Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"1 1 4 hose fitting" Page 1 of 13

  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Wing Slider Kevlar Hose Kit
    $59.99
    Wing Slider Kevlar Hose Kit
    x
                

    New kit supplies you with hoses and fittings to plumb your valve to your cylinder. Kit comes with two hoses, two 90 degree fittings for the wing cylinder, and four fittings for the valve.

    Due to variances in steering gears, you will have to pick out length of hoses you need for your pressure and return lines. Available in either braided or Kevlar. This kit fits most cars (Eagle, J&J, Maxim, etc.) utilizing an 8" or 10" stroke cylinder.

    Kevlar Slider Hose 940-1895

    • (2) 90° flare -4 to 1/8" NPT
    • (4) #4 flare to 1/8" NPT
    • (1) 24" kevlar line
    • (1) 38" kevlar line
  • 6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb, 5-1/8 Inch Neck
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners. They feature a recessed base and have a 6-3/8 in. diameter.  These air cleaners have a chrome plated steel housing with a paper filter element.

    6-3/8 Inch Chrome Air Cleaner, 4 Barrel Carb.

    • Chrome plated steel
    • 6-3/8" diameter and 2-1/2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • 3-3/4" tall from the base to the highest point on the top.
    • includes stud and wing nut
    • non-restricting flame retardant filter
    • unique sculptured design to fit most applications
    • performance engineered for increased breathing
    • designed to perform with today's large displacement engines

     

  • Flexible Radiator Hose Kit, 24 Inch
    From: $69.99
    Product Rating: 4.00 Stars
    Flexible Radiator Hose Kit, 24 Inch
    x
                

    Flexible stainless steel radiator hose will fit all applications. Unique design is non-corrosive and dissipates heat. Choose from chrome aluminum or polished aluminum ends.

    Kit includes:

    • One 1-3/4" diameter hose
    • Two aluminum end cap covers
    • Two rubber coolant hose sleeve adapters, 1-3/4" I.D.
    • Two 1-1/4" I.D. rubber reducers
    • Two 1-1/2" I.D. rubber reducers
    • Four hose clamps
  • Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    x
                

    These socketless chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb connector
    • 5/16" Hose to 1/4" NPT adapter
    • Straight angle
  • A/C Hose Kit
    $89.99
    Product Rating: 5.00 Stars
    A/C Hose Kit
    x
                

    These air conditioning hose kits include enough hose and fittings to allow a normal installation in applications without bulkhead fittings. 

    • (2) Band Clamps
    • (4) AN6 Straight
    • (1) AN8 Straight
    • (1) AN10 Straight
    • (2) AN6 90 Degree
    • (1) AN8 90 Degree
    • (1) AN10 90 Degree
    • (1) AN8 90 Degree with Service Port
    • (1) AN10 90 Degree with Service Port
    • (4) #6 O-Rings
    • (2) #8 O-Rings
    • (2) #10 O-Rings
    • (2) Grommets
    • 6 ft #6 Hose
    • 5 ft #8 Hose
    • 4 ft #10 Hose

     

    Fittings will need to be crimped at your local shop.

  • Diamond AC Bulkhead Plates with Fittings
    Diamond AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 2-1/2" x 4-1/2"

    You will need to have the fittings crimped on the hoses by your local shop.

  • Black Straight -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting
    Black Straight -6 AN Flare to 1/4 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fuel line hose connector
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb end
    • 3/8" Hose to 1/4" NPT adapter
    • Straight angle line connector

     

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/4" NPT
    • 90 Degree angle
  • Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    Gates 32948 Power Grip Hose Clamp, 1 3/4 Inch - 2 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    Currie 9+-98129 9 Inch Ford Cut-To-Fit 31 Spline Axle, 29 Inch
    x
                Please view the product's page for more information
            
  • Electric Power Master Cylinder - Disc/Drum
    Electric Power Master Cylinder - Disc/Drum
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. For disc/drum applications.

    104-10562 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod h
  • Electric Power Master Cylinders - Disc/Disc
    Electric Power Master Cylinders - Disc/Disc
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. Available for disc/disc or disc/drum applications.

    104-10564 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The

  • AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    x
                

    These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed.

    All measurements include the end tanks. Overall width includes mountings flanges if used.

    • 1-1/2" upper hose neck on the drivers side
    • 1-3/4" lower hose neck on the passenger side
    • 1/4" NPT brass drain cocks
    • Welded-on 2" wide side mount flanges on most models
    • Built-in fin covers on top and bottom of radiator
    • Do not have built-in transmission coolers
    • 10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow

    Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
    Currie 9+-98126 9 Inch Ford Cut-To-Fit 31 Spline Axle, 26 Inch
    x
                Please view the product's page for more information
            
  • Chrome 90   Adapter Fitting, 1/4 Inch Hose to 1/4 NPT
    Chrome 90 Adapter Fitting, 1/4 Inch Hose to 1/4 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 1/4" Hose to 1/4" NPT
    • 90 Degree angle
  • Straight Chrome Fitting, 1/4 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 1/4 Inch Hose to 1/4 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 1/4" Hose to 1/4" NPT
    • Straight angle
  • Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -6 AN to 1/4 Inch NPT
    Nickel Straight Flare to Aluminum Pipe Adapter Fitting, -6 AN to 1/4 Inch NPT
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight and feature a 37° sealing angle. 

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in nickel plated finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    Stainless Braided Hose Cover, 3/4 to 1-1/4 Inch O.D.
    x
                

    Use in conjunction with Tube Seal™ Hose Ends. Duplicates the appearance of far more expensive stainless steel braided hose and fittings. Fits over 3/4" - 1-1/4" O.D. hose.

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Air Conditioning Kit w/o Condenser
    Air Conditioning Kit w/o Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pickups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, compressor with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    428-100 Instructions (PDF)

  • Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    Blue Straight AN6 Flare Adapter to 1/4 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 1/4" pipe to straight -6 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -6 AN to 1/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
    x
                Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.

    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.

    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.

    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
    • Fits 1969-1994 GM Steering Weel
    • Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
    • 30" long
    • Beautiful Art-Deco styling
    • Polished Stainless steel
    • Turn signal, hazard light and horn functions
  • Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
    x
                This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.
            
  • Straight Chrome Fitting, 1/4 Inch Hose to 1/8 Inch NPT
    Straight Chrome Fitting, 1/4 Inch Hose to 1/8 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 1/4" Hose to 1/8" NPT
    • Straight angle
  • Chrome 90   Adapter Fitting, 1/4 Inch Hose to 1/8 NPT
    Chrome 90 Adapter Fitting, 1/4 Inch Hose to 1/8 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 1/4" Hose to 1/8" NPT
    • 90 Degree angle
  • Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    Stainless Thru-Frame Brake Line Fittings, 2-1/4 - 2-3/4 Inch
    x
                

    Use these 100% stainless steel fittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fits frame rails 2-1/4" to 2-3/4" wide.

    Sold in pairs.

  • Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    Currie 9+-98132 9 Inch Ford Cut-To-Fit 31 Spline Axle, 32 Inch Long
    x
                Please view the product's page for more information
            
  • Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    Stainless Braided Radiator Hose Cover, 1-1/4 to 1-5/8 Inch O.D.
    x
                Use in conjunction with Tube Seal™ Hose Ends.  Duplicates the appearance of far more expensive stainless steel braided  hose and fittings. Fits over 1-1/4" - 1-5/8" O.D. hose. 

    Sold in 6 ft. sleeves.

    Note: Coverage may vary on diameter on hose. 6 ft. of sleeving typically covers 4 ft of hose.
  • Wing Slider Braided Hose Kit
    $49.99
    Wing Slider Braided Hose Kit
    x
                New kit supplies you with hoses and fittings to plumb your valve to your cylinder. Kit comes with two hoses, two 90 degree fittings for the wing cylinder, and four fittings for the valve. 

    Due to variances in steering gears, you will have to pick out length of hoses you need for your pressure and return lines. Available in either braided or Kevlar. This kit fits most cars (Eagle, J&J, Maxim, etc.) utilizing an 8" or 10" stroke cylinder.

    Braided Slider Hose 940-1899

    • (2) 90° flare -4 to 1/8" NPT
    • (4) #4 flare to 1/8" NPT
    • (1) 26" braided line w/ 90° end
    • (1) 36" braided line w/ 90° end
  • Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    Gates 32941 Power Grip Hose Clamp, 1 1/2 Inch - 1 3/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • RapidAir M8024 Maxline Air Hose Union Fitting, 3/4 Inch to 1/2 Inch
    RapidAir M8024 Maxline Air Hose Union Fitting, 3/4 Inch to 1/2 Inch
    x
                

    RapidAir Maxline industrial compressed air piping systems are fast and easy to install. They feature leakproof, corrosion resistant fittings that are built to last.  These fittings connect 3/4" tubing to 1/2" tubing together at line breaks.  These air hose connectors work great for your workshop with applications from automotive to woodworking.

    • Ideal for connecting 3/4"hose to 1/2" hose for an increase or decrease in hose size
    • Nickel plated brass
    • Double o-ring design
    • Split ring allows disassembly
    • No expensive tools required
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Maxline Brochure (PDF)

    Maxline Installation Instructions (PDF)

    RapidAir Maxline Warranty (PDF) 

  • 4-1/2 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    4-1/2 Inch Chopped 1932 Lo-Boy Aluminum Radiator
    x
                

    Latest high efficiency core designed with Chevy-style outlets. Perfect fit with Lo-Boy grille shell and grille insert. Super duty, all aluminum construction is ideal for high compression or supercharged engines.

    • 2 rows of 1" furnace brazed cores
    • TIG welded brackets
    • Internal automatic transmission cooler
    • 1-1/2" upper inlet & 1-3/4" lower outlet
    • Height:  22-1/2"
    • Width:  17-1/2" w/o brackets
    • Thickness @ Core:  2-17/64"
    • Core:  16-1/4" W x 17-1/4" T
    • Trans Cooler Ports:  1/8"-27 NPT
    • Hose Nipple on Filler Neck:  5/16" O.D.
    • Accessory Port on Lower Tank:  1/2"-14 NPT
    • passenger side lower hose (1-3/4"), driver side upper hose (1-1/2")

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Aeroquip FBU0400 Starlite Hose, -4 AN
    Aeroquip FBU0400 Starlite Hose, -4 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 13