Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1 aluminum spacers" Page 1 of 5

  • JOES Racing Products Racing Aluminum Steering Wheel Spacers
    JOES Racing Products Racing Aluminum Steering Wheel Spacers
    x
                

    Don't you wish the steering wheel was just a little bit closer? Driver comfort is essential to winning races! When the steering wheel is too far away from the driver early fatigue sets in. Fix it with JOES light weight steering wheel spacers. 1/2", 1", 1-1/2" or 2" thick spacers available. Specify length required.

    • Driver comfort is essential to winning races!
    • When the steering wheel is too far away from the driver, early fatigue sets in
    • Fix it with JOES lightweight steering wheel spacers
    • Available in 1/2", 1", 1-1/2" or 2" thicknesses
    • Black anodized aluminum
    • Choose your desired spacer length
  • Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    x
                

    Lokar's throttle pedal spacer is designed for use if the throttle pedal and mounting base need to be mounted further away from the firewall.  They are made specially for Lokar's billet aluminum floor mount Eliminator throttle pedals.

    • 1/2" Thick
    • Designed for extra clearance
    • Quality steel construction
    • For billet aluminum floor mount Eliminator throttle pedals

    Instructions (PDF)

  • Universal Billet Aluminum Wheel Spacer, 1 Inch
    Universal Billet Aluminum Wheel Spacer, 1 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • Billet Aluminum Fan Spacers
    $21.99
    Product Rating: 4.30 Stars
    Billet Aluminum Fan Spacers
    x
                

    Precision machined billet aluminum. Includes bushing to fit both large (3/4") and small (5/8") pilot shaft Chevy water pumps. Five sizes available: 1", 1-1/2", 2", 2-1/2" and 3". 

    • Bolts included
    • Lightweight billet 6061-T6 aluminum construction
    • Anodized black

    Note: This adapter contains two bolt patterns for both the long style and short style Chevy water pumps: 2-5/32" and 1-3/4".

  • Mini-Sprint Axle Spacers
    From: $5.99
    Mini-Sprint Axle Spacers
    x
                CNC 6061 aluminum double flange spacers with radius cut to reduce rotating weight. Fit 1 ¾” axles. Available sizes: .150”, ¼”, ½”, ¾”, 1”, 1.180”, 1 ½”, 2”, 2 ¼”, 2 ½”, 2 ¾”, 3”, 3 ¼”, 3 ½”, 3 ¾”, 4”, 5”. 
            
  • 1 Inch Aluminum Open Carburetor Spacer
    1 Inch Aluminum Open Carburetor Spacer
    x
                

    Carb spacers are a quick & easy way to improve the performance of your engine. Spacers lengthen the intake plenum increasing it's volume, and speeding up flow. This cast aluminum 1" tall open carb spacer has dual bolt patterns, so it will work with Holley, Demon, Edelbrock, Autolite, and Carter AFB carburetors. Includes two gaskets and hardware. 

    • Open center port
    • Universal 4 barrel carbs
  • MPD Racing 087200-36 Midget Axle 36 Spline Spacer Kit-Aluminum, Sprint
    MPD Racing 087200-36 Midget Axle 36 Spline Spacer Kit-Aluminum, Sprint
    x
                

    MPD Racing's new Midget Axle Spacer System utilizing a split cone spacer allows you to move the wheel in or out without going to your jack handle looking for the right size spacer. Once you have the spacing correct, you simply move the existing spacers from the inside of the wheel to the center of the split cone or vise versa.

    Kit includes the following:

    • Split cone
    • Two of the 1/4" spacers
    • Four 1/2" spacers

    Note: Most cars will require an additional spacer between the system and the birdcage

     

  • Aluminum Fan Spacers with Bolts
    Aluminum Fan Spacers with Bolts
    x
                Aluminum fan spacers are required for maximum air transfer.  Fan should be 2" - 4" from radiator.  Spacers available from 1/2" to 2-1/2" thick in 1/4" increments.  Complete with bolts.  Fits 5/8" shaft. 
            
  • Aluminum 6-Pin Wheel Spacer
    $9.99
    Aluminum 6-Pin Wheel Spacer
    x
                            Lightweight design, 6 pin sprint wheel spacer. Available in 1/8", 1/4", 3/8", or 1/2" thickness.             
            
  • Universal Billet Aluminum Wheel Spacer, 1/2 Inch
    Universal Billet Aluminum Wheel Spacer, 1/2 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • MPD Racing 087200-31 Midget Axle 31 Spline Spacer Kit-Aluminum, Sprint
    MPD Racing 087200-31 Midget Axle 31 Spline Spacer Kit-Aluminum, Sprint
    x
                

    MPD Racing's new Midget Axle Spacer System utilizing a split cone spacer allows you to move the wheel in or out without going to your jack handle looking for the right size spacer. Once you have the spacing correct, you simply move the existing spacers from the inside of the wheel to the center of the split cone or vise versa.

    Kit includes the following:

    • Split cone
    • Two of the 1/4" spacers
    • Four 1/2" spacers

    Note: Most cars will require an additional spacer between the system and the birdcage

  • TI64 6081 Aluminum 1/2 Inch i/d x .400 Inch Thick Spacer
    TI64 6081 Aluminum 1/2 Inch i/d x .400 Inch Thick Spacer
    x
                These aluminum spacers are perfect for use on any Sprint racing chassis. 
    • 1/2" i/d x .4" thick machined aluminum
  • 1 Inch Steering Wheel Spacer
    $19.99
    1 Inch Steering Wheel Spacer
    x
                

    Don't you wish the steering wheel was just a little bit closer? Use this 1" thick aluminum spacer to do just that. For common three-bolt steering wheels.

    • Bolts extend 1/4" past the spacer when inserted
    • Mounting holes to column are on a 1.5" bolt center spacing
    • Mounting holes for wheel are on a 1.5" bolt center spacing
    • Steering wheel holes are threaded 1" (all the way through) and are 5/16"-18 or 1/4"-20
    • Center hole is unsplined
    • O.D. is 3-1/4"
  • Aluminum A-Arm Spacers
    From: $5.99
    Aluminum A-Arm Spacers
    x
                Aluminum A-arm spacers for use in setting camber or changing a-arm length for camber gain and roll center changes. Available in 1/8", 3/16", 1/4", 3/8", and 1/2" thickness.  

    Spacers only apply to a control arm using a bolt mount spacing of 6" on center.
  • Universal Water Pump Shim Kit
    Universal Water Pump Shim Kit
    x
                

    Water pump pulley shim kit provides proper drive belt alignment with pulleys.  Kit contains two aluminum 1/16" spacer and one 1/8" spacer.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump

  • Eagle Motorsports Shock Spacer Sleeve
    Eagle Motorsports Shock Spacer Sleeve
    x
                Eagle Motorsports factory-built component. Aluminum spacer allows for full mobility of the front shock and works with any flat surface to provide 1" extra clearance.
    • Standoff for front shock tower
    • Allows full mobility of shock
    • Mates to any flat surface
    • Overall Lenght: .96"
    • Overall Diameter: 1.00"
    • Aluminum
    • Natural finish
    • Works perfect with Eagle aero shock towers (940-3762-SIDE)
  • Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    Moroso 63510 Water Pump Spacer Small Block Chevy & 90 Degree V6
    x
                

    Convert '55-'68 Small Block Chevy water pumps to the longer, late model design. Bolts included. Spacers are 1-1/4" thick.

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • Sure Seal O-Ring Air Cleaner Spacer
    From: $4.99
    Product Rating: 5.00 Stars
    Sure Seal O-Ring Air Cleaner Spacer
    x
                

    This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.

    Available in three heights: 1/2", 1" or 2".

  • Universal Billet Aluminum Wheel Spacer, 1/4 Inch
    Universal Billet Aluminum Wheel Spacer, 1/4 Inch
    x
                

    Each billet aluminum wheel spacer fits 4-1/2", 4-3/4" and 5" bolt patterns. Must be used with 5/8" wheel studs to keep them properly centered.

  • 16-Piece Heim Joint Rod Ends Spacer Kit, 1/2 Inch, Black
    16-Piece Heim Joint Rod Ends Spacer Kit, 1/2 Inch, Black
    x
                These machined aluminum spacers offer clearance for rod ends.  They come in a black anodized finish and are great for use with tie rod, drag link, rear shocks, and pitman arm applications.  Kit includes (8) 1/4", (4) 1/2", (2) 3/4" and (2) 1". 
    • Now in black
    • Use these 1/2" I.D. spacers to allow rod ends to swivel
    • Great for tie rod, drag link, rear shocks and pitman arm
    • Four lengths include: (8) 1/4", (4) 1/2", (2) 3/4" and (2) 1"
  • Coil-Over Shock Mount Support
    From: $12.99
    Product Rating: 4.39 Stars
    Coil-Over Shock Mount Support
    x
                

    Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

    • Billet aluminum
    • 4-1/2" from base of head to end of threads
    • 1-1/4" shock mount base
    • Safely mounts to brackets 1/2" thick
    • Includes required washers and nylon lock nut
    • Mounts sold individually

    916-36010 Instructions (PDF)

  • Sure Seal Air Cleaner Assembly, 14 Inch
    Sure Seal Air Cleaner Assembly, 14 Inch
    x
                

    Speedway's Sure Seal Housing is manufactured from spun aluminum with an O-ring seal. Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4".

    Includes air cleaner assembly, a spacer with an O-ring on the carburetor side (choose height), and a 1/4"-20 air cleaner stud.

  • 1968-81 Performance GM TH350-TH400 Torque Converter-2200-2600 Stall
    1968-81 Performance GM TH350-TH400 Torque Converter-2200-2600 Stall
    x
                

    Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your GM TH350 or TH400. With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible. Made in the U.S.A.

    • For Turbo 350 or Turbo 400 transmission applications
    • 2200-2600 stall - 12" diameter 
    • 1968-'81 GM - 10-3/4" bolt circle

    All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

    Note: These converters will work with TH400 transmissions only if a dual bolt pattern flywheel is used.

    Instructions (PDF)

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter.

  • High Rise Aluminum 1 Inch Carb Spacer
    High Rise Aluminum 1 Inch Carb Spacer
    x
                

    The High Rise Aluminum Spacer is 1" thick with an open chamber for Quadra-Jet Carburetors. Comes with gaskets and hardware.

    • Open center design
    • Fits 4 barrel Quadra-Jet Carbs
  • Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    Holley Aluminum 1 Inch Carburetor Spacer, 4-Hole
    x
                

    These Holley 4 Hole Spacers have a 1" rise and fit Holley 4150 and 4160.  Aluminum construction. Comes with gaskets and mount studs. Hole size tapers from approximately 1.65" to 1.71".

    • Tapered 4-hole design
    • Fits 4 barrel Holley carburetors
  • Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    Gaerte Engines GEP 8001 Small Block Chevy Billet Aluminum Timing Cover
    x
                

    This billet aluminum timing cover for small block Chevys is both strong and lightweight. Cover fits SBC engines 1955-84 model years. Gaerte designed this cover for use in dirt late model racing applications but can be used in other forms of racing. 

    Add an adjustable timing pointer (sold separately) and you're good to go.

  • Speedway Aluminum Mandrel Spacer, 3 Inch
    Speedway Aluminum Mandrel Spacer, 3 Inch
    x
                Mandrel spacer to properly space and align the mandrel pulley pack. The spacers are machined from high quality 1-1/4" O.D. x .083" wall aluminum tubing for lightweight and strength.
            
  • 60 Piece 5/8 Inch Heim/Rod End Spacer Kit
    60 Piece 5/8 Inch Heim/Rod End Spacer Kit
    x
                

    Machined aluminum spacer offers clearance for rod ends. Kit has 5/8" ID and 7/8" OD dimensions. Kit includes six different lengths all separated in a six compartment storage box.

    Kit Includes:

    • 10 - 1/8" long 
    • 10 - 3/16" long
    • 10 - 1/4" long
    • 10 - 1/2" long
    • 10 - 1" long
    • 10 - 1-1/4" long

     

  • JOES Racing Products 14220 Tapered A-Arm Cross Shaft Spacer, 1/16 Inch
    JOES Racing Products 14220 Tapered A-Arm Cross Shaft Spacer, 1/16 Inch
    x
                

    Adjust caster without putting your A-arms in a bind with these tapered A-arm spacers from Joe's Racing Products. The slotted one-piece design lets you change camber without removing the A-Arm bolts. Machined out of aluminum, anodized and laser engraved.

    These control arm cross shaft shims are built on 6" centers with 1/16" tapers.

  • JOES Racing Products 14240 Tapered A-Arm Cross Shaft Spacer, 1/4 Inch
    JOES Racing Products 14240 Tapered A-Arm Cross Shaft Spacer, 1/4 Inch
    x
                

    Adjust caster without putting your A-arms in a bind with these tapered A-arm spacers from Joe's Racing Products. The slotted one-piece design lets you change camber without removing the A-Arm bolts. Machined out of aluminum, anodized and laser engraved.

    These control arm cross shaft shims are built on 6" centers with 1/4" tapers.

  • JOES Racing Products 14230 Tapered A-Arm Cross Shaft Spacer, 1/8 Inch
    JOES Racing Products 14230 Tapered A-Arm Cross Shaft Spacer, 1/8 Inch
    x
                

    Adjust caster without putting your A-arms in a bind with these tapered A-arm spacers from Joe's Racing Products. The slotted one-piece design lets you change camber without removing the A-Arm bolts. Machined out of aluminum, anodized and laser engraved.

    These control arm cross shaft shims are built on 6" centers with 1/8" tapers.

  • Aluminum Cone Spacers for Rod Ends, 1/2 Inch
    Aluminum Cone Spacers for Rod Ends, 1/2 Inch
    x
                These aluminum tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
            
  • Wilwood 270-2189C Aluminum Wide 5 Wheel 2 Inch Spacer
    Wilwood 270-2189C Aluminum Wide 5 Wheel 2 Inch Spacer
    x
                

    Wilwood's unique 2" offset aluminum Wide 5 Wheel Spacer utilizes a radical triangulated design to achieve maximum strength and rigidity. This race proven wheel spacer is lighter than any other on the market. Available with coarse 5/8" studs, Wilwood's 4.1 pound spacer gives greater flexibility in chassis setup while keeping rotating weight to a minumum.

    • Weighs 4 lbs.
    • Aluminum alloy 2" spacer
    • 5/8" coarse quick-start studs
  • Aluminum Wide 5 Wheel Spacers, 1 Inch, Set/5
    Aluminum Wide 5 Wheel Spacers, 1 Inch, Set/5
    x
                
    • Made of strong, lightweight 6061 T6 aluminum
    • A must for all late model racers
    • Fits 5/8" coarse wheel studs
    • Threads on to insure that they will not accidentally come off during a wheel change
    • Large 1-3/4" outside diameter
    • Black anodized finish
    • For Wide 5 aluminum hub applications only
  • Aluminum Wide 5 Wheel Spacers, 1/2 Inch, Set/5
    Aluminum Wide 5 Wheel Spacers, 1/2 Inch, Set/5
    x
                
    • Made of strong, lightweight 6061 T6 aluminum
    • A must for all late model racers
    • Fits 5/8" coarse wheel studs
    • Threads on to insure that they will not accidentally come off during a wheel change
    • Large 1-3/4" outside diameter
    • Black anodized finish
    • For Wide 5 aluminum hub applications only
  • AFCO Billet Aluminum Wheel Spacer, 1 Inch Thick
    AFCO Billet Aluminum Wheel Spacer, 1 Inch Thick
    x
                
    • Fits 4-1/2", 4-3/4" and 5" bolt patterns
    • Use 5/8" wheel studs to keep them properly centered
  • 1965-91 GM TH400 Performance Torque Converter, 2200-2600 Stall
    1965-91 GM TH400 Performance Torque Converter, 2200-2600 Stall
    x
                

    Races are won or lost at the starting line, so make sure you come out ahead with a High Performance Turbo 400 Torque Converter. Whether you are looking for a street, strip, racing, or just plain heavy duty converter, these units will deliver lasting performance in your GM TH400 (with 11-1/2" bolt circle). With features like welded internals, oversized bearings, and hardened hubs, you can rest assured that these torque converters are of the highest quality possible.

    • 2200-2600 stall - 12" diameter 
    • 1965-'91 GM Turbo 400 - 11-1/2" bolt circle

    All stall ranges will vary depending on the engine setup, vehicle weight, and gear ratios.

    High stall converters are designed for S/B or B/B cars with performance camshafts and high ratio rear end gears (3.55-3.73 minimum).

    Made in the U.S.A.

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

  • Winters Performance 3558 10 Piece Axle Spacer Kit
    Winters Performance 3558 10 Piece Axle Spacer Kit
    x
                This axle spacer Kit includes:

    • Two .750" unsplined spacers
    • Two .375" unsplined spacers
    • Two 1.00" splined spacers
    • One 2.00" splined spacers
    • One .750" tapered & splined spacer
    • One 1.50" tapered & splined spacer
    • One 2.00" tapered & splined spacer
  • 16 Piece Spacer Kit, 3/8 Inch
    16 Piece Spacer Kit, 3/8 Inch
    x
                Machined aluminum spacer offers clearance for rod ends.  Kit includes 8-1/4", 4-1/2", 2-3/4", and 2-1". 
            
  • 2.3 Ford 2 Barrel 1-1/2 Inch Carburetor Spacer
    2.3 Ford 2 Barrel 1-1/2 Inch Carburetor Spacer
    x
                

    This 1-1/2" billet aluminum carb spacer bolts to your 2.3 Ford intake and accepts a 350 or 500 Holley 2 bbl.

    This is the spacer only. Gaskets or studs are not included. This spacer is designed to be used on the 2.3L Ford after removal of the EGR adaptor plate.

    The bolt pattern on this part is 5 1/8" x 3 1/2."

Goto Previous PagePrevious Page
1 2 3 4 5