Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"11 inch ford brake rotors" Page 1 of 2

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • 11 Inch Ford Disc Brake Rotors
    11 Inch Ford Disc Brake Rotors
    x
                

    This disc brake rotor was OEM on:

    • 1975-1980 Ford Granada
    • 1974-1977 Ford Maverick
    • 1977-1980 Lincoln Versailles
    • 1974-1977 Mercury Caliente, Comet
    • 1975-1980 Mercury Monarch

    NOT interchangable with rotor 91031067. If you have the brackets and adapters designed for the Granada rotor, the GM rotor 91031067 will not fit. Very common rotor to use as a conversion rotor.

  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Steering and Brake Kit for 46 Inch Ford Axle
    Steering and Brake Kit for 46 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • Steering and Brake Kit for 48 Inch Ford Axle
    Steering and Brake Kit for 48 Inch Ford Axle
    x
                

    This kit makes it easy to order a steering and brake kit in plain or chrome for your Ford axle. Included in kit are forged '37-'41 Ford spindles with fitted kingpins, 1-3/4" dropped bolt-on arms, 11" brake rotors with 5 on 4.5" or 5 on 4.75" bolt pattern, brackets, bearings and seals, mounting hardware, GM Metric calipers, spindle nuts, dust caps, brake lines with tabs, tie rod ends, and tie rod tube.

    • Ford Spindles
      • One piece forged 4140 steel
      • Modeled after the 1937-41 round-back design
      • Standard king pins fit to spindles
      • Spindle Identification Guide (Link)
    • Speedway 11" Brake Kit
      • 11" vented iron rotor, 1" thick 
      • Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP)
      • GM Metric '78-'88 calipers, 2-1/2" piston

    Choose 46" or 48" axle width kit. For spring over axles only.

  • AFCO 9850-6510 11 Inch Granada Style Brake Rotor, 1975-1981 5 x 5 Inch
    AFCO 9850-6510 11 Inch Granada Style Brake Rotor, 1975-1981 5 x 5 Inch
    x
                AFCO's premium 1975-1981 Ford 11" Granada style brake rotor has these great features:
    • Reduces rotating weight
    • Fits Pinto pin
    • Pre-drilled with 5 x 5" stock pattern
    • 11" diameter x .875" thickness
    • Races pre-installed
    • Stock-appearing
    • Meets OEM sanctioning requirements for modifieds, street stocks, and hobby stocks

    Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • 11 Inch GM Brake Rotor with Ford Bolt Pattern
    11 Inch GM Brake Rotor with Ford Bolt Pattern
    x
                

    1973-1977 GM rotor redrilled to the 5 x 4-1/2" Ford bolt pattern. To be used with our #7024475 GM metric caliper adapter kit for disc brakes on a 1937-1948 Ford car spindle. Very common rotor to use as a conversion rotor. Has 1/2" fine wheel studs.

    NOT interchangable with rotor 91031066. If you have brackets and adapters designed for the Granada rotor, use part #91031066.

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    x
                

    This basic front disc brake conversion kit easily installs big '73-'93 Ford F-150 2WD 11-3/4" rotors on your '37-'48 Ford car and '37-'47 Ford half-ton pickup truck spindles while retaining the original 5 on 5-1/2" wheel bolt circle. The calipers used with this kit are '71-'76 Chevy Impala single-pistion units.

    Kit includes:

    • Caliper brackets
    • Hardware
    • New bearing and seal adapters

    Note: This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.

    Early Ford Brake Kit Installation Instructions (PDF)

  • AFCO 9850-6511 11 Inch Granada Style Rotor, 1975-1981 5 x 4-1/2 Inch
    AFCO 9850-6511 11 Inch Granada Style Rotor, 1975-1981 5 x 4-1/2 Inch
    x
                AFCO's premium 1975-1981 Ford 11" Granada style disc brake rotor has these great features:
    • Reduces rotating weight
    • Fits Pinto pin
    • Pre-drilled with 4-1/2" stock pattern
    • 11" diameter x .875" thickness
    • Races pre-installed
    • Stock-appearing
    • Meets OEM sanctioning requirements for modifieds, street stocks, and hobby stocks

    Instructions (PDF)

  • Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    Basic Brake Kit 1978-88 GM Caliper to Early Ford Spindles
    x
                Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car spindles. No machine work needed. Please see below for suggested 1973-77 GM type 11" brake rotor part #'s required.

    Kit Includes:
    • GM to Ford brake brackets
    • 1978-Up hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.

    702-4475 Instructions (PDF)

  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • 11 Inch Mopar-Ford Brake Rotor
    11 Inch Mopar-Ford Brake Rotor
    x
                

    This rotor was OE on these models:

    • Chrysler
      • Cordoba 80-83
      • 5th Avenue 83-89
      • LeBaron 77-81
    • Dodge
      • Aspen 76-80
      • Challenger 73-74
      • Charger/Demon/Dart 73-76
    • Plymouth
      • Volare 76-80
      • Barracuda 73-74
      • Duster 73-76
      • Satellite 73-74
      • Gran Fury 82-89
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Ford F-150 11.75 Inch Brake Rotor
    Ford F-150 11.75 Inch Brake Rotor
    x
                5 x 5-1/2". This rotor was originally used on front of most Ford F-150 two wheel drive trucks from 1973 to approximately 1993. 11.75" diameter. 
            
  • Replacement 11-1/4 Inch Rear Brake Rotor
    Replacement 11-1/4 Inch Rear Brake Rotor
    x
                

    These 11-1/4" one-piece, vented iron disc brake rotors are for rear disc brake applications. Features dual bolt patterns for 5 x 4.5" (Ford/Mopar) and 5 x 4.75" (Chevy/GM) wheels. 

    • Center Hole:  2.78"
    • Backspace:  2.30"
    • Maximum Axle Flange Diameter:  6-1/4"
    • Thickness:  1"
    • Thickness @ Center of Rotor:  0.236"
  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Speedway Dirtworks 10.5 Inch Granada Style Disc Brake Rotor
    Speedway Dirtworks 10.5 Inch Granada Style Disc Brake Rotor
    x
                

    Our 1975-1981 Ford 10.5" Granada style rotor is specifically designed for the rigors of dirt track racing. Drilled with a Wide 5 pattern with a 5-on-5" bolt circle. Includes 5/8" coarse quick-start wheel studs (installed).

    NOT for use in asphalt racing.

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    This basic front disc brake conversion kit allows you to bolt on modern disc brakes to your '37-'48 Ford passenger car style spindles. Kit comes with the caliper bracket, inner bearing and seal, and required hardware. Outer bearing 912-TLM11949 is not supplied with this kit.

    Not for use with bolt-on steering arms.

    Kit works with '76-'80 Dodge Aspen 11" rotors (5 on 4-1/2" wheel bolt pattern) and '69-'77 GM mid-size calipers.

    916-31921 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Bearing & Seal Kit - 11 Inch Brakes to Mustang II Spindle
    Bearing & Seal Kit - 11 Inch Brakes to Mustang II Spindle
    x
                Bearing & seal kit for GM 11" rotor/Mustang II spindle brake kit (910-31944)

    Kit Includes:

    • Seals
    • Tapered inner bearing cones
    • Tapered inner bearing cups
    • Tapered outer bearing cones
    • Tapered outer bearing cups
  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • AFCO 7250-0100 Ford 9 Inch Axle Brake Kit
    $384.99
    $408.99
    AFCO 7250-0100 Ford 9 Inch Axle Brake Kit
    x
                

    These rear disc brake kits allow you to simply bolt disc brakes on your 9" Ford rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware. Has 5 x 4-1/2" bolt pattern.

    Minor fitting to axle housing may be required. 

    Kit includes:

    • 11-1/2" one-piece vented iron rotors
    • Caliper brackets
    • Metric calipers, 2-1/2" pistons
      • 10mm - 1.5 inlet
    • Brake pad spacers
    • AFCO C1 pads
      • Medium-High temp rating
      • Extremely rotor friendly, exceptional pad life
    • Slide bolts
    • All hardware included

     

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 58-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3550 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 56-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3548 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 54-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3546 Instructions (PDF)

  • Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    Gasser Straight Axle, Ford Spindle and Brake Kits, 52-1/4 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3544 Instructions (PDF)

  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 5-1/2 Inch
    x
                

    This kit installs '73-'93 Ford F-150 11-3/4" rotors and '71-'76 Chevy Impala calipers on 1948-1956 Ford F-100 spindles.

    Instructions (PDF) 

  • Dorman Products 13975 Wheel Hub Dust Cap for 91031065 Mopar/Ford Rotor
    Dorman Products 13975 Wheel Hub Dust Cap for 91031065 Mopar/Ford Rotor
    x
                

    These wheel hub dust caps are sure to help protect your wheel bearings from dirt, dust, and moisture.  They feature a zinc plated steel finish and are designed to our 910-31065 Rotor and 1973-1989 Mopar front hubs.

    Application:

    • Chrysler
      • Cordoba 80-83
      • 5th Avenue 83-89
      • LeBaron 77-81
    • Dodge
      • Aspen 76-80
      • Challenger 73-74
      • Charger/Demon/Dart 73-76
    • Plymouth
      • Volare 76-80
      • Barracuda 73-74
      • Duster 73-76
      • Satellite 73-74
      • Gran Fury 82-89

     

  • Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    Basic Disc Brake Kit, 1948-56 Ford Half-Ton, 5 on 4-3/4 Inch
    x
                

    This kit installs '73-'77 GM mid-size car 11" rotors and '70-'77 Camaro or GM equivalent calipers on 1948-1956 Ford F-100 spindles.

  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31936 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

    NSRA Legal

    910-31933 Instructions (PDF)

Goto Previous PagePrevious Page
1 2