Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1947 chevy pickup" Page 1 of 3

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • BedWood Wood Kit for 1947-51 1st Series Chevy 3100 SWB Stepside Pickup
    BedWood Wood Kit for 1947-51 1st Series Chevy 3100 SWB Stepside Pickup
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 First Series Chevy 3100 SWB Stepside 
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 76-7/8" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Bolt-In 1947-54 Chevy Pickup Center Chassis Crossmember
    Bolt-In 1947-54 Chevy Pickup Center Chassis Crossmember
    x
                

    Build a firm foundation for your vintage Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Tubular steel bolt-together assembly – no welding required
    • Laser cut from 11-gauge steel plate
    • Bolt-in boxing plates add strength to frame

    910-64754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • 1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    New
    1947-54 Chevy Pickup Motor Mounts for LS Series Engine Swap
    x
                
    These LS Series Chevy bolt-in motor mounts are designed for use with Speedway 1947-'54 Chevy Pickup Mustang II Bolt-In Crossmember # 910-44754. They will bolt right in for your new LS engine.  Kits include steel frame mounts, steel engine mounts, rubber cushion set, and all hardware.
    • Works only with crossmember (91044754)
    • For LS Series Chevy engines
    • For 1947-54 Chevy Pickups

    Includes:

    • Steel frame mounts
    • Steel engine mounts
    • Rubber cushion set
    • All hardware
  • Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    x
                

    Build a firm foundation for your vintage 1/2 ton Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a complete '47-'54 Chevy pickup frame using only basic hand tools and a drill.

    This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.  

    • for 1/2 ton chassis
    • 60" wide 9” rearend housing with welded suspension brackets
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember
    • 11” steel-bodied coil-over shocks

    910-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately.

  • 1947-54 Chevy Pickup Motor Mounts for Bolt-In IFS
    1947-54 Chevy Pickup Motor Mounts for Bolt-In IFS
    x
                

    Small Block Chevy bolt-in motor mounts for use with Speedway '47-'54 Chevy Pickup Mustang II Bolt-In Crossmember # 910-44754. Kit includes steel frame mounts, steel engine mounts, rubber cushion set, and all hardware.

    910-54754 Instructions (PDF)

  • 1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    1947-1954 Chevy 1/2 Ton Pickup Truck Frame Rails
    x
                

    Build a firm foundation for your vintage 1947-54 Chevy 1/2 ton pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Laser cut from 7-gauge steel plate
    • Replicates shape and dimensions of original Chevy frame
    • Welded on a rail fixture to ensure proper shape
    • Ground and sanded to prep for finishing
    • For '47-'54 1/2 pickups

    916-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    Classic Instruments 1947-53 Chevy Pickup White Gauge Set
    x
                Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.
            
  • Classic Instruments 1947-53 Chevy Pickup Vintage Gauge Set
    Classic Instruments 1947-53 Chevy Pickup Vintage Gauge Set
    x
                Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.
            
  • Classic Instruments 1947-53 Chevy Pickup Nickel Gauge Set
    Classic Instruments 1947-53 Chevy Pickup Nickel Gauge Set
    x
                Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.
            
  • 1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion w/ Hubs
    1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion w/ Hubs
    x
                

    If you want to keep your original drum brakes on your favorite truck, we have you covered. The original came with ball-type wheel bearings and if you can find them, they are very expensive. Upgrading to modern tapered bearings is the only way to go. Tapered bearings disperse heat better and can deal with today’s grooved roads and modern wheels and tires much better than the original ball type.

    • Kit 916-31962 includes two new hubs, two inner and two outer wheel bearings, race, and two seals.
  • BedWood Wood Kit for 1947-51 Chevy 3600 LWB Stepside Pickup
    BedWood Wood Kit for 1947-51 Chevy 3600 LWB Stepside Pickup
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 Chevy 3600 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 85-13/16" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • TCI 1947-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series Chassis
    TCI 1947-1953 1/2 Ton Chevy Pickup Rear Leaf Spring Kit, 3100 Series Chassis
    x
                

    Improve the ride, handling and stance of your classic truck with a new rear leaf spring kit. These kits are desgined to lower your truck 4-inches from stock and provide a smoother ride. Spring hangers and shock crossmember bolt on; axle pads are weld-on. Kits include leaf springs, brackets, shock kit, mounting and instructions.

    Chevy Pickup Rear Leaf Spring Installation Instructions (PDF)

  • 1947-54 Chevy/GMC Pickup Dropped Axle
    1947-54 Chevy/GMC Pickup Dropped Axle
    x
                

    Our 3" dropped axle for your classic '47-'54 Chevy half-ton pick-up will get the front end down where you want it. The center portion of the axle is made of 2" DOM tubing while the ends are CNC milled for solid steel. These axles give you 3" of drop.

    The Chevy axles require the steering arm to be modified to accept rod ends or tie rods. U-bolts sold separately.

    • King pin to king pin centers = 50.5"
    • 6" drop measured from spring pad to spindle boss center
    • Axle accepts a 1-3/4" wide spring
    • Spring pad center-to-center = 26.75"
    • Center to center of u-bolt holes is 2.30" side to side
    • Center to center of u-bolt holes front to rear is 3.195"
    • Spring pad width is 29.072" center to center of the outer U-bolt holes
    • Axle Kingpin Boss Height:  2-7/16" (2.438")
    • Axle will provide a camber reading of -1.5 degrees
  • Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1947-53 Chevy Pickup Bed Roll Lights
    1947-53 Chevy Pickup Bed Roll Lights
    x
                

    These neat little lights take advantage of the openings on the ends of your bed rolls- space that is otherwise wasted. The simple-to-install LED lights provide extra safety by augmenting your existing tailights, turn signals, and brake lights. The aluminum housings come polished, but can also be painted to match your truck.

    Has a 1.625" body O.D. and 2.00" overall length.

  • BedWood Wood Kit for 1947-51 1st Series Chevy 3100 LWB Stepside Pickup
    BedWood Wood Kit for 1947-51 1st Series Chevy 3100 LWB Stepside Pickup
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Designed for 1947-51 First Series Chevy 3100 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 85-13/16" Length x 50" Width
    • Board Qty: 9
    • Bed Strip Qty Needed: 8

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

  • Speedway 1947-54 Chevy Truck 4-Link Rear Suspension Kit Minus Axle
    Speedway 1947-54 Chevy Truck 4-Link Rear Suspension Kit Minus Axle
    x
                

    Get a great rear suspension for your classic with this 1947-54 Chevy pickup truck triangulated 4 bar rear suspension kit. This precision engineered kit includes bolt-on frame brackets, weld-on axle brackets, tubular steel bars, and chromoly adjusters with urethane bushings. This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.

    • Allows the do-it-yourself rodder to use the rear end of their choice
    • Modern geometry and handling
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember

    910-047541 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts, coil-overs, and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately. 

  • Walker Z-520-1 1947-1953 Chevy Pickup Radiator w/o A/C Condenser
    Walker Z-520-1 1947-1953 Chevy Pickup Radiator w/o A/C Condenser
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Simple bolt-in install
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Top Inlet:  Center (1-1/2")
    • Bottom Outlet:  Right (1-3/4")
    • Oil Cooler Fittings:  1/8" pipe thread
    • Condenser Fittings:  #6 and #8 O-ring design
    • Condenser Refrigerant:  R-12 or R-134a

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker Z-AC520-1 1947-1953 Chevy Pickup Radiator w/ A/C Condenser
    Walker Z-AC520-1 1947-1953 Chevy Pickup Radiator w/ A/C Condenser
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Simple bolt-in install
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Top Inlet:  Center (1-1/2")
    • Bottom Outlet:  Right (1-3/4")
    • Oil Cooler Fittings:  1/8" pipe thread
    • Condenser Fittings:  #6 and #8 O-ring design
    • Condenser Refrigerant:  R-12 or R-134a

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   

  • Rear Fuel Tank Brace for 1947-54 Chevy Pickup Truck
    Rear Fuel Tank Brace for 1947-54 Chevy Pickup Truck
    x
                

    Build a firm foundation for your vintage Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Bolt in
    • Provides extra mounting options for fuel tank and exhaust

    910-84754 Instructions (PDF)

  • Radiator Support Brace for 1947-54 Chevy Pickup
    Radiator Support Brace for 1947-54 Chevy Pickup
    x
                

    Build a firm foundation for your vintage Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Bolt in lower radiator support to replace your rusted or missing original
    • Ideal replacement to avoid trimming your original for steering rack clearance

    910-14754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • Omega Kustom 232025 1947-1953 Chevy Pickup Black 5 In. Quad Gauge Set
    Omega Kustom 232025 1947-1953 Chevy Pickup Black 5 In. Quad Gauge Set
    x
                

    These 5" Omega Kustom Chevy truck gauges are the perfect finishing touch for your truck. They have a programmable electric speedometer and a quad gauge with fuel level, oil pressure, water temperature, and voltage. Each set includes sending units and a GM style speedometer sender. Works with 12 volt systems ONLY.

    The housing measures 4-1/2" and the outside bezel measures 4-11/16".

    1947-1953 Chevy Pickup Gauge Installation Instructions (PDF)

    Note: Fuel sending unit is the 5-bolt 240 ohm empty, 33 ohm full universal style, NOT the factory original style.

  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
  • 1947-54 Chevy Pickup Truck Bolt-in Transmission Crossmember
    1947-54 Chevy Pickup Truck Bolt-in Transmission Crossmember
    x
                These new replacement transmission crossmembers are designed for use with 1947-54 Chevy Pickups and can be used with original or reproduction frame rails.  Sturdy steel construction and the versatility to accommodate most GM transmissions make these crossmembers the ideal choice for your project. 
    • For use with original or reproduction frame rails
    • Can be mounted to accommodate most GM transmissions
    • Compatible with under-floor brake pedal
  • 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    Measures 38" x 12" x 8-1/2".  The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank.  The total width of this tank is 44" with the mounting tabs.

    • 1/4" female NPT for vent hose / fitting
    • Male AN# 6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads
  • Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    x
                

    Convert your straight axle truck to disc brakes with our bolt-on disc brake bracket kit. Kit is a true bolt-on using the factory holes on the 1/2 ton spindle. Kit includes caliper brackets, bearing adapters and mounting hardware.

    • Increases track width 7/16" per side, 7/8" total
    • Works with 15" or larger wheels
    • Works with 5 on 4-3/4 Inch bolt patterns

    Chevy Half Ton Pickup Brake Kit Installation Instructions (PDF)

  • Omega Kustom 222025 1947-1953 Chevy Pickup 5 Inch Tan Quad Gauge Set
    Omega Kustom 222025 1947-1953 Chevy Pickup 5 Inch Tan Quad Gauge Set
    x
                

    These 5" Omega Kustom Chevy truck gauges are the perfect finishing touch for your truck. They have a programmable electric speedometer and a quad gauge with fuel level, oil pressure, water temperature, and voltage. Each set includes sending units and a GM style speedometer sender. Works with 12 volt systems ONLY.

    The housing measures 4-1/2" and the outside bezel measures 4-11/16".

    Chevy Pickup Gauge Wiring Instructions (PDF)

    Note: Fuel sending unit is the 5-bolt 240 ohm empty, 33 ohm full universal style, NOT the factory original style.

  • Walker Z-AC514-1 Z-Series 1954 Chevy Pick-Up Radiator w/ A/C Condenser
    Walker Z-AC514-1 Z-Series 1954 Chevy Pick-Up Radiator w/ A/C Condenser
    x
                

    We offer Walker Z-Series radiators for 1947-59 Chevy pick-ups with or without air conditioner condenser. They have the top neck centered while the lower is on the right.

    1947-1954 use 820-70 fan shroud. 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • 1955-1959 Chevy Stepside Pickup LED Tail Light Conversion Lens
    1955-1959 Chevy Stepside Pickup LED Tail Light Conversion Lens
    x
                

    Convert your 1955-1959 Chevy Pickup Truck's dim tail lights to powerful LED light. Kit converts your housing to LED by simply replacing the lens and plugging into the 1157 socket. For 12V systems.

    • 41 Super Bright Red LEDs
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics
    • 1157 socket
    Works with Chevy Step side trucks.  Does NOT work with a Fleetside truck.
  • Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    Ididit 1130651020 1947-54 GM Pickup Tilt Column with Shifter, Chrome
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Ididit 1120651010 1947-54 GM Pickup Tilt Column Only, Plain
    Ididit 1120651010 1947-54 GM Pickup Tilt Column Only, Plain
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
            
  • Ididit 1120651020 1947-54 GM Pick-up Tilt Column Only, Chrome
    Ididit 1120651020 1947-54 GM Pick-up Tilt Column Only, Chrome
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249. 
            
  • 1947-59 Chevy Half-Ton Pickup King Pin Set
    1947-59 Chevy Half-Ton Pickup King Pin Set
    x
                

    Odds are the kingpins on your old half-ton Chevy truck are shot. These new kingpin sets include the parts you need to tighten up the old girl again.

    910-32130 Instructions (PDF)

  • 1947-54 Chevy Truck Power Steering Kit
    1947-54 Chevy Truck Power Steering Kit
    x
                

    This kit lets you install a 1969-87 Chevy 2WD power steering box with a 13/16"-36 spline input shaft in your 1947-54 Chevy pickup. Included are the pitman arm, steering arm, drag link, collapsible steering shaft and hardware. Welding required.

    These kits come with spacers and mounting tabs that are welded to the frame of the pickup to mount the steering box. The original steering column will require alteration and must be welded to the collapsible shaft included in the kit.

    910-32132 Instructions (PDF)

  • Ididit 1130651010 1947-54 GM Pick-up Tilt Column with Shifter, Plain
    Ididit 1130651010 1947-54 GM Pick-up Tilt Column with Shifter, Plain
    x
                Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.
            
  • Walker Z-514-1 Z-Series 1954 Chevy Pick-Up Radiator
    Walker Z-514-1 Z-Series 1954 Chevy Pick-Up Radiator
    x
                

    We offer Walker Z-Series radiators for 1947-59 Chevy pick-ups with or without air conditioner condenser. They have the top neck centered while the lower is on the right.

    1947-1954 use 820-70 fan shroud. 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • 1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion
    1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion
    x
                

    If you want to keep your original drum brakes on your favorite truck, we have you covered. The original came with ball-type wheel bearings and if you can find them, they are very expensive. Upgrading to modern tapered bearings is the only way to go. Tapered bearings disperse heat better and can deal with today’s grooved roads and modern wheels and tires much better than the original ball type.

    • Kit 916-31952 includes two inner and two outer wheel bearings, race, and two seals.
  • BedWood Wood Kit for 1954-55 Chevy 3600 LWB Stepside Pickup
    BedWood Wood Kit for 1954-55 Chevy 3600 LWB Stepside Pickup
    x
                

    These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

    • Bed Wood - Non-Drilled
    • Kiln Dried Ash Machined & Sanded
    • Designed for 1954-55 Chevy 3600 LWB Stepside
    • Made in Kentucky, U.S.A.
    • Choice of Red Oak, White Oak, or Walnut
    • Precision milled to 3/4" thick
    • Bed Size: 89" Length x 50" Width
    • Board Qty: 8
    • Bed Strip Qty Needed: 7

    Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

Goto Previous PagePrevious Page
1 2 3