tabs, 2-1/4 Inch with 1/2 Inch Hole
    x
                

    Weld on tabs for miscellaneous mounting jobs. You can't make them this good for this price! 

    Sold in packs of 5.

  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Black Universal Brake Pedal Bracket
    Black Universal Brake Pedal Bracket
    x
                
    • Black Powdercoated finish
    • Mounting bracket sets off frame rail 2 inches for clearance
    • Push rod center is 4 inches from frame rail mounting bracket
    • Uses standard GM booster with 4 bolt mounting holes, 3-3/8" centers
    • 10-1/2" tall brake pedal arm with clevis and push rod
    • Pedal arm has 1/2" hole for pedal pad. (Included)
    • Mounting hardware included
  • Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    Model T Cowl or Tail Light Brackets for 9-1/2 Inch Lamp
    x
                

    Mounts to side of 9-1/2" tall lamps and any flat surface. Conceals wiring. Available in brass or chrome.

    Note: This is the bracket only (hardware NOT included).

  • Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
    Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
    x
                Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

    NOTE: For use with spherical rod ends.
  • Five Hole Mounting Bracket
    $4.99
    Product Rating: 4.00 Stars
    Five Hole Mounting Bracket
    x
                

    These 5 hole brackets mount to radius rods, brake rods, third links, panhard bars, etc. Hole sizes available include: 1/2", 5/8" & 3/4".  

    • 1/8" steel plate
    • 7-1/2" tall
  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Dropped Semi-Elliptical Gasser Axle Kit, Chevy Spindle, 6 Inch Drop
    Dropped Semi-Elliptical Gasser Axle Kit, Chevy Spindle, 6 Inch Drop
    x
                

    Black steel, universal application, professionally engineered. Spring pads to be welded to the axle by the builder and are therefore adjustable on the axle for different frame widths. For 1949-54 Chevy style spindles.

    Gasser Build Info (PDF)

    Kit includes:

    • 48" double bend tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" 6-leaf springs
    • all hardware

    916-3903 Instructions (PDF)

  • Dropped Semi-Elliptical Gasser Axle Kit, Ford Spindle, 6 Inch Drop
    Dropped Semi-Elliptical Gasser Axle Kit, Ford Spindle, 6 Inch Drop
    x
                

    Black steel, universal application, professionally engineered. Spring pads to be welded to the axle by the builder and are therefore adjustable on the axle for different frame widths. For 1937-1941 Ford style spindles.

    Gasser Build Info (PDF)

    Kit includes:

    • 48" double bend tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" 6-leaf springs
    • all hardware

    916-3903 Instructions (PDF)

  • Dropped Semi-Elliptical Gasser Axle Kit, Chevy Spindle, 4 Inch Drop
    Dropped Semi-Elliptical Gasser Axle Kit, Chevy Spindle, 4 Inch Drop
    x
                

    Black steel, universal application, professionally engineered. Spring pads to be welded to the axle by the builder and are therefore adjustable on the axle for different frame widths. For 1949-54 Chevy style spindles.

    Gasser Build Info (PDF)

    Kit includes:

    • 48" double bend tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" 6-leaf springs
    • all hardware

    916-3903 Instructions (PDF)

  • Dropped Semi-Elliptical Gasser Axle Kit, Ford Spindle, 4 Inch Drop
    Dropped Semi-Elliptical Gasser Axle Kit, Ford Spindle, 4 Inch Drop
    x
                

    Black steel, universal application, professionally engineered. Spring pads to be welded to the axle by the builder and are therefore adjustable on the axle for different frame widths. For 1937-1941 Ford style spindles.

    Gasser Build Info (PDF)

    Kit includes:

    • 48" double bend tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" 6-leaf springs
    • all hardware

    916-3903 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Speedway 2 5/8 Inch Oil Temperature Gauge
    Speedway 2 5/8 Inch Oil Temperature Gauge
    x
                

    Lightweight 2 5/8” Speedway Motors gauges feature a chrome bezel, but we have included both a black and silver bezel to allow you to customize your panel. The backlight, white face makes these gauges easy to read from 100 – 280 deg. F. Also included with the gauge is a mounting bracket with all necessary hardware, 6ft. capillary tube, sending unit adaptor, and complete installation instructions.

     910-65019 Instructions (pdf)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Universal Frame Rail Power Brake Pedal Mount
    Universal Frame Rail Power Brake Pedal Mount
    x
                
    • Mounting bracket sets off frame rail 2 inches for clearance 
    • Push rod center is 4 inches from frame rail mounting bracket
    • Uses standard GM booster with 4 bolt mounting holes, 3-3/8" centers
    • 10-1/2" tall brake pedal arm with clevis and push rod
    • Pedal arm has 1/2" hole for pedal pad.
    • Mounting hardware included
  • Top Brake Bracket - 3.25 Inch Spindle, 10 Inch Diameter
    Top Brake Bracket - 3.25 Inch Spindle, 10 Inch Diameter
    x
                

    These top mount brake brackets are machined of aluminum for minimum weight. All brake mounts are designed to bolt on perfectly centered with no spacers.

    • Top mount
    • Caliper bolt spacing: 3.25"
    • 2-piston calipers
    • Spindle bolt center: 3.25"
    • Rotor diameter: 10"

    Brake Mount Chart Application (GIF)

  • Top Brake Bracket - 3.25 Inch Spindle, 11 Inch Diameter
    Top Brake Bracket - 3.25 Inch Spindle, 11 Inch Diameter
    x
                

    These top mount brake brackets are machined of aluminum for minimum weight. All brake mounts are designed to bolt on perfectly centered with no spacers.

    • Top mount
    • Caliper bolt spacing: 3.25"
    • 2-piston calipers
    • Spindle bolt center: 3.25"
    • Rotor diameter: 11"

    Brake Mount Chart Application (GIF)

  • AFCO 5-Hole Steel Mounting Bracket, 1/2 Inch Holes
    AFCO 5-Hole Steel Mounting Bracket, 1/2 Inch Holes
    x
                Use these AFCO 1/8" thick steel plates to mount radius rods, brake rods, third link, Panhard bars, etc.
            
  • Winters Grand National Rear End w/ GM Metric Brackets
    Winters Grand National Rear End w/ GM Metric Brackets
    x
                

    Winters full floating Ford 9 inch Grand National rear end for Metric chassis features lightweight steel hubs with brake rotor mounts. This Grand National rear end assembly comes complete with a new housing, two hubs, two brake rotors, two solid 31-spline axles, two drive flanges, ten lug nuts, rotor and drive flange bolts along with all the needed bearings and seals.

    Now available in either a 5 on 5" or 5 on 4-3/4" bolt pattern and three different widths:

    • 58" centered
    • 60" centered
    • 62" with a 1/2" offset
  • Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    Speedway Aluminum Fuel Tank, 3-1/2 Gallon, 8 x 16 Inch
    x
                

    These vintage style brushed aluminum gas tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.

    • Has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom
    • Mounting brackets sold separately
    • Brushed aluminum finish 
    • 3-1/2 gallon, 16" x 8"
  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    New
    Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    x
                These disc brake caliper brackets for left front calipers are made from high quality aluminum.  They feature an anodized black finish and include all necessary hardware. They are intended for 10.2" (10-1/8") diameter rotors.
    • Sprint car
    • Black Left front brake caliper mount
    • 3.25" long
    • For 10.2" (10-1/8") rotor
  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the right front wheel.

  • Semi-Elliptical Straight Axle Kit for Ford Spindle
    Semi-Elliptical Straight Axle Kit for Ford Spindle
    x
                

    If you are looking for that "up in the front" gasser look or just need a straight axle, we've got your deal! We can supply you a complete semi-elliptical straight axle front end kit with springs and hardware. For 1937-41 Ford style spindles.

    Gasser Build Info (PDF)

    Plain steel, universal application, professionally engineered. The spring pads are adjustable on the axle for different frame widths (welding required). Choose axle length from kingpin to kingpin, or order a custom length.

    Kit includes:

    • tube axle w/ welded ends (0.250" wall tubing)
    • two axle pads and U-bolts
    • two 1-3/4" spring shackles w/ nylon bushings
    • two frame mounting brackets
    • two 32" six-leaf springs
    • all hardware
    916-3903 Instructions (PDF)
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8