No items in Shopping Cart
Shouldered nut for fastening Lokar parking brake cables to brake backing plates when using Ford Explorer style rear disc brakes (like kit 91031998)
Lokar Clevis Kits adapt Lokar Emergency Brake Cable kits to Ford Explorer and Wilwood Explorer-style rear disc brakes with internal drum hubs (like our 910-31938). Also works with late Corvette rear disc brakes with internal shoe-type parking brake (requires some file-fitting).
If you want the early look but are reluctant to use old non-energizing drum brakes, we have just what you need. Our 100% new self-energizing backing plate assemblies comecomplete with shoes, wheel cylinders and hardware. Fits either the front or rear of 1937-48 Ford cars or 1937-47 Ford half-ton pickups with original style rear axle.These have provisions for an emergency brake cable. These brake assemblies can be used with Buick drums and 1948 Ford hubs, or we also offer new iron 12" x 2" brake drums (910-65400) with 5 on ...
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.
If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GM metric style calipers, brake pads and hardware.
Kits with standard GM metric or oversized metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle.
If you don't want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8" vented rotors, two GMemergency brakecalipers, brake pads and hardware.
For 3.25 mount caliper and 10" rotor. Steel.
US Brake weld-on brackets for GM single-piston iron calipers. Fits 3" axle tubes.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GMemergency brakecalipers, brake pads and hardware.
240 series. For 10" rotor only. Right rear and left rear. 3-1/4" mount.
Replace those old drum brakes with modern rear disc brakes. Steel rotor hat mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.
If you are using 1978-88GM Metric style brake calipers your choices of piston sizes are pretty much limited to 2-1/2". This isn't bad unless you want to 'tune' your braking by using different size calipers front to rear. By usinga larger 2-3/4" piston you will increase the braking force ata wheel over a wheel using a smaller piston.
Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. Steel hat fits 5 lug hubs with4-1/2", 4-3/4",or 5" bolt circle.