No items in Shopping Cart
Our Deluxe Coil Spring kit includes a weld-on 25.5" Panhard bar, 2 coil springs (175 lb. rate, 14" tall, 4.5" O.D.), upper and lower spring mounts, two 32" steel radius rods with mounting brackets, and all hardware.
Dirtworks 2-link rear suspension kit comes with all of the brackets, nuts, pull-bars, and other components necessary to set up a robust rear suspension system on your IMCA modified racer.Kit includes: 3/4" Swedged Steel Tubes Two 2-Link Brackets Std 3/4" RH & LH Male Heims 9" Ford Torque Link Plates 9" Ford Panhard Bar Mount Rubber Bushing J Bar 5" x 4" Torque Link Spring Pull Bar w/o Spring 3/4" RH & LH Jam Nuts Frame Mount P-Hard Bar Spring Slider Only w/o Ends Std 1/2" RH Male Heims 1/2" ...
This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. It will come with everything that you'll need to set up your IMCA racers rear suspension.Kit includes:60" GN Housing 60" GN Axle GN 5 x 5" BP Hardware Swing Arms Birdcages for Swing Arms Swedged Tube for 5/8" Heims3/4" RH 5/8" Hole Pro 1 HeimsStd 5/8" RH & LH Male Heims Pull Bar Brackets Adjustable Pull Bar BoltPanhard Bar Bracket Swedged Tube for 3/4" Heim Std 3/4" RH & LH ...
Dirtworks 2-link rear suspension kit comes with allof the brackets, nuts, pull-bars, and other components necessary to set up a robust rear suspension system on your IMCA modified racer.Kit includes: LH 4-Bar U-Weld Birdcages 5/8" Swedged Steel Tubes 5/8" Swedged Steel Sleeves Std 5/8" RH & LH Male Heims 9" Ford Torque-Link Plates 9" Ford Panhard Bar Mount Rubber Bushing J Bar 5" x 4" Torque Link Spring Pull Bar w/o Spring Top Link Bushings & Washers Std 3/4" RH Male & Female Heims 3/4" RH & LH Jam Nuts ...
This kit is desgined for installing a new rear axle in your 1960-72 Chevy pickup (1/2-ton, coil-spring suspension only.) Requires minimal welding. Kit includes axle brackets & adjustable trac-bar.
There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems, and, insome cases, dangerous situations. When it comes to choosing coil springs,there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS.
Rubber coil spring spacer for increasing spring load.A quick way to increase spring rate for fast or rough tracks. Workswith 5" and 5.5" O.D. coil springs.
Use with 5" or 5-1/2" O.D. coil springs to increase effective spring rates. The amount of spring rate change will depend on the thickness of the rubber, the location of the rubber, and the type of spring being used.
-### at end of part number indicates rate. Suggested Spring Setup Chart
16" Free height, 5" O.D. ground flat on both ends. Specify rate. Suggested Spring Setup Chart