Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1939 ford flathead" Page 1 of 8

  • 1939-53 Flathead Ford Rotating Assembly, 286 C.I.
    1939-53 Flathead Ford Rotating Assembly, 286 C.I.
    x
                

    These 1939-53 flathead stroker kit rotating assemblies feature new Scat crankshafts, new Scat H-beam connecting rods with 2" journals, Ross forged three-ring pistons, rod bearings, and piston rings. The components are balanced and ready for you to assemble.

    Main bearings sold separately. If you have a '39-'48 engine you will need a set of 9101535-STD main bearings. A '49-'53 engine will require a set of 9101536-STD main bearings.

  • 1939-1948 Flathead Main Bearings
    1939-1948 Flathead Main Bearings
    x
                

    Speedway Motors has all the parts you need to rebuild your Flathead Ford V8, including these high quality main bearings. Precision machined to the high standards demanded by today's rodders and restorers, these bearings for 1939-1948 "59A" Flatheads are available in standard size, .010-, .020 or .030-inch oversize.

  • Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 3.75 Stroke, 3.248 Bore
    Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 3.75 Stroke, 3.248 Bore
    x
                

    Original Flathead pistons used four rings, were somewhat round, had questionable wrist pins and locks and were made of cast iron. These pressure-cast aluminum pistons share the four-ring design, but are cam ground and use modern steel wrist pins and real snap rings. They’re a great upgrade when rebuilding your 1939-1953 flathead Ford or Mercury V8 engine.

    The original bore size was 3.188", which makes these .060" oversize. Sold in sets of eight.

    • Original 4-ring design
    • Pressure cast aluminum construction provides great strength and durability
    • Precision cam ground
    • Modern steel wrist pins
    • Snap ring style retainer clips
  • Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 4.00 Stroke, 3.248 Bore
    Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 4.00 Stroke, 3.248 Bore
    x
                

    Original Flathead pistons used four rings, were somewhat round, had questionable wrist pins and locks and were made of cast iron. These pressure-cast aluminum pistons share the four-ring design, but are cam ground and use modern steel wrist pins and real snap rings. They’re a great upgrade when rebuilding your 1939-1953 flathead Ford or Mercury V8 engine.

    • Original 4-ring design
    • Pressure cast aluminum construction provides great strength and durability
    • Precision cam ground
    • Modern steel wrist pins
    • Snap ring style retainer clips

    The original bore size was 3.188", which makes these .060" oversize. Sold in sets of eight.

  • Offenhauser Flathead Cylinder Head Stud Kit
    Offenhauser Flathead Cylinder Head Stud Kit
    x
                

    Highly recommended for all 1939-53 Flathead Ford/Mercury with aluminum heads. Flathead decks are thin and their threads are easily stripped. The outer end of these Grade 8 studs have fine threads and with the hardened washers (included) which prevent galling and ensure accurate torque readings.

    Full set of head studs, nuts and washers for one engine. Specify year of engine: 1939-48 or 1949-53.

    560-13953 Instructions (PDF)

  • 1939-53 Flathead Ford Rotating Assembly, 274 C.I.
    1939-53 Flathead Ford Rotating Assembly, 274 C.I.
    x
                

    These 1939-53 flathead stroker kit rotating assemblies feature new Scat crankshafts, new Scat H-beam connecting rods with 2" journals, Ross forged three-ring pistons, rod bearings, and piston rings. The components are balanced and ready for you to assemble.

    Main bearings sold separately. If you have a '39-'48 engine you will need a set of 9101535-STD main bearings. A '49-'53 engine will require a set of 9101536-STD main bearings.

  • Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 3.75 Stroke, 3.313 Bore
    Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 3.75 Stroke, 3.313 Bore
    x
                

    Original Flathead pistons used four rings, were somewhat round, had questionable wrist pins and locks and were made of cast iron. These pressure-cast aluminum pistons share the four-ring design, but are cam ground and use modern steel wrist pins and real snap rings. They’re a great upgrade when rebuilding your 1939-1953 flathead Ford or Mercury V8 engine.

    • Original 4-ring design
    • Pressure cast aluminum construction provides great strength and durability
    • Precision cam ground
    • Modern steel wrist pins
    • Snap ring style retainer clips

    The original bore size was 3.188", which makes these .125" oversize. Sold in sets of eight.

  • Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 4.00 Stroke, 3.313 Bore
    Offenhauser 1939-53 Flathead Ford 4-Ring Pistons, 4.00 Stroke, 3.313 Bore
    x
                

    Original Flathead pistons used four rings, were somewhat round, had questionable wrist pins and locks and were made of cast iron. These pressure-cast aluminum pistons share the four-ring design, but are cam ground and use modern steel wrist pins and real snap rings. They’re a great upgrade when rebuilding your 1939-1953 flathead Ford or Mercury V8 engine.

    • Original 4-ring design
    • Pressure cast aluminum construction provides great strength and durability
    • Precision cam ground
    • Modern steel wrist pins
    • Snap ring style retainer clips

    The original bore size was 3.188", which makes these .125" oversize. Sold in sets of eight.

  • Powergen 1939-48 Flathead Ford One Wire Alternator, 12 Volt
    Powergen 1939-48 Flathead Ford One Wire Alternator, 12 Volt
    x
                

    If you like traditional looks and modern performance, you’re gonna love this cool Flathead 1-wire alternator. It has the look of an original generator, but is really a 12-volt, negative-ground alternator that produces 60 amps at idle and 75 amps going down the road.

    Designed to fit 1939-1948 Ford & Mercury Cars and 1939-1947 Ford Trucks with Flathead V8s. These feature a simple one-wire hookup and are available in black or polished aluminum.

    • Retains original generator appearance
    • Easy one-wire hookup
    • 60 amps at idle
    • 75 amps at road speed
    • Uses stock mounting bracket
    • Includes pulley for 5/8" wide belt
    • Pulleys for 3/8" wide belt available seperately

    Flathead Ford One Wire Alternator Instructions (PDF)

    Powergen Cutaway View (Link) 

  • 1939-1948 Ford Flathead Generator Cover, 1-Hole, Stainless
    1939-1948 Ford Flathead Generator Cover, 1-Hole, Stainless
    x
                

    Dress up your Flathead generater without spending a lot of dough. Speedway's stainless steel generater cover is easy to install and is a sure way to add a little flash to your detailed Flattie. The cover has one hole to fit over the wire connector screw on the side of your generator.

    • 1939-1948 Flathead Ford V8s
    • For use with OEM flathead generators that have one wire hole
    • Beautiful and durable polished stainless steel
  • 1939-48 Ford Flathead Engine Rod Bearings, 2.138 Inch Journal Floating Type
    1939-48 Ford Flathead Engine Rod Bearings, 2.138 Inch Journal Floating Type
    x
                

    These engine rod bearings are what you need for building that Flathead Ford stroker.  They are 2.138" journal floating rod bearings, designed for use with 1939-1948 Ford Flatheads.

    • 1939-1948 Ford Flatheads
    • 2.138" journal floating rod bearings
    • Choose either standard size(STD), .010", .020", or .030" bearings

     

  • Flathead Ford V8 Rear Camshaft Oil Pump Drive Gear
    Flathead Ford V8 Rear Camshaft Oil Pump Drive Gear
    x
                

    Speedway Motors is your Flathead Ford specialist! We've got you covered down to the smallest components, like this replacement oil pump drive gear. This gear fits on the rear of the camshaft and drives the oil pump. It's designed to fit 1949-1953 engines with D-shaped cam snouts, but can also be used on 1932-1948 style engines by modifying the cam's rear snout.

    • Rear camshaft gear for oil pump drive 
    • Made specifically for 1949-1953 Flathead Ford V-8 cams with D shape
    • Can be used on 1932-1948 engines by modifying the shape of the rear snout of the camshaft
  • 1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    1939-1941 Flathead Ford V8 Radiator Hose Dress-Up Kits
    x
                

    Dress up your flathead by replacing your original cylinder head-to-radiator hoses with these stainless or chrome plated pieces. Each radiator hose dress kit replaces both upper hoses on a flathead Ford V8 and includes two chrome or stainless tubes, four rubber connector hoses, and eight stainless steel hose clamps. This is a quick and easy way to add some sparkle to your engine compartment.

    • Available with polished stainless steel or quality chrome-plated tubes
    • Strong three-ply rubber hose connectors
    • Attractive stainless steel hose clamps
    • Easy installation
  • 1939-53 Flathead Ford Rotating Assembly, 304 C.I.
    1939-53 Flathead Ford Rotating Assembly, 304 C.I.
    x
                

    These 1939-53 flathead stroker kit rotating assemblies feature new Scat crankshafts, new Scat H-beam connecting rods with 2" journals, Ross forged three-ring pistons, rod bearings, and piston rings. The components are balanced and ready for you to assemble.

    Main bearings sold separately. If you have a '39-'48 engine you will need a set of 9101535-STD main bearings. A '49-'53 engine will require a set of 9101536-STD main bearings.

  • Best Gasket 1939-48 Ford Flathead Short Block Gasket Set
    Best Gasket 1939-48 Ford Flathead Short Block Gasket Set
    x
                

    BESTgasket is the world's premier manufacturer of gaskets for vintage and classic American cars and trucks.  These quality gasket sets are for use with 1939-48 Ford Flathead V-8 engines.

    Includes:

    • Oil pan gasket
    • Improved "rope" rear main seal
    • Drain plug gasket
    • Oil pump gasket
    • Oil pump idler cover gasket
    • Water pump gaskets
    • Front cover gasket
    • Distributor gasket
    • Fuel pump stand gasket
  • ARP Premium Rod Nuts for Flathead Ford V8
    ARP Premium Rod Nuts for Flathead Ford V8
    x
                

    Repeated torquing of your rod nuts fatigues the threads. Don't take a chance – replace your Flathead Ford V8's old fasteners with the superior strength and quality of ARP rod nuts. ARP specialty hardware can be found in NASCAR, NHRA and IndyCar racing applications, so you can be sure it's strong enough for your flathead.

    • Rolled threads, high strength steel, and black oxide finish  
    • A must when you rebuild your Flathead
    • Castle nut design may differ slightly in appearance from OEM
    • Fits '32-'53 Ford/Mercury V-8 engines using standard 3/8" rod bolts
    • Original flathead bolts are non-serviceable and must be reused
    • Set/16 nuts
  • Powergen 1939-48 Flathead Ford One Wire Alternator, 6 Volt
    Powergen 1939-48 Flathead Ford One Wire Alternator, 6 Volt
    x
                

    If you like traditional looks and modern performance, you’re gonna love this cool Flathead 1-wire alternator. It has the look of an original generator, but is really a 6-volt, positive-ground alternator that produces 60 amps at idle and 75 amps going down the road.

    Designed to fit 1939-1948 Ford & Mercury Cars and 1939-1947 Ford Trucks with Flathead V8s. These feature a simple one-wire hookup and are available in black or polished aluminum.

    • Retains original generator appearance
    • Easy one-wire hookup
    • 60 amps at idle
    • 75 amps at road speed
    • Uses stock mounting bracket
    • Includes pulley for 5/8" wide belt
    • Pulleys for 3/8" wide belt available seperately

    910-67172 Instructions (PDF)

  • OTB Gear 6900 1939-48 Ford PowerGen Finned Alternator Cover, Polished
    OTB Gear 6900 1939-48 Ford PowerGen Finned Alternator Cover, Polished
    x
                Impressive finned cover to dress up your '39 - '48  Ford style PowerGen alternator. Cast in A-356 aircraft aluminum alloy  here in the USA, and polished to show quality standards. Simply slides  on and secures with 2 set screws on the bottom. This is a quick upgrade  to change your alternator from boring to cool!... Also available in  unpolished finish. Sorry, this item will not fit the original Ford  generator, which has the wire poles on the side of the case. 
    • Polished
    • Fits flathead PowerGen
    • Secures with 2 set screws
    • Will not fit original Ford generator
  • Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    Fel-Pro Gaskets FS7548B 1939-1948 Flathead V8 Overhaul Gasket Set
    x
                

    You can't overhaul your Flathead without new gaskets. This overhaul gasket set is for 1939-48 Ford and Mercury V8 and comes complete with all the necessary gaskets and seals you need for a typical engine rebuild.

    Includes modern composition head gaskets. The head gaskets will fit bores up to 3-3/16".

    Kit includes the following gaskets:

    • Cylinder Heads
    • Oil Pan
    • Rear Seal
    • Water Pump
    • Front Packing
    • Fuel Pump
    • Water Neck
    • Timing Cover
    • Valve Seals
    • Intake and Exhaust Gaskets

     

  • ARP Main Bolts for Flathead Ford V8
    ARP Main Bolts for Flathead Ford V8
    x
                

    Your flathead Ford V8 is how many years old now? And you're thinking about reusing the main cap bolts? Forget it!

    Years of service and re-torquing have undoubtedly fatigued your engine's original fasteners, so save yourself some grief by replacing them with new main cap bolts from ARP, the leader in automotive fastener technology. Sold in sets of six, these bolts have special washers and the strength you need to keep that Flathead together for decades to come.

    • The industry standard for automotive fasteners
    • Rolled threads, black oxide finish, ultra high tensile strength
    • Each kit consists of six (6) bolts and hardened washers
  • Flathead Ford Heat Treated Valve Guides
    Flathead Ford Heat Treated Valve Guides
    x
                

    The Flathead was designed to run on fuel with high levels of lead, but even with leaded fuel, the stock valves will eventually hammer the seats out, which will close up the valve lash and leave your valves hanging open...that is if you don't seize a valve to the guides first!

    Remember what year your engine was built and how fatigued the valve train components are. Henry may have built them right with the technology he had available then, but this is now and we have the modern components you need.

    These Flathead Ford valve guides are heat treated to be compatible with today's low-lead fuels. Fits 1932-53 engines. If using in a 1932-48 engine, you will have to use 1949-53 style retainers, keepers and valves.

    Flathead Valve Assembly (Link)

  • Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" clutch discs for the flathead V8. They replace 10" OEM with a 11-5/8" bolt circle.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T-5  transmission conversions.

    Flathead 10 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

     

  • Flathead 10-1/2 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    Flathead 10-1/2 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10-1/2" clutch discs for the flathead V8.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T-5  transmission conversions.

    Flathead 10-1/2 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

  • Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    Flathead Ford No-Lead Hardened Valve Seat, Exhaust
    x
                

    The flathead Ford V8 was designed to run on fuel with high levels of lead, but even with leaded fuel, the stock valves will eventually hammer the seats out, which will close up the valve lash and leave your valves hanging open...that is if you don't seize a valve to the guides first!

    Remember what year your engine was built and how fatigued the valve train components are. Henry may have built them right with the technology he had available then, but this is now and we have the modern components you need.

    These 0.060 oversize valve seats are made of a specially hardened material to combat the effect of unleaded fuel and higher performance. Machine work is required for installation. Intake has a 30° seat and exhaust has a 45° seat.

    Flathead Valve Assembly (Link)

  • 1939-48 Ford Flathead Main Cap Support
    1939-48 Ford Flathead Main Cap Support
    x
                If you're building a serious flathead for either street or racing, you need one of these flathead main cap supports. These supports include the support strap, spacers and new bolts for the center main cap. It adds an incredible amount of strength to the lower end. Can also be used on the front main cap but pan modification is required. Requires no machine work.
            
  • Isky Racing Cams F85-02 Adjustable Flathead Ford Lifters
    Isky Racing Cams F85-02 Adjustable Flathead Ford Lifters
    x
                

    Isky's adjustable lifters are the preferred way to maintain critical valve train tolerances while avoiding the hassle of grinding your valve seats for clearance. Simply set your valve lash using the adjustable set screw.

    Made in the USA. Fits 1932-53 Ford and Mercury Flathead V8s.

  • Flathead Cylinder Head Stud Kit
    Flathead Cylinder Head Stud Kit
    x
                

    Performance engine builders know that head studs are superior to bolts, and this is especially the case on Flathead Ford and Mercury V8s. Flathead decks are thin and their threads are easily stripped. By installing studs, you avoid damaging the threads in the block through repeated use. The combination of the studs' fine outer threads and hardened washers also prevents galling and ensures accurate torque readings, particularly on aluminum heads.

    • Studs utilize superior "pull down torque"
    • Properly fastens and torques both aluminum and iron heads

    910-15310 Instructions (PDF)

  • Hastings VA101 Isky Flathead Ford Valve Spring Shims
    Hastings VA101 Isky Flathead Ford Valve Spring Shims
    x
                

    These Hastings valve spring shims are designed for use with our single valve springs (450185G).  These shims will help you achieve the correct installed height for your valve springs when rebuilding Flathead Ford engines.

    • 0.060" thick
    • Designed for use with 185G springs
    • Allows for correct valve spring height
    • Set of 16 shims
  • Offenhauser Flathead Ford Pressure Tester Kit
    Offenhauser Flathead Ford Pressure Tester Kit
    x
                

    If you have built a Flathead Ford, you know the odds of the block being cracked are pretty high. Plus the cost of cleaning and magnafluxing keeps going up. This kit allows you to pressure test one cylinder bank at a time to detect cracks or holes in your own garage. Includes regulator head plate, water pump plates and hardware. For 24 stud Flathead Fords only.

    Flathead Block Pressure Testing Instructions 

  • 1932-1953 Flathead Ford V8 Single Valve Springs
    1932-1953 Flathead Ford V8 Single Valve Springs
    x
                

    Our complete line of valve train parts to help your flathead Ford V8 run on unleaded fuel. These heavy duty single valve springs are made from top-quality chrome silicon steel and are designed to work with stock 1932-1953 Ford retainers. 

    • Recommended for most street performance 1932-53 Ford/Mercury Flathead V8s
    • Chrome silicon material delivers reliable performance
    • Proper seat pressure for most street and street/strip Flathead cams
    • Installed Height:  2.00"
    • Seat Pressure:  85 lbs @ 2.00" installed height

    Note: "Full Race" cams should be paired with our 450-4005 dual valve springs.

    Flathead Valve Assembly (Link)

     

  • Plain 1946-1953 Flathead Alternator Bracket
    Plain 1946-1953 Flathead Alternator Bracket
    x
                

    Just because you've got a vintage Flathead Ford V8 in your ride doesn't mean you're stuck with the antiquated charging system. Switching to a tried-and-true GM 1-wire alternator is a great upgrade for any Flathead-equipped vehicle with a 12-volt electrical system.

    • Bracket fits 1946-1953 V-8 engines
    • Heavy-duty steel construction
    • Can easily be painted to match your engine
    • Designed to work with the two narrow-belt drive system typical of late '50-'53 Ford/Mercury passenger cars
    • Will not work with single wide belts unless the alternator is modified (see Notes)

    Mounting Guide (Link)

  • 1932-1953 Flathead Ford Single Valve Spring Retainers
    1932-1953 Flathead Ford Single Valve Spring Retainers
    x
                

    Things have changed considerably since the first Ford Flathead V8s were built more than 75 years ago, and Speedway Motors has the valve train parts you need to keep these vintage engines running on modern unleaded fuel.

    Single spring retainers for use with single-style valve springs. Fits 1932-1953 Ford and Mercury Flathead V8s.

    Flathead Valve Assembly (Link)

  • Offenhauser Flathead Ford Early to Late Drive Gear
    Offenhauser Flathead Ford Early to Late Drive Gear
    x
                

    Allows the use of early ('32-'48) camshaft with late ('49-'53) timing cover.

  • Hastings Rings SWY5075125 Flathead Ford 3-Ring Piston Set, 3.3125 Bore
    Hastings Rings SWY5075125 Flathead Ford 3-Ring Piston Set, 3.3125 Bore
    x
                

    Hastings is the ring of choice for your vintage flathead Ford V-8. We have these premium 3-ring sets with 5/64" cast top, 5/64" cast second, and 3/16" chrome-edge oil ring. 

    Each ring set includes all rings for (8) pistons.

  • 1932-1948 Flathead Ford V8 Crankcase Breathers
    1932-1948 Flathead Ford V8 Crankcase Breathers
    x
                

    Replace the plugged-up, oil soaked and decayed original crankcase breather on your Flathead Ford V8 with this top-quality new one. This original style breather is available with a black baked enamel or bright chrome finish. It fits 1932-48 Flatheads.

    • OEM-style design and construction
    • Available in black baked enamel or chrome finish
    • Fits 1932-48 Ford Flathead V8 engines
  • Walker Z-495-1-FH Flathead V8 1937-1939 Ford Standard Radiator
    Walker Z-495-1-FH Flathead V8 1937-1939 Ford Standard Radiator
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with  bored,  high compression, and supercharged Flathead engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Works with original, reproduction steel, or fiberglass grille shells.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install
    • Top Inlet: Left and Right
    • Bottom Outlet: Left and  Right

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   

  • Rings for Offenhauser 4-Ring Flathead Ford Pistons, 3.248 bore
    Rings for Offenhauser 4-Ring Flathead Ford Pistons, 3.248 bore
    x
                

    The original bore size was 3.188", which makes these .060" oversize.

  • Flathead 10 Inch Long-Style Clutch Pressure Plate
    Flathead 10 Inch Long-Style Clutch Pressure Plate
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" Long-style pressure plates for the flathead V8. This pressure plate has a 6 bolt pattern divided up into 3 groups of 2 with a 3.125” center-to-center.

    Pressure plate bolt pattern must match your flywheel!

    T-5 and Adapter Tech Tips (Link)

  • 1939-53 Flathead Ford V8 4-Ring Pistons, 4 Inch Stroke, .060 Over
    1939-53 Flathead Ford V8 4-Ring Pistons, 4 Inch Stroke, .060 Over
    x
                

    Original flathead pistons used four rings, were somewhat round, had questionable wrist pins and locks and were made of cast iron. These pressure-cast aluminum pistons share the four-ring design, but are cam ground and use modern steel wrist pins and real snap rings. They’re a great upgrade when rebuilding your 1939-1953 flathead Ford or Mercury V8 engine.

    • Original 4-ring design
    • Pressure cast aluminum construction provides great strength and durability
    • Precision cam ground
    • Modern steel wrist pins
    • Snap ring style retainer clips

    Sizing based on original 3.188" bore. Fits .060" overbore size and 4" stroke crank. Sold as a set of 8.

  • Flathead Ford V8 Stainless Steel Valves, Exhaust
    Flathead Ford V8 Stainless Steel Valves, Exhaust
    x
                

    These flathead Ford V8 stainless steel valves are made of hi-grade 4N stainless. Each valve is 0.060 oversize and has an optimized seat angle and boasts a full machine finish, all of which combine to improve airflow and increase horsepower. The intake has a 30° seat and the exhaust has a 45° seat.

    Fits 1932-1953 engines.

    Flathead Valve Assembly (Link)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8