Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"10 inch bracket" Page 1 of 3

  • AFCO 6855 Reactor Gas Bracket Attack Coil-Over Shock, 5 Inch Stroke
    AFCO 6855 Reactor Gas Bracket Attack Coil-Over Shock, 5 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube Bracket Attack coil-over shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. 

    The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • 100% co-Tested and Serial Numbered

    Includes coil-over kit. Coil spring NOT included.

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Lokar ATS6350DM GM TH350 10 Inch Hi-Tech Transmission Shifter Assembly
    Lokar ATS6350DM GM TH350 10 Inch Hi-Tech Transmission Shifter Assembly
    x
                When you get a Lokar shifter, you know you're  buying quality. Lokar shifters are built to deliver outstanding  performance and safety with their patented Safety Lock-Out button. The  button prevents accidental shifting from park into reverse, drive, and  low gears.

    Other important features include:
    • 10" single bend lever
    • For GM TH350
    • Trans mount
    • Neutral safety switch
    • 360 degree lever rotation for extra leg room
    • Completely adjustable mounting bracket that allows for a wide range of installation positions
    • Brushed aluminum mushroom shift knob
  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit w/ E-Brake
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM emergency brake calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires the use of 16" wheels as this kit has a minimum 14-5/8" I.D. for caliper clearance 

    910-31928 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit
    x
                

    If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.

    • 5 on 4-3/4" bolt circle
    • Fits over an axle with a maximum flange diameter of 6" O.D.
    • 2.872" rotor center hole
    • Requires a minimum 14-5/8" I.D. for caliper clearance 

    910-31923 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Tank Mounting Brackets for 10 Inch Diameter Tanks
    Tank Mounting Brackets for 10 Inch Diameter Tanks
    x
                

    Steel tank mounting brackets for mounting 10" diameter tanks.

  • EMPI 17-2929 Replacement 10 Inch Round Fuel Tank Bracket Straps, Polished Stainless Steel
    EMPI 17-2929 Replacement 10 Inch Round Fuel Tank Bracket Straps, Polished Stainless Steel
    x
                

    These gas tank brackets from EMPI are replacement for 10" diameter fuel tanks.  All straps feature quality stainless steel construction and come complete with stainless steel hardware.

    • 10" Diameter
    • Polished stainless steel
    • Hardware included
    • Sold individually
  • Model T Fiberglass Rear Fender, 10 Inch
    Model T Fiberglass Rear Fender, 10 Inch
    x
                

    These 10" wide fiberglass fenders are modeled after the '22 Ford Model T fender and come with a smooth gelcoat finish. Attaches to spindle/backing plate brackets that you provide.

    Ships UPS Oversize.

  • AFCO 6845 Reactor Gas Bracket Attack Coil-Over Shock, 4 Inch Stroke
    AFCO 6845 Reactor Gas Bracket Attack Coil-Over Shock, 4 Inch Stroke
    x
                

    AFCO Single Adjustable Monotube Bracket Attack coil-over shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. 

    The rebound adjustment is the most critical in tuning a drag racing set-up. This adjustment allows the tuner to dial in the "un-loading action" of the chassis and keep the tires planted during the critical first 60' down the track.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • 100% co-Tested and Serial Numbered

    Includes coil-over kit. Coil spring NOT included.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the right front wheel.

  • AFCO 40121PL Granada 10-1/2 Inch Brake Caliper Bracket, LH
    AFCO 40121PL Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount GM "Metric" calipers to Pinto/Mustang II spindles for use with what is basically a 1975-1981 "Granada" 10-1/2" brake rotor.

    Available in LH or RH. Sides are reversed on 1973 & older spindles.

  • AFCO 40121PR Granada 10-1/2 Inch Brake Caliper Bracket, RH
    AFCO 40121PR Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount GM "metric" calipers to Pinto/Mustang II spindles for use with what is basically a 1975-1981 "Granada" 10-1/2" brake rotor.

    Available in LH or RH. Sides are reversed on 1973 & older spindles.

  • M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    M&W Aluminum Left Front Brake Caliper Mount for 10.2 Inch Rotor, Black
    x
                These disc brake caliper brackets for left front calipers are made from high quality aluminum.  They feature an anodized black finish and include all necessary hardware. They are intended for 10.2" (10-1/8") diameter rotors.
    • Sprint car
    • Black Left front brake caliper mount
    • 3.25" long
    • For 10.2" (10-1/8") rotor
  • Black Poly Fuel Tank, 13.5 Gallon, 10 x 40 Inch
    Black Poly Fuel Tank, 13.5 Gallon, 10 x 40 Inch
    x
                These black poly gas tanks include chrome mounting brackets, a screw-on cap and a 1/4" NPT threaded outlet molded into the bottom center. Care should be taken to not over-tighten fitting.
            
  • Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end.  Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Wilwood aluminum hats fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31935 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    Longacre 22568 Rear End Axle Breather Vent Kit, 1-3/4 Inch Tube Clamp
    x
                

    These Longacre billet rear-end breathers provide a convenient way to vent rear differentials, transmissions, and other components. They're easy to use--just clamp them on to a roll bar and no welding is required.

    • Tube clamp on design, no welding required
    • Includes vent, hardware, and hose for a quick professional installation
    • Differential Vent Thread Size (in):  0.125
    • Differential Vent Head Style:  Round
    • Differential Vent Material:  Steel/Rubber
    • Differential Vent Finish:  Chrome
    • This bracket mounts to 1-3/4 in. round bar.
  • Derale 53478 Stacked Plate Cooler 34 Row 13 x 10-7/8 Inch 2 Inch Thick
    Derale 53478 Stacked Plate Cooler 34 Row 13 x 10-7/8 Inch 2 Inch Thick
    x
                Designed for engine and transmission cooling. These are the most efficient heat exchangers available. Furnace brazed aluminum construction with four integrated mounting brackets. Female - 10 AN O-ring inlets. 34 row cooler designs.
            
  • Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

    This tank features a fuel outlet that is 3" from the end opposite the filler neck.

  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Ultra Lite 410-8110 .810 Inch Titanium Rotor Inboard Kit, 4 Bolt Mount
    Ultra Lite 410-8110 .810 Inch Titanium Rotor Inboard Kit, 4 Bolt Mount
    x
                

    Save weight and increase braking with this lightweight rear brake kit.  The .810"x 10.4" rotor is ceramic coated for durability and performance and is mated to a billet caliper.  The NEW improved FeatherLite Sprint Inboard caliper uses three retaining pins to secure the brake pads.  Also NEW is the heavy duty 4 bolt Inboard Caliper Bracket available for both standard and small bells.  The FeatherLite Caliper combined with our Ceramic Coated Titanium Rotor offers the best braking ability for your Sprint Car!

    Ultra Lite .810 Inch Drilled and Slotted Titanium Rotor Inboard Kit HD - 4 Bolt Mount

    Lightest rotating mass of any .810 sprint car brake. Weighs only 2 lb, 11 oz for titanium. 4 piston caliper and brackets.

    Includes:

    • (1) rotor
    • (2) pads
    • (1) caliper
    • bracket
    • clamp
    • hardware

     

  • Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
    Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

  • Spun Aluminum Fuel Tank, 9-1/2 Gallon, 10 x 28-1/2 Inch
    Spun Aluminum Fuel Tank, 9-1/2 Gallon, 10 x 28-1/2 Inch
    x
                

    These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

  • Lokar EFB-9000 Under Dash Emergency Brake Foot Pedal, Brushed Aluminum
    Lokar EFB-9000 Under Dash Emergency Brake Foot Pedal, Brushed Aluminum
    x
                

    Lokar's under-dash emergency brake pedal offers easy operation in a clean, out of the way assembly. Mounted bracket can be adjusted to fit firewall-to-dash distances of 9 to 13 inches.  Pedal arm measures 10 inches and is available with a brushed aluminum or chrome plated finish.

    Under-dash brake pedal works with Connector Cable kit 491-8001HT (which is available in stainless or black) and Universal Cables 491-80FU.

    Under-Dash E-Brake Installation Instructions (PDF)

  • Black Poly Fuel Tank, 10 Gallon, 10 x 30 Inch
    Black Poly Fuel Tank, 10 Gallon, 10 x 30 Inch
    x
                These black poly gas tanks include chrome mounting brackets, a screw-on cap and a 1/4" NPT threaded outlet molded into the bottom center. Care should be taken to not over-tighten fitting.
            
  • Garage Sale - AFCO Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    Garage Sale
    Garage Sale - AFCO Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

     

     This brake bracket is garage sale priced because it has been bolted on.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Goto Previous PagePrevious Page
1 2 3