No items in Shopping Cart
Weld these brackets to the underside of your low-ridin' 'T' thru1934 Ford frame rails for a simple, strong place to attach 4-bars or radius rods. Plain steel.NOTE: For use with spherical rod ends.
Rear Panhard bars are used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. This unit is threaded on one end for adjustment. It will require that one end be unbolted for length adjustment. Available in plain finish or polished Stainless Steel.
Four barsuspensions allow your front axle to travel freely, thus providing better ride and handling than traditional radius rods. Plus, their polished stainless construction will keep your front end glowing forever! Speedway kitsfeature bat wings and tapped bar ends, complete with nylon rod ends. For axles with 2" or 2-1/4" boss - use spacers916-35003 if necessary.
One of John Thawley's books. An excellent beginners book. Plainly illustrates front suspension, bump steer, 4- bar versus hairpin radius rods, brakes etc. Other chapters deal with bodies and body work, upholstery, wiring, registration and insurance. Detailed manual. 91 pages.
Steel bracket attaches to axle with perch bolt. Plain steel finish.
91635052Overall Width7.670"Overall Height4.138"Overall Thickness0.177"Inside Diameter0.619"Material TypeSteelFinishNaturalSold in QuantityPair
Weld-on brackets attach spring or radius rods to 2" O.D. axles.
This front radius rod is ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. tubing is threaded 5/8" NF right hand at each end.These are designed to be used with bat wings or axle brackets with a 5" center to center bolt hole spacing on front tube or I-beam axles only. Not to be used for rear suspensions. Before installing the heim joints or clevis ends, the actual measurement will be center to center 4-1/2". The angle of the tube will increase the measurement to 5" after installing the end ...
Swedged 6061 aluminum steering, panhard and radius rods. 1" O.D., 5/8" NF threads. LH threads on one end. RH threads on the other end.
These front radius rodsare ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. chrome plated steel tubing is threaded 5/8"-18 NF right hand at each end.
These front radius rodsare ideal for smaller or full-fendered cars. Rugged, 7/8" O.D.polished stainless steeltubing is threaded 5/8"-18 NF right hand at each end.
These front radius rodsare ideal for smaller or full-fendered cars. Rugged, 7/8" O.D. brushed stainless steel tubing is threaded 5/8"-18 NF right hand at each end.
Speedway Curtis-style radius rods have a classic shape that's more distinctive than most hairpin-style designs, and now they're available in stainless steel! At 36" in length, theseare ideal for non-fendered street rods!
Speedways Radius Rod Tube axle kits are designed to fit '28-'31 Model Aand '32-'34 Fordframes. These tube axles require'37-'48Ford passenger car spindles. Kits are available in Plain steelor Chrome.
Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model Aand '32-'34 Fordframes. I-Beam axles require'37-'48Ford passenger car spindles. Kits are available in plain steel.