Please enter another search term above or browse our products by selecting from the options on the left.
Browse All Products Page 1 of 25
$79.99$82.25More InfoKing HP Series 1969-Up Small Block Chevy Rod Bearingsx
- Bi-metal aluminum silicon alloy featuring fine micro-bore finish
- Mains and rods are narrowed for large radius crankshafts
- Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM
- 0.015" thick top layer for superior macro particle embedability and conformability
- 40 Vickers hardness to resist overlay migration and extrusion
- 450°F heat threshold for superior protection against friction and overheating
$29.99More InfoSpeedway Fuel Level Gauge with Sender, 2-1/16 Inchx
These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face. The fuel sender comes with seal and and all mounting hardware.
- Overall Diameter: 2.25"
- Overall Length: 9.25"
- Includes sender
- 240 ohms empty, 33 ohms full
- Stainless steel bezel
- Backlit white face
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
$759.99$799.95More InfoAeromotive 18664 Stealth Fuel Cell, 15 Gallonx
Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.
- Includes Stealth 340 LPH in-tank fuel pump
- Works with both carbureted and EFI systems
- Return line provisions
- Two AN8 vents with rollover valves
- Universal 0-90 Ohm fuel level sender
- Standard 12-bolt flush mount lid assembly
- Natural aluminum finish
- Ready to go simple installation
Fuel Pump Flow Chart (GIF)
$59.99More InfoBassett DOT Approved 15 Inch Racing Wheel, 5 on 5, 15 x 7x
If you're an IMCA hobby stock or street stock racer, Bassett's DOT-approved 15 inch racing wheels are for you. They feature the same quality construction and high strength of our Sprint Cup/Nationwide/Camping World Truck Series certified wheel. Bassett DOT wheels are also the lightest on the market at just 23 lbs!
Since the wheels conform to the DOT specifications, they are legal for the street! When outfitting your car or truck with custom wheels, don't settle for lower quality knock-offs. Bassett Racing Wheels are race track tough.
Available in a 5 on 5" bolt circle pattern with a 3" or 3-5/8" backspace. Silver finish.
These wheels accept 5/8" studs.
Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.
$174.99$179.95More InfoAeromotive 11140 340 Stealth Fuel Pump, Centered Inletx
The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.
What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.
- Fits most vehicles where popular aftermarket pumps are applicable
- Designed for in-tank use only
- Can be used in carbureted or EFI applications
- Turbine pump mechanism increases durability and can be used in pulse modulated applications
910-11140 Instructions (PDF)
$1,585.99More InfoFrench Grimes Racesaver Sprint 305 Chevy Brodix Cylinder Headsx
- Racesaver Sprint Series spec Brodix cylinder heads
- Fully assembled
- Heads are certified serial numbered
- Ready and legal for use on a 305 c.i. Racesaver engine
$10.99$14.99More InfoCON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tallx
This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.
$6.99$7.99More InfoSpeedway Extreme Gaskets, 2-1/2 Inch Collector Gasketsx
- Reusable triple-layer gasket
- Stainless steel with a heat-resistant, rubber-based inner core
- 0.085” thick, ultra pliable
- Easily conforms to surface irregularities to create a tight, leak-proof seal
$149.99More InfoWinters Performance 6746 Quick Change Standard Rear Coverx
- Standard rear cover
- Complete with bearings
FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.
FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.
Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.
FlatStoppers won't scratch or otherwise damage floors, and won't rust.
$14.99$19.97More InfoTitan Tools 51503 Mini Tubing Benderx
- Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
- Use with Brass, Copper, Steel, or Aluminum
- Compact for limited accessibility applications
Russell 670350 Fuel Pressure T-Off Fitting -8 AN Male - Female 1/8 NPTx
Fuel pressure take off fittings with 1/8" NPT side port.
- Precision machined to ensure precise thread engagement
- Lightweight aluminum fittings are designed to match up with all AN performance hose and hose ends
- 37° sealing angle guarantees a positive seal at maximum operating pressures
- Lets you plumb your wing slider cylinder line into the power steering
- Cleans up cockpit
- Lightweight, strong construction
- Used on sprint cars to plumb wing slider cylinder line into power steering
- Anodized aluminum
- AN 8 male on one end; AN 8 female on other
- 1/8” NPT port for plumbing wing slider cylinder line
Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$29.99More InfoQA1 1210-505 Repl Housing for K772 Style 721-10105 Upper Ball Jointx
For a variety of racing applications, QA1's Screw-In Style Ultimate Ball Joint is a great choice. This patented, self-lubricating design is 100% owner rebuildable and is exclusive to QA1.
- 1968-1989 Chrysler
$85.99More InfoBSB Manufacturing 6650 6650 5 Inch Coilover Kitx
- For Bilstein or QA1 shocks utilizing 5" OD springs
- Threaded tube has scale on both sides for easy and fast setting
- Slotted top cup with quick release for fast spring changes
- Cross pin allows for easy adjustment
$24.99More Info2-1/2 Inch Rear Spring Shacklesx
- For 2.5" wide leaf springs
- 1" bushing
- 2.5" center to center
- Sold as a pair
$7.99More Info3/8 X 3/8 Clevisx
The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115).
$5.99More InfoSwindell Series Sprint Car Set-Up Sheetsx
- Can be used if running a 305, 360 or 410 sprint car
- 1 tablet contains 50 sheets
- Easily organize your set-up notes for each race
- Gives you a permanent record of every adjustment and set-up
- Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
$4.99More InfoSpeedway Tire Coaster Setx
- Made from 100% recycled tire rubber
- Set of four
- Four distinct designs in each set
- Vintage Sprint Mag
- Kustom Cross-bar Flipper Cap
- D-hole Stock Car Wheel
- Redline 5 Spoke Mag
$35.99More InfoWillys Carbs WCD251 2-Barrel Throttle Stop, Return Spring Bracketx
- Fits 4412 style 2 bbl. carburetors
- Throttle stop and return spring bracket all in one
$324.99More InfoBare 60 Inch Centered 9 Inch Ford Housingx
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle. Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.
Third member sold separately.
$10.99More InfoWinters Performance 4043 Shurloc Sprint Shifter Cable Bracketx
This shifter cable bracket is for use with the Winters Sure-Lock shifter for a precise fit. It is simple to install and complete with bolts and spacers.
- Shifter bracket kit for Shurloc sprint shifter (part number; 910-55000)
- Includes 2 bolts, 2 spacers and 1 bracket
$239.99More InfoDeluxe 45 Degree Brake Flaring Toolx
- Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
- For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
- Turret-style design allows you to make those precision flares in minimal time
- All the brake-flaring forming dies you need are mounted right on the turret
- T-handle screw clamp securely holds your line in place during forming
- Packaged in a blow-molded case
Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.
$399.99More InfoDougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inchx
These rugged Doug's Headers electric exhaust cutouts allow you to convert to a wide-open, unobstructed exhaust system with the flip of a dash-mounted switch. Doug's electric exhaust cutouts are built to last; they feature full stainless steel construction with a heavy-duty Dayton gear reduction rack and pinion electric drive mechanism. Best of all, these cutouts use a self-cleaning, knife-edge seat for a leakproof seal every time, whether open or closed. Doug's Headers electric exhaust cutouts include a pre-wired harness, a toggle switch, and fuses for an easy installation.
- 3.000 in.
- Stainless steel
- Sold as a pair
- Includes wiring harness
Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage Systemx
Durable, all-steel construction will not warp, fray or crack. Attractive, scratch resistant, baked-on powder coat finish wipes clean for long-lasting beauty for any shop or work area. Installation is easy and absolutely no framework is required.
- 32" tall x 32" wide x 3/4" deep
- Pack of two
- Durable and versatile
- 20 gauge steel with a baked-on rust and scratch resistant finish
- Slotted to accept Wall Control accessories
- Holes accept conventional 1/4" peg hooks
- Choose from blue, grey, red, white, or galvanized steel
$69.99More InfoSpeedway Electric Speedometer, 3-3/8 Inch Diameterx
These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring. Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit.
- 3-3/8” body diameter
- 3-3/4 ” bezel
- Overall Diameter: 3-3/4"
- Body Length: 1.60"
- Stud Length: 1.00"
- Backlit white face with black lettering
- Orange needle
- 0-160 mph range
- Stainless steel bezel
- Includes installation kit
- SENDER NOT Included
$14.99$19.99More InfoDura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardwarex
- (4) Head Dowels
- (2) Timing Cover Dowles
- (3) Cam Bolts
- (1) Cam Lock Plate
- (2) Oil Filter Adaptor Bolts
- (1) Long Woodruff Key
- (2) Short Woodruff Keys
- (2) Transmission Dowels
$26.99More InfoMaradyne Fans MFA114 Nylon Flex Fan, 14 Inchx
One-piece nylon flex fan with reinforced construction for use up to 8000 RPM. Lightweight design (only 12 oz.) relieves stress on your water pump and bearings. Patented S-blade design provides maximum cooling and is ideal for race applications where weight is a concern.
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
$279.99$299.99More Info1934 Ford Car Bumperx
- Fits both front and rear
- 26 inches between bolts
$999.99More InfoLongacre Accuset II Scale Kitx
- Push one button for all 4 wheel weights plus cross weight
- Push a second button for all partial %
- Baseline memory recall
- Heavy duty red HiFlex cables with billet AN connectors
- 4 LMF™ swirl finished 15" x 15" low profile pads
- 1500 lb. per pad capacity, 6000 lb. total
- 2-year limited warranty
- Includes FREE scale pad box
- Push one button for all 4 wheel weights plus cross weight
$5.99More InfoMolecule Labs MLRE4 Refresh Spray - 4ozx
Keeps suits and helmets fresh over long racing weekends and between washings. Contains an anti-microbial agent to inhibit the growth of bacterial odors.
- Reduces odors on all types of technical fabrics
- Contains an antimicrobial agent to inhibit the growth of bacterial odors
- Maintains fabric breathability
- Cosmetic-grade, skin-friendly ingredients
- Light fresh scent
- Recommended for Nomex and other technical fabrics
Learn how to properly clean and maintain your racing suit by reading our tech article. Racing Suit Cleaning and Care.
$91.99More InfoAFCO 200036 Camaro Roller Bearing Leaf Spring Sliderx
- Use in place of leaf spring shackles
- Roller bearing design prevents binding
- Frees up car during suspnesion movement
- Pre-drilled holes for bolt-on application
- Designed specifically for Camaro oval track racing leaf springs
$84.99More InfoLongacre 46545 Stepper Motor Racing Gauge, Water Tempx
The next generation in instrumentation
- Use a small electronic motor that only turns a tiny fraction of a rotation to drive the pointer
- More precise than the traditional mechanical instruments
- Molded polycarbonate / ABS case
- An electronic sensor is installed on the motor to drive the gauge - no oil or fuel in the driver’s compartment for added safety
- Thru-the-dial LED backlights
- Illuminated pointer
- Quick & simple to install
- 100-280 deg.
- 2 set points are easily adjusted to your needs
- 1st set point: LED illuminates
- 2nd set point: LED flashes
- 3rd set point: LED and gauge backlight flash
$224.99More InfoOTB Gear 6870 Finned Cover For Round Back 9 Inch Rearend, Polishedx
The perfect cure for the boring pumpkin. The sturdy and popular Ford 9" rearend needs a little work to look stylish... at least thats what we thought. This new cover is cast in A356 aircraft grade alloy and available in a highly polished finish. No hardware is needed to attach - we provide a generous supply of high temperature adhesive (600 degree).
- Excellent compliment to the new & improved Speedway 9" housing (910-46100)
- Will fit most factory 9" Ford rear axle housings that have a bulge on the back of the housing for the ring gear, such as our axle # 910-46100 and other similar rear housings
- No hardware is needed to attach
- Generous supply of high temperature adhesive (600 degree) included
- Can be powder coated after assembly
- Will not fit Currie except, CE2000N made prior to September 2009
- Will not fit axle housing used in Speedway #s 910-45100 and 715-700
- Catalog correction, # 338 p# 61 shows the incorrect style of housing that this cover fits
$18.99More InfoARP Fasteners 100-1110 5/16 Inch Head Header Boltsx
- Great for getting the proper torque in tight spaces
- 3/8-16 x 1" threads
- 5/16" hex head
- Set of 16
$4.99More Info1932 Ford Interior Door Escutcheonx
These are used on both the door handles and window crank handles.
- Polished stainless steel
- Inside handle escutcheons for 1932 passenger cars
- Sold Each
$49.99More Info55 Degree Steering Column Mount for T-Bucket KitxThese mounts are the economical mounting solution for T-bucket steering columns. They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
- Mount puts the steering column at a 55 degree angle to the firewall
- Fits all of our deluxe "T" bodies with the floor / firewall installed
- Designed to be used with a 1-3/4" diameter steering column
Stallard Chassis BC6401-503 Micro Sprint Right Rear Steel Torsion Armx
- 5" offset
- Less flex than aluminum arms for better bit
$13.99$23.28More InfoARP Fasteners 200-2807 Chevy Flywheel Bolts, 1 Pc. Rear Mainx
- Fits Chevrolet 90° V6 & 305-502 Chevy V8 with 1-pc rear seal
- Exclusive, flat, 12-point head design
- Larger than stock shank diameter for increased strength and improved flywheel register
- Originally developed for NASCAR Winston Cup competition
- 200,000 psi rating
- Set of 6
$599.99More InfoSpeedway Tribute T-Bucket Interior Kitx
Please view the product's page for more information
$55.99More InfoSpeedway Nomex Racing Gloves-Double Layerx
These nomex gloves are double layer SFI-5 fire resistant rated to ensure your safety during a race. These Speedway driving gloves also feature two layer mid-forearem length with a lined leather palm and hook-and-loop wrist closure. These racing gloves are available in red, blue and black.
- Two-layer mid-forearm gloves with lined leather palm and hook-and-loop wrist closure
- SFI 5 Rated
- Available in Red, Blue or Black
- Sizes S-XXL
Learn more about SFI and TPP Ratings by reading our tech article. What are SFI and TPP Ratings?
1 - 40 of 1000+ Results