Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1 4 inch assembly" Page 1 of 9

  • Quarter Master 308500 Clutch Cover Assembly, 3 Disc, 7.25 Inch V-Drive
    Quarter Master 308500 Clutch Cover Assembly, 3 Disc, 7.25 Inch V-Drive
    x
                

    Clutch Cover Assembly 3 Disc 7.25" V-Drive from Quarter Master.

    Replacement cover for Quartermaster 7.25" V-Drive 3 disc clutch cover 
    (910-25530 or 910-398158)

  • Extra 1-3/4 Inch Tubing for Roll Cage
    Extra 1-3/4 Inch Tubing for Roll Cage
    x
                

    All street stock roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. Tubing is pre-notched where needed for easy assembly. Some notching is still required.

    We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage!

    The kit also includes: 

    • 1-3/4" diameter .104 wall HREW 1020 mild steel tubing
    • Some notching is required
    • Instructions

     

  • Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    Sweet Mfg Chrome Steering U-Joint, 3/4 Inch DD to 3/4 Inch DD, Universal
    x
                

    Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.

    • Full compliment bearings
    • Forged Vanadium steel yokes and u-joint
    • Highest quality for racing
    • Features needle bearing u-joints
    • 1.354" not including the screws (1.534" including), width on the u-joint.
    • 1.125" OD on the ends not including the nut (1.345" including the nut). 

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

    Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

  • 6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • 3-3/4" tall from the base to the highest point on the top.
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

     

  • DEi 050320 Boom Mat Speaker Baffle, 5-1/4 Inch Round
    DEi 050320 Boom Mat Speaker Baffle, 5-1/4 Inch Round
    x
                Please view the product's page for more information
            
  • Wheel Center for Stock Car 15 Inch Steel Wheel, 5 on 4-1/2
    Wheel Center for Stock Car 15 Inch Steel Wheel, 5 on 4-1/2
    x
                

    Whether you’re restoring a vintage circle-track car or just need to create a special wheel offset, Speedway offers separate steel wheel centers and rims for building custom wheels. Centers have a 12-5/8" O.D. and fit 15" shells.

    • Strong 1/4” stamped steel construction for racing use
    • Bare finish can be painted after assembly
    • Welding is required to complete the wheel assembly

    Learn more about determining the proper wheel offset, torque sequence, and bolt pattern for your application by reading our tech article. Racing Wheel Principles.

  • Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in plain steel.

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29-1/4" eye-to-eye Super Glide spring, 1-3/4" wide
    • All hardware for assembly
  • Sure Seal Air Cleaner Assembly, 14 Inch
    Sure Seal Air Cleaner Assembly, 14 Inch
    x
                

    Speedway's Sure Seal Housing is manufactured from spun aluminum with an O-ring seal. Fits Holley carbs. Uses standard 14" diameter filters, sold seperately. Minimum filter height required is 4".

    Includes air cleaner assembly, a spacer with an O-ring on the carburetor side (choose height), and a 1/4"-20 air cleaner stud.

  • Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    Bendix Style Emergency Brakes for 1937-48 Ford Rear, 12 x 1-3/4 Inch
    x
                

    If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies come complete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.

    These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on 5-1/2" bolt circle which are impossible to find elsewhere.

    • Wheel Cylinder Inlet:  7/16"-24 IFF
      • To connect an AN 3 hose, use (2) of 910-318-7/16"
      • To connect a 3/16" steel line, use (2) of 910-3183-7/16"
    • Bolt Pattern:  3-3/8" center to center both horizontal and vertically
    • Use with park brake cables typical of '39-'48 Ford passenger cars
  • K&N Filters 60-1290 Air Cleaner Assembly, 14 x 4 Inch
    K&N Filters 60-1290 Air Cleaner Assembly, 14 x 4 Inch
    x
                

    These 14" drop base air cleaners have a unique velocity stack design which drops 1-1/4" below carburetor flange. Each assembly features chrome plated top & bottom plates with 1/4" stud hole (stud not included). Also comes with rubber and steel mounting washers, but we recommend using SuperSeal gaskets 910-11101 for a complete seal.

    Fits 5-1/8" carb necks.

  • Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    x
                

    Triangulated 4-link rear suspension kit, including a Ford 9" rear end, specifically for the Speedway '32 Ford Boxed Truss frame 916-57050. This kit is a true bolt-in into our '32 Ford frame - no welding required. We suggest QA1 Adjustable rear coilovers 721-485 (at right) with 225 pound springs for this kit.

    • New 56" flange-to-flange Ford 9" housing with attached bracketry
    • New 31-spline high performance induction heat treated forged alloy steel axles
    • 3/4" 4-link bars (choose plain steel or polished stainless)
    • 4-bar rod ends with nylon bushings (polished stainless only)

     

    Triangulated Rear 4-Bar Installation Instructions (PDF) (Note: All axle brackets come welded to the housing - disregard welding requirements in instructions as it has already been completed.)

  • Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    Ti64 Titanium Shock Fastener Nuts, 3/4 Inch Hex with 1/2 Inch-20 Thread
    x
                

    The 3/4" hex with 1/2"-20 thread titanium half-heights are so light weight you have to try them; these are a Ti64 exclusive for Eagle Motorsports.  Fasten the shocks on your sprint and midget race car safely and securely with these quality hex nuts.

  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    916-39506 Instructions (PDF)

    Front Axle/Suspension Tech Tips (GIF)

  • QA1 Adjustable 14 Inch Coil-Over Shock Kit
    QA1 Adjustable 14 Inch Coil-Over Shock Kit
    x
                Please view the product's page for more information
            
  • 1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
    x
                

    These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

    1-1/2 Inch Aluminum Remote Fuel Filler Neck Flange Assembly 

    • O.D. of flange is 5-1/16"
    • 6 mounting holes on a 4.36" bolt circle
    • Filler neck is 1-1/2" O.D.
    • Includes mount ring, bolts and gasket

    This flange bolts to your fuel cell to permit attachment of a 1-1/2" I.D. filler hose. Aluminum construction.

  • 1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    1937-48 Ford Steering Arms, 1-3/4 Inch Drop
    x
                

    These 1-3/4" drop forged steel steering arms are popular on Model T - 1934 Fords with 4" dropped axles and four-bar or hairpin radius rod suspensions. Will attach to '37-'48 Ford spindles and accept 11/16" Ford "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.

    Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.

     Steering Arm Ends Guide (GIF)

     Cross Steering Guide (GIF)

  • AIRAID 700-470 Cone Air Cleaner Filter Assembly, 4 Inch Flange, 9 Inch Long
    AIRAID 700-470 Cone Air Cleaner Filter Assembly, 4 Inch Flange, 9 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 4"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 9"
  • AIRAID 700-539 Cone Air Cleaner Filter Assembly, 4 Inch Flange, 8 Inch Long
    AIRAID 700-539 Cone Air Cleaner Filter Assembly, 4 Inch Flange, 8 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 4"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 8"
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • Pump Frame Tube Clamp for 1-1/4 Inch Tube
    Pump Frame Tube Clamp for 1-1/4 Inch Tube
    x
                

    Pump Frame Tube Clamp for 1.250" Tube for FUELAB Prodigy pump.

  • Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 3" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also comes with mounting hardware and PVC smog fitting adapter.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 3 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Speedway Midget Axle Assembly for Spike Chassis
    Speedway Midget Axle Assembly for Spike Chassis
    x
                

    You get everything you need, but you do the assembly. Speedway's 45" 4130 front axle, steel king pins, aluminum spindles with seel snouts, aluminum steering arms, Winters direct mount hubs, LF brake bracket, LF aluminum brake rotor, rotor bolts, LF two piston caliper, brake pads, aluminum tie rod, aluminum heims, aluminum jam nuts, grade 8 bolt and nut kit.

    Radius rod brackets are 30 1/4 from center to center. 1 inch wide OD 5/8 inch ID with a half inch hole through them. 5 1/8" from king pin center to hole in tie rod end. 5 1/8" from king pin to first hole in steering arm 6 1/8th for the second hole. 

  • Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. This chrome plated steel 4 barrel carburetor air cleaner has a 14" diameter with a 4" tall paper filter element and fits carbs with 5-1/8" necks. This easy to install air cleaner also includes a tri-bar wing nut, a mount stud and an adaptor for the PCV inlet hose.

    1. This air cleaner has a "drop" base, meaning that the bottom of the air cleaner sits 1-1/4" below the top flange of the carb.
    2. The top of the air cleaner sits 2-5/8" above the top flange of the carb.

    Chrome Deep Dish Air Cleaner, 14 x 4 Inch, 4 Barrel Carb.

    • Chrome plated steel
    • 14" diameter and 3" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • stud and nut included
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 11-3/4" - 12-1/4" @ ride height
    • 14" extended, 10-1/8" compressed
    • Use 10" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • AIRAID 700-450 Cone Air Cleaner Filter Assembly, 3-1/2 Inch Flange, 6 Inch Long
    AIRAID 700-450 Cone Air Cleaner Filter Assembly, 3-1/2 Inch Flange, 6 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 3-1/2"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 6"
  • AIRAID 700-420 Cone Air Cleaner Filter Assembly, 3-1/2 Inch Flange, 9 Inch Long
    AIRAID 700-420 Cone Air Cleaner Filter Assembly, 3-1/2 Inch Flange, 9 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 3-1/2"
      • Base of filter - 6"
      • Top of filter - 4-5/8"
      • Length - 9"
  • Drilled Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    Drilled Model A to 1934 Ford 46 Inch I-Beam Axle Radius Rod Kit
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in plain steel.

    Each kit includes:

    • 46" kingpin-to-kingpin drilled I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29-1/4" eye-to-eye Super Glide spring, 1-3/4" wide
    • All hardware for assembly
  • AIRAID 700-469 Cone Air Cleaner Filter Assembly, 6 Inch Flange, 9 Inch Long
    AIRAID 700-469 Cone Air Cleaner Filter Assembly, 6 Inch Flange, 9 Inch Long
    x
                

    These universal air cleaner assemblies are designed to be used with AIRAID's performance intake air systems and come available in multiple sizes to best fit your application.

    • Multiple layers of defense against dirt:

    Every AIRAID® Premium Filter is hand-built using the finest materials available today.  AIRAID starts with multiple layers of cotton gauze combined with their  unique filtration technology resulting in a superior filtration system. All AIRAID® Premium Filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters can’t capture.

    • Lifetime Guarantee:

    All AIRAID® Premium Filters are built to last "for a lifetime" guaranteed. Each AIRAID® Premium Filter body is made from hand-poured urethane that won’t crack or shrink in the high-heat environment found under the hoods of today’s vehicles. Each AIRAID® Premium Filter is 100-percent washable and reusable and come with AIRAID's exclusive "No Hassle" Warranty.

    • Dimensions:
      • Flange - 6"
      • Base of filter - 7-1/4"
      • Top of filter - 5"
      • Length - 9"
  • Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Chrome
    Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Chrome
    x
                

    Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.

    Each kit includes:

    • 48" kingpin-to-kingpin I-beam axle, 4" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

  • 1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    x
                

    We stock those hard-to-find replacement brake rotors for your 1969-1972 GM midsize car. These rotors are specifically designed for the rigors of dirt track racing.  Drilled with a 5-on-4.75" bolt circle. Includes 7/16" fine quick-start wheel studs (installed).

    • 1969-1972 GM Midsize
    • 11 Inch Brake Rotor
    • 5 on 4-3/4 Inch
    • 7/16" fine studs installed
    • 11" diameter x 1"
    • IMCA Approved

    This rotor is designed for dirt track applications and should NOT be used for asphalt racing.

     

     

  • QA1 US304 Adjustable Shock and Coilover Kit w/o Spring, 11 Inch
    QA1 US304 Adjustable Shock and Coilover Kit w/o Spring, 11 Inch
    x
                Please view the product's page for more information
            
  • DEi 050321 Boom Mat Speaker Baffle, 5-1/4 Inch Round Slim
    DEi 050321 Boom Mat Speaker Baffle, 5-1/4 Inch Round Slim
    x
                Please view the product's page for more information
            
  • Speedway Pull Bar 1/4 x 3/4 Inch I.D. Spacer
    Speedway Pull Bar 1/4 x 3/4 Inch I.D. Spacer
    x
                Use spacers on your Speedway pull bars to adjust the assembly to where you need it. They are constructed of 1/4" thick steel for strength with  a painted black finish. 
            
  • AFCO 80127NPZ GM Pol. Performance Aluminum Radiator, 24-1/4 x 19 Inch
    AFCO 80127NPZ GM Pol. Performance Aluminum Radiator, 24-1/4 x 19 Inch
    x
                Please view the product's page for more information
            
  • AIRAID 100-255 Performance Airbox Housing, GM F Body Cars, Passenger Side, 4 Inch
    AIRAID 100-255 Performance Airbox Housing, GM F Body Cars, Passenger Side, 4 Inch
    x
                

    These performance airbox assemblies are designed to be used with AirAid systems to complete an updated air system for your classic muscle car.  These housings allow you to mount on the passenger side inner fender of most General Motors' F-Body vehicles.

    • 4" diameter filter flange
    • Works best with AirAid hose (178100400)
    • Passenger side mount
  • 1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    1932-34 Ford 4-Bar 46 Inch I-Beam Axle Kit for Ford Spindles, Plain Steel
    x
                Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 46" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles. 

    Each kit includes:

    • 46" kingpin-to-kingpin I-beam axle, 4" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 29" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9