No items in Shopping Cart
These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use withfour-wheel discbrake systems.
If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1963-70 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with ...
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.
Kits for metric calipers. These basic kits include brackets, steel vented rotors, hats and bolts. Caliper brackets weld to 3" tube rearend. Hat fits 4-1/2", 4-3/4" and 5" bolt circle.
Kits with standard GM metric or oversized metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GMemergency brakecalipers, brake pads and hardware.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GMemergency brakestyle calipers, brake pads and hardware.
Steel rotor hat fits5on 4-1/2", 5on 4-3/4", and 5 on 5" bolt patternsand hasa 3" backspace.
Wilwood aluminumrotor hat fits5on 4-1/2", 5on 4-3/4", and 5 on 5" bolt patternsand has a1.94" backspace.
Looking for a low cost way to add rear disc brakes to your Ford 8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.
Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.
This is a non-emergency brake rear disc brake conversion. Replace those old drum brakes with modern rear disc brakes. Features lightweight, black anodized aluminum 4 piston calipers, black steel 11-1/2" diameter 0.350" thick rotors, anodized aluminum hats and caliper mounting brackets, brake pads, hardware and complete instructions.Big Ford.
Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Steel hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.
These rear disc brake kits allow you to simply bolt disc brakes on your9" Ford rearend. Includes two bolt-on caliper brackets, two vented rotors, two new GM Metric calipers and hardware.Has 5 x 4-1/2" bolt pattern.
Wilwood Forged DynalitePro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. Medium Duty kits are recommended for use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums.