Please enter another search term above or browse our products by selecting from the options on the left.
Browse All Products Page 1 of 25
$19.99$26.95More InfoLokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Fordx
Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar! Made from steel and feature a beautiful chrome finish and a textured rubber pad.
$66.99More InfoBassett 47S43S 14X7 D-Hole 4 on 4 3 Inch Backspace Silver Wheelx
Bassett expanded our D-Hole Lightweight line of wheels for FWD and mini-stock cars that use a 4 bolt or 5 bolt pattern hub hat/rotor and run a 14" tire. We combine our NASCAR-proven 8 D-Hole center with a lightweight, CNC spun-form rim shell to create the highest quaility, fastest 14 x 7 and 14 x 8 FWD and mini-stock steel race wheel available. Lightweight and low runout (under .030") thanks to spun-form wheel shells produced in-houseReinforced torque ring and forged coining on center increases durabilityThe 5/8" valve stem hole is located behind the center to avoid clippings NOTE: For easier tire mounting, many of these wheels do not have a tire safety bead. For dirt applications, make sure you select a safety bead at the time of order.PLEASE NOTE: Bassett Racing Wheels are lug-centric, which means the wheel is constructed and trued off of the bolt circle. The center hub bore hole can not be used to balance Bassett Racing Wheels. We recommend using an experienced tire mounter with a bolt pattern adapter plate that allows for balancing off of the bolt circle. Bassett Racing Wheels also require 45 degree chamfer lug nuts.
$19.99More InfoTCI 745504 Midplate Spacer Kit, 1/4 Inch Thickx
TCI® Seven, Eight, Nine and Ten inch Race Torque Converters are designed to allow use with or without a midplate. The converter has the stock length nose piece. By removing the sleeve on the pilot, you can use this 1/4" extension.
- 1 - Pilot Extension
- 3 - 1/4" Washers
- 3 - Long converter bolts
$24.99More InfoAFCO 6690110 3/4 Inch Master Cylinder Rebuild Kit, Post January 2013x
AFCO 3/4" master cylinder rebuild kit for AFCO master cylinders manufactured after January 2013
Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.
Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.
$168.99More InfoBassett 55SR5C 15X15 Wide-5 5 Inch Backspace Chrome Wheelx
Rotating, unsprung weight is the most critical weight in a late model stock race car. Lighter wheels offer an immediate bolt-on performance advantage by lowering the moment of inertia, which boosts horsepower and improves handling. This is why Bassett created the lightest 15x15 wide-five wheel on the market!What's the secret to Bassett's Wide-Five wheel superiority? Using a unique wave pattern welding technique and special HSLA steel for a flatter, stronger ring center. Plus, patented Cornering Fatigue Testing Apparatus. It allows us to test new designs and know they'll work BEFORE the wheel hits the track. It's the reason why a Bassett Wide-Five wheel will last 3 times longer than any other wide-five wheel on the market - even those weighing five lbs. more!NOTE: For easier tire mounting, these wheels do not have a tire safety bead. For dirt applications, make sure you select a wheel with a safety bead at the time of order.
Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissionsx
These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.
- Factory style
- For GM T5 and T56 transmissions
$199.99More InfoWehrs 5 Inch Dual Bearing Spring Slider, 26 Inch Extended LengthxLots of new trickery on these new dual bearing spring sliders. Wehrs uses a linear ball shaft bearing instead of bronze bushing along with a shaft stabilizing internal piston for the smoothest and most stable slider on the market. The spring cup opposite the adjusting nut is quickly removed with a clip, so you don’t have to unscrew the nut to remove the spring. Also a four position locking mechanism for fine tuning. Wehrs put a Torrington bearing on the adjuster nut so you can adjust it easily and so the spring works freely throughout its travel. The length is on this slider is 26” extended.
- Linear ball shaft bearing
- Shaft stabilizing internal piston
- Innovative quick clip release and Torrington bearing adjusting nut for
- Effortless chassis adjustments
- Extended 26” length
$44.99$49.99More Info3X Chemistry Satin Rust Encapsulator, Quartx
3X:Chemistry Encapsulator is a single component, high solids paint specially formulated to bond to blasted or rusted metal surfaces. The coating forms a rock hard finish that's flexible, non-porous and will not crack, chip, flake or peel. No hardeners or activators are needed. Encapsulator is completely unaffected by salt, gasoline, oils, battery acids, hydraulic fluids, solvents, chemicals, or corrosives.
- Permanently stops rust and corrosion
- Can be sprayed or brushed over rusted surfaces
- Reusable after opening
- Highest percentage of solids
- Available in Satin
$18.99$19.99More InfoStainless Steel Beauty Ring for 15 Inch GM Rally Wheel, 2.5 Inch Widex
Modeled after 70's GM factory equipped rally wheel beauty rings. They are designed to fit our GM Style Rally Wheels.
- 15" x 2.5" stainless steel trim ring
- For use on 7" rim
- Perfect finishing touch to our GM Style Rally Wheels
$51.99$68.80More InfoDEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Packx
Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.
- Double-wall construction for added durability
- Helps prevent burn-through, hardening and cracking of boots
- Installs in seconds
- Universal-fits most straight or angled boots
- Withstands 1200°F direct continuous heat
- Non-flammable & protects against chemicals & resists water
$48.99$65.88More InfoDEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheetx
Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove.
Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.
- For firewalls, bulkheads, engine covers, floors, seat bottoms & more
- Capable of handling continual temperatures up to 850°F
- Resists UV degradation for long-term performance
- Virtually NO clearance needed
- Adhesive protected by a release liner rated up to 325°F
- Light weight and flexible-Trim to size
- Space age polymer material
- Reflects up to 850°F! Reflecting 80% of heat!
- Ultra light weight and self adhesive
$74.99$87.95More InfoLokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inchx
Lokar Hi-Tech Throttle Cable features a stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying.
Kits come complete with installation instructions.
$4.99More InfoWinters Sprint/Midget Rearend Nut for Quick Change Coverx
Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
- Aluminum rear cover nuts
- Red anodize
- Fit Winters rearends
- Sold individually
$4.99More InfoBassett 3BOLTKIT Beadlock Ring Bolt Kit, Set 18x
(18) Grade 8, 5/16"-18 bolts for Bassett beadlock wheels.
$8.99$11.45More InfoDEi 050371 Boom Mat Speaker Baffle, 6 X 8 Inch Oval Slimx
Please view the product's page for more information
$14.99$19.99More InfoOTR Racing RS48101-2 Short Oil Filter with Internal Magnet, Chevyx
OTR Filters very own oil filters are the finest spin on oil filters made in the motorsports world. Race engines are expensive, protect your investment.
OTR oil filters have:
- An internal magnet designed to attract fine steel particles too small to be trapped by the filter media!
- Non stick gaskets made from a proprietary synthetic rubber compound.
- Burst strength of 600 P.S.I.! OTR's spin on racing oil filters exceeds the ARP 1400 Standard by 5090, and they are made to handle the harshest conditions.
- Ability to trap particles down to 30 micron or less!
- Heaviest case and base plate in motorsports!
- Met TCM bypass specification of 12-14 P.S.I., which reduces the risk of premature bypass that can result in unfiltered oil flowing to your engine.
- 1" nut welded on the bottom of the filter with 4 safety wire tabs allowing for secure attachment every 90 degrees. Nut is welded on so securely that the canister will distort before weld breaks. Base must break/tear before the nut will come off..
$278.99More InfoHolley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/Cx
Please view the product's page for more information
$81.99$103.95More InfoLokar KD-2400U TH400 Electric Kickdown Kit, Blackx
Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Turbo 400 transmission kickdown kit includes "U-Cut-to-Fit" black outer housing. Designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal.
Complete installation instructions for TH400 included in kit.
$598.99More InfoImpact Necksgen Head & Neck Restraint Small/Youth, SFI 38.1, Adjustsx
The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind. Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones. Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.
- MADE IN THE USA!!!
- SFI 38.1 Compliant.
- Adjustable - Adjusts between 10 - 40 degrees for a Variety of Uses.
- Lightweight - Weights Less than Than 2 Pounds (1.8 pounds of 816.5 grams)
- Comfortable - Body Forming Shoulder Pads offer Superior Comfort.
- SAFE - Offers Superior Angular Impact Protection.
- Made from Carbon Fiber DuPont Composite Materials
Impact NecksGen now comes in 3 sizes. Large unit fits most adults, typically a driver 100 lbs or more. Medium unit is for smaller torso drivers 1" narrower but still accepts 2" or 3" seat belts. Youth unit, also fits small torso drivers, typically youth drivers between 7 and 16 years old. Youth size accommodates only a 2" seat belt.
From: $5.99More InfoNewStainless Steel Tooth Black Tie Wraps, 100 per Bagx
These zip ties are made in the U.S.A. and feature a stainless steel securing tooth. They come 100 to a package and are perfect for securing loose wiring and hoses or can help serve as temporary fixes to many odd jobs and projects.
- Stainless Tooth Tie Wraps feature super strong self-locking, stainless steel tooth, one piece design, standard size head.
- Black Tie Wraps are UV resistant. Recommended for outdoor usage.
- Metal Detectable
- Temperature Ratings 185 F / 85 C.
- UL Flame Rating 94V-2.
- Minimum installation temperature is greater than 32 F or 0 C.
- Made From Nylon 6/6.
- Choose from lengths of 4", 5.5", 7.3", and 11.4"
- 100 per Bag
$55.99More InfoBassett 57RT2 15X7 Dot D-Hole 4 on 4.5 2 Inch Backspace Black Wheelx
If you're an IMCA hobby stock or street stock racer, Bassett's collection of DOT-approved racing wheels are for you. They feature the same quality construction and high strength of our Cup/Busch/Truck certified wheel. Bassett DOT wheels are also the lightest on the market.Since the wheels conform to the DOT specifications, they are legal for the street! When outfitting your car or truck with custom wheels, don't settle for lower quality knock-offs. Bassett Racing Wheels are race track tough.PLEASE NOTE: Bassett Racing Wheels are lug-centric, which means the wheel is constructed and trued off of the bolt circle. The center hub bore hole can not be used to balance Bassett Racing Wheels. We recommend using an experienced tire mounter with a bolt pattern adapter plate that allows for balancing off of the bolt circle.Bassett Racing Wheels also require 45 degree chamfer lug nuts.
$9.99More InfoTaylor 20314 14 Inch Braided Grounding Strap Cablex
These braided grounding straps from Taylor Cable are 14" long 4-gauge and feature tin coated copper construction.
- 14" long
- 1" wide
- Tin coated copper
$17.99More InfoSweet Mfg. 001-21040 Rack and Pinion Replacement Bootx
These high quality rubber replacement boots for Sweet Mfg. rack and pinions perform as good as they look.
- Replacement for Sweet Mfg. rack and pinion
- High quality rubber construction
$3.99$5.99More InfoTitan Tools 32980 5LB Telescoping Magnetic Pick Up Toolx
These 5lb magnetic pick up tools will telescope from 6-1/2" to 33" and are ideal for retrieving dropped parts, fasteners, and tools. They feature a 3/4" diameter head with a comfortable textured cushion grip.
- 5lb telescoping magnetic pick up tool
- 5lb magnet with shielded sides for targeted pick-ups
- 3/4" Diameter head
- Telescopes from 6-1/2 to 33"Ideal for retrieving dropped parts, fasteners and tools.
- Comfortable textured cushion grip
$29.99More InfoSpeedway Lightweight Extended Jack Plate for 3/4 Inch Jack Boltx
These lightweight steel jack plates feature 5 inches of extended webbing to help keep springs in place and to prevent unwanted chassis changes on the track under race conditions. The special 3/4", -10 welded spud allows the plate to be locked to a weight jack bolt with a jam nut to help eliminate spring-to-jack bolt misalignment and spring binding during normal suspension travel. These plates are perfect for Sport Mods with an extreme left rear hike.
- 5" of extended webbing to help keep springs in place
- 3/4", -10 welded spud allows plate to be locked to weight jack bolt with a jam nut
- Lightweight laser cut steel design
- For use with 5" O.D. springs
- Perfect for Sport Mods with extreme left rear hike
- Jack Plate ONLY
- Jack bolt and jam nut sold separately
$129.99More InfoBassett 58A53IL 15X8 Inertia 5on5 3 Inch BS IMCA Black Beadlock Wheelx
Bassett's 15 x 8 spun-form beadlock wheel features the patented Inertia Advantage center. It's the only IMCA / Wissota-legal beadlock utilizing 100% spun-form shells and rings. Spun-form shells and rings are stronger, lighter and have less runout than roll-formed beadlock wheels.Another important feature of the Bassett beadlock is the stepped design of the two rings, which self-centers the tire and makes mounting a breeze. The Bassett beadlock also uses 18 high grade bolts, which clamps more consistently and prevents premature wear and air leaks. A Chrome Metal Color Finish Option is also available (Red or Blue).
$49.99$62.95More InfoLokar BAG-6085 73-98 Chevy Truck Billet Aluminum Throttle Pad w/Rubberx
These direct replacement throttle pads for 1973 - 1998 Chevy Truck feature rubber inserts and measure 2"x5". These billet aluminum pads are available in a brushed finish.
- Mounts onto factory arm and spring
- Quick and Easy Installation
- Available in brushed finish
$59.99More InfoSmall Block Chevy Steel Side Engine Mount Kitx
Use these universal small block Chevy engine mounts to fit your high-horsepower motor to the desired chassis of your choice. They are constructed of beefy .18" thick steel for safety and performance.
- Small Block Chevy applications
- Universal chassis applications
- Sturdy steel construction
- Hardware included
$24.99More InfoSpeedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inchx
These dry erase boards are great for making notes at the track or in the garage. Their convenient 17-1/2" x 19-1/2" size make them easy to transport.
- Stamped aluminum
- 17-1/2" tall x 19-1/2" wide
$94.99$95.99More InfoBassett 58DF2WC 15X8 D-Hole 5on4.5 2 In Backspace Wissota Chrome Wheelx
Bassett's 15 x 8 D-Hole style wheel for the IMCA, Wissota and asphalt markets featuring the same high quality spun-form shell as the Inertia Advantage wheel, but at a more economical price. Light weight, yet strong enough for 3500 lbs. stock cars Beaded shell to prevent tires from rolling off, very durable Spun-form shell provides the lowest runout on market (under .030") for better handling Valve stem behind center in window
$21.99More InfoShim-Dex Spark Plug Shims, 24 Pack, Close Clearancex
New close clearance shims, features a smaller outside dimension for minimal seat surface. Perfect for All Pro style heads due to the tight fit of the plug into the head.
These stackable spark plug shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees so that you get the most out of your spark plugs without causing overheat and pre-ignition due to thread exposure.
- Shim-Dex shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees
- You won't have to buy extra spark plugs to have them perfectly indexed
- Shim-Dex shims are reusable many times over
- Minimal or no thread exposure in the cylinder head that can overheat and cause pre-ignition
- Shim-Dex shims are so thin they will not adjust the gap too far out of the combustion chamber and negatively affect performance
- Pack includes 12 silver 60 degree shims and 12 black 90 degree shims
- Works well with any V8 engine application
$9.99More InfoMSD ASY11549 RPM Pill Module, 8200 RPMx
You can easily change the RPM limit on your MSD ignition box by switching RPM modules. These chips are for 8200 RPM limit applications.
- ASY11549 - Single MSD 8200 RPM Module
- Easily change the RPM limit on your MSD ignition box
$2.49$4.00More InfoReplacement Dash Light Bulb for 2-1/16 Inch Gaugesx
Swap your burned out, broken, or faulty gauge bulbs in 2-1/16" size gauges with these replacement light bulbs. They are a 3 watt bulb with in-line straight securing pins for use in most gauges and select speedometers and tachs.
- Replacement dash/gauge bulbs
- Fits 2-1/16" O.D. gauges
- 12 volt
- 3 watt bulb
- Sold each
$55.99$75.48More InfoCOMP Cams 4505-16 Hi-Tech Race Rocker Studs, 3/8 Inch Diameterx
COMP Cams® takes pride in having the finest rocker arm studs available on the market. The High Energy™ and Magnum series studs work well in applications with moderate lifts and spring pressures and are available in the popular 3/8” and 7/16” sizes. When ultimate strength is required as with high rpm roller cam applications, the Hi-Tech™ Race Stud is the answer. This stud has a thin jam nut for rocker clearance, rolled threads for maximum contact and a ground-flat top so accurate valve adjustment can be achieved and maintained. The diameter of the jam nut is larger in order to spread the load over a larger area. All COMP Cams® studs have generous radii and a black oxide finish.
- Set of 16
- 3/8" Stud Diameter
- Designed for ultimate strength and locking force
- High Energy™ and Magnum polylocks are best for moderate lift and spring pressure applications
- Hi-Tech™ Polylocks work well in all high end race applications
- The stud girdle polylocks are precision ground for minimum runout and tapered for extra strength in the locking area
$24.99More InfoTI64 222 Titanium Micro Sprint Bullet Nose Stop Adjuster Bolt Kitx
These bullet nose stop adjusters for Micro Sprint cars are constructed of titanium for long lasting durability. They come in a set of 4 bolts with 5/16"-18 x 1-3/4" threads.
- Bullet Nose Stop Adjuster
- Set of 4
- 5/16"-18 x 1-3/4"
$219.99More InfoSpeedway Single Layer SFI 1 Two-Piece Suit Safety Combox
Please view the product's page for more information
$63.99$79.99More InfoHeater Core for 1967-72 GM C/K Series Truck and Blazerx
For your 1967-72 GM C/K Series Truck, use a 100% new heater core, not a marginal recore like others sell. All heater cores are a direct fit factory replacement for applications without A/C.
- All new construction
- Direct fit factory replacement for 1967-72 GM C/K Series truck, Blazer, and Jimmy
- Please note: non air applications
Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock.
Mag Daddy 1 Inch Large Cable Daddy Magnetic Wire/Cable Fasteners, 5-Packx
Mag Daddy Cable-Daddy™ fasteners are designed to easily secure all wires and cables in a variety of environments. These magnetic fasteners adhere to most all metal surfaces with an absurd 23 lbs. of retention force! Mag Daddy Cable-Daddy™ fasteners are the best solution to wire and cable management. They're offered in a choice of three sizes to meet your requirements. Whether you need to hold a brake line in place or quickly organize wires or cables, Mad Daddy Cable-Daddy™ fasteners are the perfect fix.
- Black rectangular cable hold-down
- 23 lbs. of retention force
- Magnet base is 26mm x 11mm with a total height of 18.5mm
- Holds up to 20 unshielded Cat 5 Cables
- Easy Installation
- Plastic lasts 20x longer than Nylon 6.6
- Ability to Rotate 360°
- Take in and out wires
- Sold in packs of 5
Locations: Steel, Beams, Purlins, Ceiling Decks, Drop Ceiling Channels, Metal Joists, Frame Rail, Screw Heads, Metal Washer, etc.
$88.99More InfoNewHastings VA101 Isky Flathead Ford Valve Spring Shimsx
These Hastings valve spring shims are designed for use with our single valve springs (450185G). These shims will help you achieve the correct installed height for your valve springs when rebuilding Flathead Ford engines.
- 0.060" thick
- Designed for use with 185G springs
- Allows for correct valve spring height
- Set of 16 shims
$109.99$124.99More InfoQA1 5193 51 Series Steel Twin Tube 9 Inch Shock, Comp/Reb 3/3xThe best keep getting better! QA1 has taken your feedback, added new technology and developed an improved 50 Series shock absorber - the 51 Series. QA1’s 51 Series features a brand new in-house machined body, which has a large inside diameter for easy installation of gas bags. This twin tube shock absorber features hard anodized internals and has a zero gas pressure design providing the most grip on slick tracks and the best feel of any shock. Available in nine inch strokes, the 51 Series is the premium twin tube choice for dirt and asphalt modifieds, late models and super stocks. The 51 Series is manufactured in QA1’s Lakeville, MN facility and is completely racer rebuildable and revalveable.
- Racer Revalveable & Rebuildable
- Can Be Run Upside Down
- Length - 9"
Note: Be sure to check compressed and extended lengths carefully for proper fit. QA1 lengths do not necessarily correspond to competitors’ lengths.
QA1 also offers these shocks in packages specific to a variety of series. Contact QA1 for more information.
Additional Piston Option: QA1 also offers a brand new high-flow linear two port piston for the 51 Series as an additional accessory. This two port piston design allows
1 - 40 of 1000+ Results