Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Radius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch Hole

Radius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch HoleRadius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch Hole
Radius Rod/Four-Bar Frame Mounting Brackets, 1/2 Inch Hole

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel. 4-3/8 Inch Tall

NOTE: For use with spherical rod ends.

You may also be interested in:

Bolt-On Radius Rod Bracket
(Part #91635015)
                        These brackets bolt to the side of 1928 and up Ford frame rails. They also extend further down for cars with a spring-over-axle, or moderately dropped front suspension. Holes have a 7 degree taper for Ford 11/16" tie rods.
                    
Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
(Part #91635051)
                        Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

NOTE: For use with spherical rod ends.
Radius Rod Frame Mounting Bracket, Tie Rod
(Part #91635052)
                        

Weld these brackets to the underside of your low-ridin' Model T thru 1934 Ford frame rails for a simple, strong place to attach radius rods using 11/16” Ford style tie rod ends. Plain steel.

 

  • 4-3/8 Inch Tall
  • 7 Degree Taper 

 

Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 2-3/4 Inch
(Part #91635048)
                        Weld these brackets to the underside of your low-ridin' 'T' thru 1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.

NOTE: For use with spherical rod ends.
Aluminum Cone Spacers for Rod Ends, 1/2 Inch
(Part #5464108)
                        These aluminum tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.
                    
Pro-Blend 1720 Anti-Seize Compound
(Part #91016009)
                        

Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

  • Defies contact of dissimilar or like metals
  • Not affected by heat, moisture, salt water, or corrosion

Learn why using anti-seize is so important in our tech article, Installing New Hardware.