Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1927 filler cap" Page 1 of 1

  • Model T Filler Neck, Chrome
    $39.99
    Model T Filler Neck, Chrome
    x
                

    1917-1927 Model T style radiator filler neck designed for use with hex radiator caps or dog bone radiator caps. Solder it onto your radiator or secure it with a long bolt through the center of the grille shell.

    • Base is 2.935"
    • Height is 2.5"

    NOTE: Gull wing caps (91112206, 91112207, 91112208, and 91112209) do not fit these Model T Filler Necks.

  • Model T Dog Bone Radiator Cap, Chrome, Drilled
    Model T Dog Bone Radiator Cap, Chrome, Drilled
    x
                These Dog Bone caps are a reproduction of an original aftermarket  accessory that were available during the Model T era. These cast chrome  caps have a hole drilled in them for use with Jr. Moto-Meters and are 6-1/2”  long. The Dog bone style makes removing your radiator cap easier by  giving you a more convenient area to grip and to twist turn the hot cap,  as the  arms are outboard and they cool off in the air. Many people  like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Drilled for Motor Meters
    • Chrome finish

    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

  • Model T Dog Bone Radiator Cap, Chrome, Undrilled
    Model T Dog Bone Radiator Cap, Chrome, Undrilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast chrome caps  are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Undrilled
    • Chrome finish
  • Model T Dog Bone Radiator Cap, Brass, Undrilled
    Model T Dog Bone Radiator Cap, Brass, Undrilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast brass caps are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Undrilled
    • Brass finish
  • Model T Dog Bone Radiator Cap, Brass, Drilled
    Model T Dog Bone Radiator Cap, Brass, Drilled
    x
                

    These Dog Bone caps are a reproduction of an original aftermarket accessory that were available during the Model T era. These cast brass caps have a hole drilled in them for use with Jr. Moto-Meters and are 6-1/2” long. The Dog bone style makes removing your radiator cap easier by giving you a more convenient area to grip and to twist turn the hot cap, as the arms are outboard and they cool off in the air. Many people like using it to add some style to your Model T.

    Model T Dog Bone Radiator Cap

    • Fits 1909-1927 Ford Model T radiators
    • Screws into stock filler necks
    • 6-1/2" long (end to end)
    • Drilled for Motor Meters
    • Brass finish
  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    Walker C-481-2 Cobra 1924-1927 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker Z-481-2 Z-Series 1924-27 Ford Model T Radiator for Chevy Engine
    Walker Z-481-2 Z-Series 1924-27 Ford Model T Radiator for Chevy Engine
    x
                

    Walker Z-Series Ford Model T radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression Chevy engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Works with original, reproduction steel, or fiberglass grille shells
    • Heavy duty 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.