No items in Shopping Cart
Use these rear axle mounting brackets to attach any late model rear end to your 1935-1948 Ford frame. Use a 1935-1948 spring and your stock crossmember. Includes 2-1/4" shackles, weld-on brackets and instructions.
This kit linksyour rear axle to the Track-T frame mountsusing quarter elliptic springs, upper radius rods & aPanhard bar. Quarter elliptic springs not included in kit (sold separately). Builder can cut their own springs from a pair of factory leaves as well. For maximum performance, use Composite Quarter Elliptic Mono-Leaf Springs 974-49934 (at right).
Now you can have all the strength and serviceability benefits that the Ford 9" offers underneath your Fox Body Mustang. Currie Crate Rearends are built using the stock overall width, pinion offest, and mounting points of your original rear axle housing, making it a 100% bolt-in upgrade.
Now you can have the strength and serviceability that Ford drivers have enjoyed for years underneath your GM vehicle. Currie Crate Rearends are built using the stock overall width, pinion offest, and mounting points of your original rear axle housing, making it a 100% bolt-in upgrade.
Now you can have all the strength and serviceability benefits that the Ford 9" offers underneath your Mustang. Currie Crate Rearends are built using the stock overall width, pinion offest, and mounting points of your original rear axle housing, making it a 100% bolt-in upgrade.
Rear end oiling can mounts flush on rear deck. Aluminum, 24 oz. capacity. 7 1/2" tall, 3" diameter. Mounting flange is 8 1/2" diameter. AN 10 outlet.
Mounts a late model rear into a T-1931 Ford chassis when using a high-arch 2-1/4" wide spring (like 910-43102). Locates spring directly above the axle housing. Includes zinc plated shackles with nylon bushings, weld-on brackets, and instructions.
This kit linksyour rear axle to the'32 Lo-Boy frame mountsusing quarter elliptic springs, upper radius rods & aPanhard bar. Quarter elliptic springs not included in kit (sold separately). Builder can cut their own springs from a pair of factory leaves as well. For maximum performance, use Composite Quarter Elliptic Mono-Leaf Springs 974-49934 (at right).
Currie's Universal Hot Rod Ford 9" kit includes a brand new 56" housing, lifetime warranty 31 spline axles, new axle bearings and seals, and new style big Ford ends.
This all-new 9" Ford housing features big bearing ends (bearings included) and lifetime warranty 31-spline axles with dual bolt patterns (5 x 4.5" and 5 x 4.75"). Center sectionNOT included.
This housing will allow you to put the proven 9" Ford rear axle in your '78-'88 GM Metric chassis. This heavy duty housing has the 3-1/4" x .188 axle tubes and brackets, tig welded for superior strength.
Wilwood Dynaliterear brake kitscombine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.
This rear axle breather will stop lube from being flung out of rear axle housing. Allows "breathing" of rear axle assembly. 7/16"-20 thread. Polished!
Currie axle made to work in the 56" centered Speedway Motors Ford 9" rear housing (910-46110). Our matched axle to complete the set (910-46108). 26-3/8 inches long.Drilled for 5 on 4 1/2 and 5 on 4 3/4 bolt pattern.
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 56" from hub-to-hub. You will need one 26-3/8" long axle and one 28-5/8" long axle.
Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 56" from hub-to-hub. The pumpkin is centered in the housing, which puts the pinion offset 2-3/8" from center
"Long" rear axle bracket for use with custom radius rod rear suspensions.
Increased rigidity, superior material, and additional spline length make this axle the most versatile option available. 31 Spline.
All brackets are for 3" rear axle application.Low Rear Axle BracketMount radius rods lower than rear axle. 3/8" steel. 5-3/4" long. 3/8" holes.
Currie axle made to work in the 56" centered Speedway Motors Ford 9" rear housing (910-46100). Our matched axleto complete theset is part number 910-46109 (28-5/8" long).