Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1 inch steel u joint" Page 1 of 4

  • Unisteer 8050310 Steering U-Joint-1 Inch Double D to 3/4 Inch Double D
    Unisteer 8050310 Steering U-Joint-1 Inch Double D to 3/4 Inch Double D
    x
                

    These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.

    This is a size that is used on some large GM steering columns. This specific steering universal joint uses a pinch bolt fastener on the 3/4"DD side and a set screw on the 1"DD side, due to the large size

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

    Fits IDIDIT/Flaming River 1" Double D

  • Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    x
                Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This universal joint is 3.875 inches long and 1.375 inches in diameter.
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • 1.354" not including the screws (1.534" including), width on the u-joint.
    • 1.125" OD on the ends not including the nut (1.345" including the nut). 

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4 Inch Round to 3/4 Inch Round, Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch Round to 3/4 Inch Round, Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering u-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • Sweet Mfg Steering U-Joint, 3/4 Inch 36-Spline to 3/4 DD, GM Manual/Mustang II
    Sweet Mfg Steering U-Joint, 3/4 Inch 36-Spline to 3/4 DD, GM Manual/Mustang II
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

    These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    Sprint Car U-Joint Steel Bolt Kit, 7/16-20 x 1 Inch
    x
                

    U-joint bolt kit for sprint car driveshaft U-joints. These steel socket cap screws have hex drive heads and 7/16"-20 fine threads with a 1.00" length. Black oxide coated.

    Includes 4 bolts per bag.

  • Unisteer 8050420 Steering U-Joint, 3/4 Inch Smooth to 3/4 Inch Smooth
    Unisteer 8050420 Steering U-Joint, 3/4 Inch Smooth to 3/4 Inch Smooth
    x
                

    These polished stainless steel U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted. These steering universal joints are 3-3/4 inch in total length and have a 1.650 inch diameter.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
  • Unisteer 8050230 Steering U-Joint, 9/16 Inch-26 Spline to 3/4 Inch DD
    Unisteer 8050230 Steering U-Joint, 9/16 Inch-26 Spline to 3/4 Inch DD
    x
                

    These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation. These universal joints are 3-3/4 inch in length and have a 1.650 inch outside diameter.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length

    This size of spline works with Unisteer's Cross Steer Rack & Pinion, Prostock Rack, and Manual Camaro Rack & Pinion and is also the size of manual Mustang Style Rack & Pinions.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Unisteer 8050330 Steering U-Joint-3/4 Inch Double D to 3/4 Inch Smooth
    Unisteer 8050330 Steering U-Joint-3/4 Inch Double D to 3/4 Inch Smooth
    x
                

    These polished stainless steel U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted. These steering universal joints are 3-3/4 inches in length and have an outside diameter of 1.650 inches.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    Unisteer 8050850 Steering U-Joint, 3/4 Inch 36-Spline to 3/4 In Smooth
    x
                

    These polished stainless steel steering U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted These steering universal joints are 3-3/4 inch in length and are 1.650 inch in outside diameter. 

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
  • Sweet Mfg Steering U-Joint, 9/16 26 Spline to 1 Inch DD, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16 26 Spline to 1 Inch DD, Mustang II Manual
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are constructed out of forged Vanadium steel. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050430 Steering U-Joint-9/16 In-26 Spline to 3/4 Inch Smooth
    Unisteer 8050430 Steering U-Joint-9/16 In-26 Spline to 3/4 Inch Smooth
    x
                

    These polished stainless steel U-joints look & function beautifully and use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted.

    The outside diameter of this steering universal joint is approximately 1.25" and the length is approximately 3.75" 

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
  • Sweet Mfg Steering U-Joint, 5/8-36 Spline, 1 Inch DD, Vega/Corvair/GM Rack
    Sweet Mfg Steering U-Joint, 5/8-36 Spline, 1 Inch DD, Vega/Corvair/GM Rack
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 5/8"-36 spline and feature forged Vanadium steel yokes.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 5/8"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1 Inch DD, Big GM Pre 1978
    Sweet Mfg Steering U-Joint, 13/16-36 Spline to 1 Inch DD, Big GM Pre 1978
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 13-16"-36 spline and feature forged Vanadium steel yokes.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 13/16"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050290 Steering U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    Unisteer 8050290 Steering U-Joint, 5/8 Inch-36 Spline to 3/4 Inch DD
    x
                

    These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length

    This universal joints size is 5/8"-36 count spline by 3/4" DD Shaft. It is the common size for the Vega style steering box.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Billet U-Bolt Strap Kit, 1-1/8 Inch
    Billet U-Bolt Strap Kit, 1-1/8 Inch
    x
                

    NEVER OVERTIGHTEN U-BOLTS AGAIN !! 

    These universal billet strap kits fit 1330 U-Joint, Steel Girdle, Ford 9 inch.  They include case hardened bolts, nuts, flat and lock washers.

    • Billet strap kit
    • Fit 1330 U-Joint, Steel Girdle, Ford 9 inch
    • Include case hardened bolts, nuts, flat and lock washers
  • Sweet Mfg Steering U-Joint, 3/4 Inch DD to 1 Inch DD, GM Column / Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch DD to 1 Inch DD, GM Column / Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 3.875 inches long and 1.375 inches in diameter. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4 Inch Round to 1 Inch DD, GM Column/Universal
    Sweet Mfg Steering U-Joint, 3/4 Inch Round to 1 Inch DD, GM Column/Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4 round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 1 Inch DD, GM Column
    Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 1 Inch DD, GM Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 1"-48 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 1 Inch-48 Spline to 1 Inch DD, GM Column
    Sweet Mfg Chrome Steering U-Joint, 1 Inch-48 Spline to 1 Inch DD, GM Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1" DD
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 1 Inch DD to 1 Inch DD, IDIDIT/Flaming River Column
    Sweet Mfg Steering U-Joint, 1 Inch DD to 1 Inch DD, IDIDIT/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are of the highest quality for racing and street use.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch Round, GM Column
    Sweet Mfg. Steering U-Joint, 1 Inch 48-Spline to 3/4 Inch Round, GM Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 1 Inch DD, Universal
    Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 1 Inch DD, Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering  universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • 1.354" not including the screws (1.534" including), width on the u-joint.
    • 1.125" OD on the ends not including the nut (1.345" including the nut). 
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    Unisteer 8050300 Steering U-Joint, 3/4 Inch Double D to 3/4 Inch DD
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

  • Sweet Mfg Chrome Double U-Joint, 1 Inch-48 Spline to 3/4 Inch DD
    Sweet Mfg Chrome Double U-Joint, 1 Inch-48 Spline to 3/4 Inch DD
    x
                

    Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.

    • These are 5-3/4" Long

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 9/16 Inch 26-Spline to 3/4 Round, Mustang II Manual
    Sweet Mfg Steering U-Joint, 9/16 Inch 26-Spline to 3/4 Round, Mustang II Manual
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg. U-Joint, 3/4 Inch-20 Spline to 3/4 Inch Round, Weld-On
    Sweet Mfg. U-Joint, 3/4 Inch-20 Spline to 3/4 Inch Round, Weld-On
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends. U-joints available for round or double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    Sweet Mfg. 401-51221 U-Joint, 3/4 Inch-36 Spline to 3/4 Inch-20 Spline
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering universal joints have 3/4 weld-on ends.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • U-Joint=3.875" L x 1.375" D
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

     

  • Sweet Mfg Steering U-Joint, 3/4-30 Spline to 1 Inch DD, Small GM P/S 1978-Up
    Sweet Mfg Steering U-Joint, 3/4-30 Spline to 1 Inch DD, Small GM P/S 1978-Up
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 3/4"-30 spline and of the highest quality for racing and street use. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 1 Inch DD, Ididit/Flaming River Column
    Sweet Mfg Chrome Steering U-Joint, 1 Inch DD, Ididit/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 1 Inch-48 Spline to 3/4 DD, GM Column
    Sweet Mfg Chrome Steering U-Joint, 1 Inch-48 Spline to 3/4 DD, GM Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 1" DD
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 1 Inch DD, 3/4 Round, IDIDIT/Flaming River Column
    Sweet Mfg Steering U-Joint, 1 Inch DD, 3/4 Round, IDIDIT/Flaming River Column
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4 36-Spline to 1 Inch DD, GM Manual/Mustang II
    Sweet Mfg Steering U-Joint, 3/4 36-Spline to 1 Inch DD, GM Manual/Mustang II
    x
                

    Don't jeopardize your safety with inferior quality Mustang II power rack U joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing. These steering universal joints have full compliment bearings and 3/4"-36 spline.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    •  3/4"-36 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    Sweet Mfg Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood/SJ/MGB
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These 3/4"-48 spline steering universal joints work with Wilwood, Sweet Jaguar, and MGB.

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Chrome Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood, MGB
    Sweet Mfg Chrome Steering U-Joint, 3/4-48 Spline to 1 Inch DD, Wilwood, MGB
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    • Wilwood, Sweet, Jaguar, MGB
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • GM Front Slip Yoke, 5 1/2 Inch
    GM Front Slip Yoke, 5 1/2 Inch
    x
                

    Stock length (5-1/2") slip yoke for GM applications with 1-3/16" x 27-spline output shaft. Works with 1310 series U-joints.

    • This yoke measures 5-1/2" from tip to centerline of u-joint
    • This yoke is grooved for an "external" u-joint cap retaining clip
    • The machined length on the yoke is 3-3/4"

    The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall. 

    Fits over the output shaft of the following transmissions: 

    • Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft
    • Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions
    • Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions
  • Sweet Mfg Steering U-Joint, 3/4-30 Spline to 3/4 Inch DD, Small GM P/S 1978-Up
    Sweet Mfg Steering U-Joint, 3/4-30 Spline to 3/4 Inch DD, Small GM P/S 1978-Up
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are needle bearing and have 3/4"-30 spline. 

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-30 Spline

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 Inch DD, Wilwood/SJ/MGB
    Sweet Mfg Steering U-Joint, 3/4-48 Spline to 3/4 Inch DD, Wilwood/SJ/MGB
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints work with Wilwood, Sweet Jaguar, and MGB with their 3/4"-48 spline. 

    • Works with: Wilwood, Sweet Jaguar, MGB
    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing or street
    • Features needle bearing u-joints
    • 3/4"-48 Spline
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • Unisteer 8050880 Steering U-Joint, 3/4 Inch-36 Spline to 3/4 Inch DD
    Unisteer 8050880 Steering U-Joint, 3/4 Inch-36 Spline to 3/4 Inch DD
    x
                

    These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

    This particular steering universal joints Size is 3/4"-36 count spline by 3/4"DD. This is the size that is used on Ford Power rack & pinions such as the Mustangs. This U-joint uses pinch bolt fasteners on either side.

    • The OD is 1.650" (41.90mm) 
    • 3-3/4" in total length
    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

    NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

Goto Previous PagePrevious Page
1 2 3 4