Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"2 inch clamp" Page 1 of 7

  • Stainless Steel Exhaust/Muffler Tube Clamps
    Stainless Steel Exhaust/Muffler Tube Clamps
    x
                

    These superior quality muffler tube clamps/u-bolts are 100% stainless steel. They are ideal for any exhaust system and feature a saddle-type clamp for added strength. Choose plain or polished. Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" sizes available. Thread size on tube clamps is 8mm-1.25.

    • Stainless steel
    • Ideal for any exhaust system 
    • Saddle-type clamp for added strength
    • Thread size on clamps is 8mm-1.25
    • Choose plain or polished
    • Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" pipe diameter
  • Wilwood 270-9761 Dynamic Brake Clamp, 6 x 5-1/2 Inch Bolt Pattern
    Wilwood 270-9761 Dynamic Brake Clamp, 6 x 5-1/2 Inch Bolt Pattern
    x
                

    Wilwood's Sprint inboard hub & adapter kit provides a basis to bolt dynamic rotor rotor mounting of standard 6 x 5.50" bolt pattern rotors. Contains rotor adapter and dynamic rotor mounting bolt kit. Made from high strength aluminum. It provides a lightweight and strong solution for rotor mounting. Weighs only 1.2 lbs.

    • Sprint Inboard
    • Sprint / Midget use only 
    • Material: Aluminum
    • Finish: Black Anodize
    • Weight: 1.2
    • Rotor Mount Bolt Circle (in.): 8 x 3.35
    • Mount Type: Adapter-Dynamic
    • Adapter bolt Circle (s) 6-Bolt Type: 6 x 5.50 in.

    Will clamp to a Winters axle and dynamic mount rotors.

  • Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 3.67 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • AIRAID 120-350 Air Tube Coupler with Clamps, 3-1/2 Inch Diameter
    AIRAID 120-350 Air Tube Coupler with Clamps, 3-1/2 Inch Diameter
    x
                These silicon hose connectors are great for use with  AirAid's   performance air intake systems. They come complete with clamps and are  designed to be used with 3-1/2"   diameter air tubing.
    • Works with 3-1/2" tubing (178100350)
    • Durable silicon material
    • Stainless steel clamps included
  • AIRAID 140-350 3-1/2 Inch Silicon Hump Hose with Clamps
    AIRAID 140-350 3-1/2 Inch Silicon Hump Hose with Clamps
    x
                

    These silicon hump hose connectors are great for use with AirAid's performance air intake systems. They come complete for installation with clamps and are designed to be used with 3-1/2" diameter air tubing.

    • Works with 3-1/2" tubing (178100350)
    • Clamps included
    • Allows for more movement in system as compared to a coupler
  • Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    Longacre 22569 Rear End Axle Breather Vent Kit, 1-1/2 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • 1/4" NPT
    • Clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • RapidAir M8064 Maxline Air Hose Clamps for 1/2 Inch Tubing, 10 Pack
    RapidAir M8064 Maxline Air Hose Clamps for 1/2 Inch Tubing, 10 Pack
    x
                

    Use these hose clamps to secure your airline tubing to your garage/shop wall or ceiling during installation.

    • For 1/2" tubing
    • 10 pack

    RapidAir Maxline Warranty (PDF) 

  • Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Gates 32960 Power Grip Hose Clamp - 2 1/4 Inch to 2 1/2 Inch OD
    Gates 32960 Power Grip Hose Clamp - 2 1/4 Inch to 2 1/2 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    Stainless Thru-Frame Brake Line Fittings, 1-1/2 - 2 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 1-1/2" to 2" wide.

    Sold in pairs.

  • Crankcase / Rear End Axle Breather Vent Filter Only, 1/2 Inch
    Crankcase / Rear End Axle Breather Vent Filter Only, 1/2 Inch
    x
                

    These billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.  These clamp-on style crankcase vent filters are washable for easy clean up and reuseable.

    Crankcase/Rear End Axle Breather Vent Filter Only

    • Clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • For 1/2" connection

     

  • AFCO 20142B Tube Clamp Collar, 4-1/2 Inch Wide, 1/8 Inch Wall, 4 Bolt
    AFCO 20142B Tube Clamp Collar, 4-1/2 Inch Wide, 1/8 Inch Wall, 4 Bolt
    x
                

    AFCO Tube Clamp Collar

    • 4-1/2 Inch Wide
    • 1/8 Inch Wall
    • Mounts on 3" Tube
    • 4 Bolt
  • DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Works best on Stainless Steel headers.

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 1/2" - 11/16" OD

    Instruction Sheet (PDF)

  • Gates 32934 Power Grip Hose Clamp, 1-5/16 Inch - 1-1/2 Inch OD
    Gates 32934 Power Grip Hose Clamp, 1-5/16 Inch - 1-1/2 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    AIRAID 9406 Stainless Steel #64 Hose Clamp, 3-1/2 Inch - 4-3/8 Inch
    x
                

    Use these stainless steel tube clamps to secure your large diameter air hoses and interior heating duct.  Clamps over 3-1/2" - 4-7/8" O.D. hose.

    • Quick and easy-to-use
    • Stainless steel construction
    • Secures 3-1/2" - 4-7/8" hoses
    • Size #64
  • Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    Quick Tight Hose Clamp, 1 Inch to 1-1/2 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1" to 1.50" O.D. hose.
            
  • Speedway Single Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Single Taper
    Speedway Single Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Single Taper
    x
                

    Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.

    You will need a 1" hex (6-sided) socket. 

    1/2" Fine Thread fits most Ford and Mopar pattern studs.

    • 45° taper
    • 1/2" RH Fine Thread, Single Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

     

  • Ram 88761HDX GM Performance Clutch Set, 10-1/2 x 1-1/8 Inch-26
    Ram 88761HDX GM Performance Clutch Set, 10-1/2 x 1-1/8 Inch-26
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieve with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 10-1/2" x 1-1/8 Inch-26 Spline
    • GM style applications
  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Longacre 22566 Rear End Axle Breather Vent, 1-1/2 Inch, Breather Only
    Longacre 22566 Rear End Axle Breather Vent, 1-1/2 Inch, Breather Only
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Breather Only
    • Clamp on design, no welding required
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-1/2 in. round bar.
  • AFCO Stainless Hose Clamp, 1-5/8 Inch - 2-1/8 Inch
    AFCO Stainless Hose Clamp, 1-5/8 Inch - 2-1/8 Inch
    x
                

    AFCO polished stainless steel hose clamps. Fits 1-5/8" to 2-1/8" O.D. hoses. Unique thumb screw eliminates the need for a screwdriver for quick and easy removal. Also has a hole for safety wire.

  • Dynatech   780-41051 Exhaust, 3-1/2 Inch Elbow Kit w/ Tube Clamps
    Dynatech 780-41051 Exhaust, 3-1/2 Inch Elbow Kit w/ Tube Clamps
    x
                

    Dynatech® Exhaust, 3-1/2 Inch elbow kit w/ tube clamps.

    Works with:

    • Standard, spread port, and 18 degree Dynatech Chevy headers with tube size 1-3/4" to 1-7/8" - (part number 31171141010)
    • "X" and "Y" pipes - (part numbers; 31178021206, 31178021208, and 31178031201)
    • Mufflers - (part numbers; 31177606352 and 31177614402)
    • Turn Downs - (part numbers; 31178000200 and 31178000050) 

     

  • Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Gates 32925 Power Grip Hose Clamp, 15/16 Inch - 1 1/16 Inch OD
    Gates 32925 Power Grip Hose Clamp, 15/16 Inch - 1 1/16 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 15/16" - 1-1/16" OD

    Instruction Sheet (PDF) 

  • DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    Works best on Stainless Steel headers.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Dynatech   794-93026 TorQ Tip Exhaust Tips - Pair, 2-1/2 Inch
    Dynatech 794-93026 TorQ Tip Exhaust Tips - Pair, 2-1/2 Inch
    x
                

    Put the finishing touch on your new SuperMaxx or MuscleMaxx system. The all new Dynatech® TorQ Tip provides good looks and performance to any street rod. With their unique insert design, TorQ Tips allow for a flush fit with the outside diameter of your exhausts's tailpipe. This makes for a smooth, clean look that doesn't take away from your car's appearance like bulky, clamped-on tips tend to do. Another quality feature of these tips is the all Billet Aluminum construction, giving them the unmatched strength, function, and finish you've come to expect from Dynatech®. 

    • Fits: 2-1/2 Inch pipe
  • R2C Engine Breather Filter, 1-1/2 Inch
    R2C Engine Breather Filter, 1-1/2 Inch
    x
                

    R2C premium breather filters are designed to offer racers the finest crankcase and tank breather technology available today. R2C's flange design improves oil return and significantly reduces the dripping caused by oil collected at the lower flange associated with competitors breather fllters.  R2C breather construction also ends the problems associated with cap failures. HD screens eliminate crushed breathers. R2C breathers are fully washable using biodegradable solvents.

    Available in carbon fiber or red, blue and black anodized aluminum cap finishes.

     

  • K&N Filters 100-8570 Midget Air Filter, 6-1/2 Inch Tall
    K&N Filters 100-8570 Midget Air Filter, 6-1/2 Inch Tall
    x
                

    Lightweight yet durable, this air box is a must for any racer currently using traditional multi-siamese stacks. Constructed from ultra-lightweight carbon fiber and weighing in at just under 4.5 lbs, K&N's Midget Style air box provides ample air flow for your racing needs.

    • Base does not have holes cut, so it fits most stack configurations
    • Once base is in place, slip the main filter assembly over the stacks
    • Supplied spring clip clamps secure the filter for positive seal and ease of servicing
  • Double Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Double Taper
    Double Sided Steel Lug Nut, 1/2 Inch RH Fine Thread, Double Taper
    x
                

    Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

    You will need a 1" hex (6-sided) socket. 

    1/2" Fine Thread fits most Ford and Mopar pattern studs.

    • 45° taper
    • 1/2"-20 RH Fine Thread, Double Taper

    What's The Angle
    Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

    If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

     

     

  • Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide.

    Sold in pairs.

  • Dynatech   794-93025 TorQ Tip Exhaust Tip - Single, 2-1/2 Inch
    Dynatech 794-93025 TorQ Tip Exhaust Tip - Single, 2-1/2 Inch
    x
                

    Put the finishing touch on your new SuperMaxx or MuscleMaxx system. The all new Dynatech® TorQ Tip provides good looks and performance to any street rod. With their unique insert design, TorQ Tips allow for a flush fit with the outside diameter of your exhausts's tailpipe. This makes for a smooth, clean look that doesn't take away from your car's appearance like bulky, clamped-on tips tend to do. Another quality feature of these tips is the all Billet Aluminum construction, giving them the unmatched strength, function, and finish you've come to expect from Dynatech®. 

    • Fits: 2-1/2 Inch pipe.
    • Sold individually.
  • AIRAID 101-352 3-1/2 Inch Master Air Intake Kit with 6 Inch Filter
    AIRAID 101-352 3-1/2 Inch Master Air Intake Kit with 6 Inch Filter
    x
                

    If you can imagine a custom intake system, now you can build it! The U-Build-It (UBI) kit is the most versatile custom intake system on the market. AirAid's master kits include everything you need to build a complete system, and all components are also available individually for maximum adaptability. Whether you are doing an engine swap or have a custom application where space is tight, the AIRAID® UBI Intake System can accommodate just about any application. The only limitation is your imagination!

    Each UBI master kit and individual intake tubes are available in 3", 3.5", and 4" diameters. The roto-molded intake tubes feature multiple angles and straights that allow you to route the intake to any desired location in the engine compartment.

    Kit includes:

    • 3-1/2" Intake tube
    • Coupler
    • Hump hose
    • Reducer
    • Brackets
    • Hose clamps
    • Hardware
    • Premium AIRAID® 6" filter*

    * Not Legal for sale or use in CA on pollution controlled vehicles 

  • AIRAID 101-351 3-1/2 Inch Master Air Intake Kit with 9 Inch Filter
    AIRAID 101-351 3-1/2 Inch Master Air Intake Kit with 9 Inch Filter
    x
                

    If you can imagine a custom intake system, now you can build it! The U-Build-It (UBI) kit is the most versatile custom intake system on the market. AirAid's master kits include everything you need to build a complete system, and all components are also available individually for maximum adaptability. Whether you are doing an engine swap or have a custom application where space is tight, the AIRAID® UBI Intake System can accommodate just about any application. The only limitation is your imagination!

    Each UBI master kit and individual intake tubes are available in 3", 3.5", and 4" diameters. The roto-molded intake tubes feature multiple angles and straights that allow you to route the intake to any desired location in the engine compartment.

    Kit includes:

    • 3-1/2" Intake tube
    • Coupler
    • Hump hose
    • Reducer
    • Brackets
    • Hose clamps
    • Hardware
    • Premium AIRAID® 9" filter*

    * Not Legal for sale or use in CA on pollution controlled vehicles 

  • Flexible Radiator Hose Kit, 36 Inch
    From: $79.99
    Product Rating: 5.00 Stars
    Flexible Radiator Hose Kit, 36 Inch
    x
                

    Flexible stainless steel hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kits includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.

    • Four 48" Straight Pipes
    • Four 90° Pipes
    • Four 45° Pipes 
    • Four 180° U-Bends
  • Dynatech   794-91225 V-Clamp Collar Assembly Kit, 2-1/2 Inch
    Dynatech 794-91225 V-Clamp Collar Assembly Kit, 2-1/2 Inch
    x
                Kit includes two weld-on mild steel V-clamp rings and a stainless steel V-band clamp. Works great for header to muffler connections.
            
Goto Previous PagePrevious Page
1 2 3 4 5 6 7