Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1 barrel carburetor" Page 1 of 8

  • 6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • 3-3/4" tall from the base to the highest point on the top.
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

     

  • Two Plain 9 Super 7   Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    Two Plain 9 Super 7 Carbs, Edelbrock 1103 Slingshot Intake, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    Edelbrock 4025 Uni-Syn Carburetor Synchronizing Tool
    x
                

    If you have more than one carb on your hot rod, you need one of these "Uni-Syn" carb synchronizing tools. Just set on the top of your carb and adjust until all the carbs in your tri-power three deuce set-up read the same. 

    Works well on small one barrel and two barrel carbs (downdraft or side-draft). Fits carb necks from 1-3/8" up to 3".

  • Universal Carb Adapter, Tapered Port
    Universal Carb Adapter, Tapered Port
    x
                Adapts all  '50s style 1-7/16" WCFB or 4 Jet carbs with smaller base pattern to all large and medium base 1-11/16" port  or open 4 barrel carb manifolds. This tapered port carburetor adapter comes with gaskets for the top and bottom as well as all mount hardware. 
    • 7/16" thick spacer
    • 4 Barrel Carburetors
    • Tapered 4-hole port
  • Edelbrock 1151 94 2-Barrel Carburetor
    Edelbrock 1151 94 2-Barrel Carburetor
    x
                Please view the product's page for more information
            
  • Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 3" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also comes with mounting hardware and PVC smog fitting adapter.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Holley 2300 to Rochester 2G Two Barrel Intake Carburetor Adapter
    Holley 2300 to Rochester 2G Two Barrel Intake Carburetor Adapter
    x
                

    This aluminum carb adapter plate lets you adapt a large Holley 2300 series 2-barrel carburetor to a Rochester 2G 4-bolt 2-barrel intake manifold base. The adapter features an open plenum design and measures 1/2" thick. The carburetor adapter includes two gaskets and all necessary hardware to install.

    • Adapts Holley 2300 (or equivalent Ford/Motorcraft) to Rochester 2G/Carter intake
    • Smaller bolt pattern: 1-7/8" x 3-1/4"
    • Larger bolt pattern: 3-1/2" x 5-1/8"
    • Adapter is 1/2" thick

    Note: With just a little work with a file, the adapter can also be used to adapt an intake manifold with a 2" x 3-3/4" bolt pattern to the Holley 2300/Ford/Motorcraft 2 barrel carburetor as well.

  • Holley 0-80457S 4160 600 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80457S 4160 600 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Holley's Model 4160 4-barrel carburetors are designed for budget minded enthusiasts and are calibrated for use on stock to mildly modified engines. These classic Holley four barrel carbs feature all metal parts and vacuum secondaries. They have a universal throttle lever and power valve blow-out protection.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Electric choke
    • Single feed fuel inlet
    • Side hung float bowls
    • Power Valve Blow-Out Protection
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance
    • “Next Gen” needle & seat design eliminates the need for external float level adjustment

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Set of 3 Speedys 9 Super 7    3-Bolt 2 Barrel Carburetors, Plain Finish
    Set of 3 Speedys 9 Super 7 3-Bolt 2 Barrel Carburetors, Plain Finish
    x
                Please view the product's page for more information
            
  • Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
    Holley 0-4412CT Circle Track 500 CFM 2 Barrel Carburetor
    x
                This 500cfm 4412CT Holly carb shares the hugely  successful features of the original 4412C but with a couple changes  aimed for circle track cars. The choke has been removed but the horn  remains and has been specially calibrated for circle track use. The  4412C Holley carb is easily the most winningest two barrel carburetor on the market  and comes out of the box ready to run. 

    Features:
    • Choke delete
    • Choke horn remains
    • 50cc accelerator pump
    • 1 timed (spark) port, 1 full vacuum, & 1 PCV port
    • The mandated carbs for many oval track racing sanctioning bodies
    • Calibrated specifically for circle track use
  • Willys Carbs WCD44120 500 CFM 2-Barrel Racing Carburetor
    Willys Carbs WCD44120 500 CFM 2-Barrel Racing Carburetor
    x
                Willy's two barrel carbs make much more power than stock, but retain the stock appearance and will pass tech. 

    This 500 CFM 2 barrel carburetor has a 1-3/8" venturi and 1-11/16" throttle plate. It uses the standard Holley metering block. These 2 barrel carbs will pass tech gauges and produces great torque and horsepower. They are popular on NASCAR late models and are IMCA & WISSOTA Legal. This two barrel carburetor has "LIST 4412-2" stamped on it, and looks stock.

    IMCA approved.
  • Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 4" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • stud and nut included
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 4776C 4150 Double Pumper 600 CFM 4 Barrel Carb, Manual Choke
    Holley 4776C 4150 Double Pumper 600 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetor's dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lightweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Four corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 600 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-4777C 4150 Double Pumper 650 CFM 4 Barrel Carb, Manual Choke
    Holley 0-4777C 4150 Double Pumper 650 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetors dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lighweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Two corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80528-1 HP Series 750 CFM Gas 4 Barrel Carburetor
    Holley 0-80528-1 HP Series 750 CFM Gas 4 Barrel Carburetor
    x
                

    Holley's HP Series four barrel carburetors set the standard in oval track race carbs. These performance calibrated gasoline four barrel carbs are race ready, right out of the box. The Model 4150 HP 4 barrel carb is packed with premium features like contoured air entries, high strength castings, and stainless throttle plates, all of which will provide you with a definite advantage at the track.

    • Calibrated for gasoline
    • Dichromate finish
    • Contoured Venturi entry angles and symmetrical venturi bores
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Spun-in down leg style boosters
    • High strength sealing surfaces
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.376"
    • Throttle bore: 1.687"

    Holley 750 4 Barrel Carb Installation Instructions (PDF)

  • Chrome 9 Super 7   Carbs on a Single 4 Barrel Intake Manifold Adapter Kit
    Chrome 9 Super 7 Carbs on a Single 4 Barrel Intake Manifold Adapter Kit
    x
                Please view the product's page for more information
            
  • Two Plain 9 Super 7   Carbs on Single 4 Barrel Intake Manifold Adapter Kit
    Two Plain 9 Super 7 Carbs on Single 4 Barrel Intake Manifold Adapter Kit
    x
                Please view the product's page for more information
            
  • Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
    x
                Please view the product's page for more information
            
  • Holley 0-4779C 4150 Double Pumper 750 CFM 4 Barrel Carb, Manual Choke
    Holley 0-4779C 4150 Double Pumper 750 CFM 4 Barrel Carb, Manual Choke
    x
                

    Top off your your engine with an American icon - the Holley Model 4150 Double Pumper. As a staple on hot street cars and race vehicles, this four barrel carburetors dual accelerator pumps provide additional fuel under initial acceleration for awesome tire-turning performance in lighweight vehicles and vehicles with manual transmissions or low gearing. Plus, with mechanical secondaries, your foot directly controls the opening of the secondary throttle blades.

    With features like dual metering blocks, center hung floats, 4-corner idle, and dual fuel inlets, it's no wonder why Holley is #1 in performance fuel delivery.

    • Mechanical secondaries
    • Dual accelerator pumps
    • Manual choke
    • Four corner idle
    • Dual feed fuel inlet
    • Center hung floats
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing

    Holley 750 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80535-1 HP Series 750 CFM Alcohol 4 Barrel Carburetor
    Holley 0-80535-1 HP Series 750 CFM Alcohol 4 Barrel Carburetor
    x
                

    Holley's HP Series methanol four barrel carburetors set the standard in oval track race carbs. These performance calibrated alcohol four barrel carbs are race ready, right out of the box. The Model 4150 HP 4 barrel carb is packed with premium features like contoured air entries, high strength castings, and stainless throttle plates, all of which will provide you with a definite advantage at the track.

    • Calibrated for Methanol
    • Dichromate finish
    • Contoured Venturi inlet
    • Booster venturi is a down-leg, double step design providing a considerably stronger vacuum signal
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Spun-in down leg style boosters
    • High strength sealing surfaces
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.376"
    • Throttle bore: 1.688"

    Holley 4 Barrel Carburetor Installation Instructions (PDF)

  • Set of 3 Speedys 9 Super 7    Chrome 3-Bolt 2 Barrel Carburetors
    Set of 3 Speedys 9 Super 7 Chrome 3-Bolt 2 Barrel Carburetors
    x
                Please view the product's page for more information
            
  • Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor, Manual Choke
    Holley 0-1850SA 4160 Aluminum 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Holley's new Model 4160 600 CFM aluminum street four barrel carburetor is constructed from aluminum, which compared to its zinc counterpart equates to a weight savings of over 5 lbs. This Holly carburetors new aluminum will hold its shine and can also be hand polished for a custom look.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Manual choke
    • Single feed fuel inlet
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Willys Carbs WCD80541-1 GM 602 Crate Motor 4 Barrel Gasoline Carb
    Willys Carbs WCD80541-1 GM 602 Crate Motor 4 Barrel Gasoline Carb
    x
                

    If you are running the GM 602 crate motor, you need one of these Willy's four barrel carburetors. They are specifically built and dyno tuned to give you maximum power from your crate engine. 

    • Standard metering blocks
    • Based on a 650 body, flows between 800-850 CFM
    • Straight leg boosters
    • Same baseplate as a 750 but has 1/8” smaller venturies
    • Choke horn/tower removed for increased flow
  • Holley 0-1850C 4160 Street 600 CFM 4 Barrel Carburetor, Manual Choke
    Holley 0-1850C 4160 Street 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Holley's Model 4160 four barrel carburetors are designed for budget minded enthusiasts and are calibrated for use on stock to mildly modified engines. These classic Holley 4 barrel carbs features all metal parts and vacuum secondaries. They have a universal throttle lever and power valve blow-out protection. Dichromate finish for corrosion resistance and a traditional, period look.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Manual choke
    • Single feed fuel inlet
    • Side hung float bowls
    • Power Valve Blow-Out Protection
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance
    • “Next Gen” needle & seat design eliminates the need for external float level adjustment

    Holley 600 CFM 4 Barrel Carburetor Installation Insturctions (PDF)

  • Holley 0-80457SA 4160 Alum Street 600CFM 4 Barrel Carb, Electric Choke
    Holley 0-80457SA 4160 Alum Street 600CFM 4 Barrel Carb, Electric Choke
    x
                

    Holley's new Model 4160 600 CFM aluminum street four barrel carburetor is constructed from aluminum, which compared to its zinc counterpart equates to a weight savings of over 5 lbs. The new aluminum will hold its shine and can also be hand polished for a custom look.

    • Vacuum secondaries allow use on wide variety of vehicles
    • Electric choke for easy warm up
    • Single feed fuel inlet
    • Calibrated for excellent street performance
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • 1 timed (spark) port, 1 full vacuum, and 1 PCV port
    • Performance upgrade for stock to mildly modified vehicles
    • Universal calibration for easy bolt-on performance

    Holley 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Holley 0-80541-1 HP Crate Racing 650 CFM 4 Barrel Carburetor
    Holley 0-80541-1 HP Crate Racing 650 CFM 4 Barrel Carburetor
    x
                

    Race ready right out of the box! Part of Holley's 4150 HP Series, this gasoline 650 cfm four barrel carb is NASCAR crate engine approved for use in Late Model classes. It has progressive mechanical secondaries, contoured venturi inlets, screw-in air bleeds, high-flow metering blocks, non-stick gaskets, lightweight slotted mixture screws, center-hung Dominator-style fuel bowls, and other great features.

    • Contoured Venturi entry angles and symmetrical venturi bores
    • Screw-in air bleeds for precision tuning
    • High flow metering blocks
    • Viton® Non-stick gaskets
    • Lightweight slotted misture screws for tuning stability
    • Four corner idle system
    • Stainless steel throttle plates
    • Button head throttle plate screws for superior airflow
    • Center hung Dominator style fuel bowls
    • Power valve blow-out protection
    • 100% wet flow tested and calibrated
    • Progressive mechanical secondaries
    • Double 30cc accelerator pumps
    • Venturii size: 1.25"
    • Throttle bore: 1.688"

    Holley 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Three Chrome 9 Super 7   Carbs to 4 Barrel Intake Adapter, Complete Kit
    Three Chrome 9 Super 7 Carbs to 4 Barrel Intake Adapter, Complete Kit
    x
                Please view the product's page for more information
            
  • Three Plain 9 Super 7   Carbs to 4 Barrel Intake Adapter, Complete Kit
    Three Plain 9 Super 7 Carbs to 4 Barrel Intake Adapter, Complete Kit
    x
                Please view the product's page for more information
            
  • Willys Carbs WCD80541-E85 GM 602 Crate Motor 4 Barrel Carb, E85
    Willys Carbs WCD80541-E85 GM 602 Crate Motor 4 Barrel Carb, E85
    x
                

    If you are running the GM 602 crate motor, you need one of these Willy's four barrel carburetors. They are specifically built and dyno tuned to give you maximum power from your crate engine. 

    • Standard metering blocks
    • Based on a 650 body, flows between 800-850 CFM
    • Straight leg boosters
    • Same baseplate as a 750 but has 1/8” smaller venturies
    • Choke horn/tower removed for increased flow
  • Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners.  This chrome plated steel 4 barrel (5-1/8" neck) air cleaner has a 14" diameter and 2" tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.  This easy to install air cleaner comes with mounting hardware and PVC smog fitting.

    Chrome Deep Dish Performance Air Cleaner

    • Chrome plated steel
    • 14" diameter and 2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Holley 37-1541 Performance Carburetor Renew Rebuild Kit
    Holley 37-1541 Performance Carburetor Renew Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    • Serves all Holley Performance Carburetors
    • Genuine Holley quality parts
    • Extra parts for performance tuning
    • Step-by-step instructions
    • Detailed tuning guide
    • Packaging also parts tray
    • Includes:
      • Gaskets
      • O-Rings
      • Pump Diaphragm
      • Needle & Seat
      • Power Valve 
      • Step-By-Step Instructions
      • Detailed Tuning Guide

    427371541 Carb Rebuild Manual (PDF)

    427371541 Carb Exploded View (PDF) 

    427371541 Carb Kit Specifications (PDF) 

  • 6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb, 2-5/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb, 2-5/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 2 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 2 barrel carbs with 2-5/8" neck
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

    Does not fit 1968 and later cars equipped with factory air temperature control valve.

  • Two Plain 9 Super 7   Carbs, Offenhauser 1075 Dual Intake, 1949-53 Ford V8
    Two Plain 9 Super 7 Carbs, Offenhauser 1075 Dual Intake, 1949-53 Ford V8
    x
                

    This kit uses the Offy Dual '49-'53 Flathead Ford intake with Speedway's 9 Super 7® carbs. It includes two carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. 

    Said to be its most popular flathead intake, Offenhauser’s 2x2 Regular intake has closely spaced carbs that will clear the stock generator. The Offy regular dual intake accepts two 3-bolt carbs. Great addition to a street oriented engine. Has 4-3/4" carb centers.

    The 9Super7® makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Be sure to include the Secondary 9 Super 7 when installing 3-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb

  • Three 2 Barrel Carbs to 4 Barrel Intake Adapter
    Three 2 Barrel Carbs to 4 Barrel Intake Adapter
    x
                

    Want the race-ready looks of a tri-power setup but don't want to buy a new manifold?  Adapter that allows you to put three two barrel carbs on a four barrel intake. Accepts vintage 3-bolt Stromberg, Ford, and Holley carbs as well as the Demon 98 and Speedway 9 Super 7.

    Use linkage kit 135-6714 with Demon 98.

    Use linkage kit 135-6715 with others.

  • Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    x
                Please view the product's page for more information
            
  • 1 Inch Aluminum Open Carburetor Spacer
    1 Inch Aluminum Open Carburetor Spacer
    x
                

    Carb spacers are a quick & easy way to improve the performance of your engine. Spacers lengthen the intake plenum increasing it's volume, and speeding up flow. This cast aluminum 1" tall open carb spacer has dual bolt patterns, so it will work with Holley, Demon, Edelbrock, Autolite, and Carter AFB carburetors. Includes two gaskets and hardware. 

    • Open center port
    • Universal 4 barrel carbs
  • Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    Holley 37-119 Model 4160 4 Barrel, 600 CFM Carb Rebuild Kit
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    For Holley 600 CFM electric choke, side hung float bowl.

    • Gaskets
    • O-Rings
    • Pump Diaphragm
    • Needle & Seat
    • Power Valve 
    • Step-By-Step Instructions
    • Detailed Tuning Guide
    427-37119 Instructions (PDF)
  • R2C CS10503 Track Control Carburetor Spacer, 1.125 Inch Bore
    R2C CS10503 Track Control Carburetor Spacer, 1.125 Inch Bore
    x
                When you get beat out of corners on slick tracks,  it may not be the skill of the other driver that's doing that to you!   Many of these teams are now relying on Track Control spacers from R2C  for a smooth application of power.

    For the days when getting a grip on a dicey track presents problems for even the best Late Model and Modified teams, R2C Track-Control carburetor spacers help solve the problem by applying smooth and consistent power to get you to the front. Take the edge off when driving out of corners and plant the power rather than blowing the tires off!

    Holley 4150 Track-Control spacers are designed to limit power production and control torque by reducing bore size from 1.75" to 1.125". Track-Control
    4 barrel carburetor spacers are 1" tall and designed to maintain perfect A/F quality and booster signal. The venturi shaped profile also helps control reversion while the phenolic construction provides outstanding strength and helps control carburetor temperatures.
    • 1 Inch Thick
    • 4-Hole Holley design
    • Designed to limit power production and control torque by reducing bore size from 1.75" to 1.125"
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8