Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Rack & Pinion Mounting Bushing

Sold in Quantity:
Diameter Small End :
Diameter Big End:
Inside Diameter:
Bushing Material:
Works with both manual and power Pinto/Mustang II racks.
Rack & Pinion Mounting Bushing

Click image to enlarge



Q & A

What's in the Box

This rack & pinion mount bushing fits both power and manual Mustang II/Pinto racks.

Item Details

Sold individually - (2) needed per rack

You may also be interested in:

Mustang II and T-Bird Rack and Pinion Inner Tie Rod Extensions
(Part #91034345)

Inner tie rod extensions for Mustang II/Thunderbird-style steering racks. Includes boots and bands.  These inner tie rod extensions fit between the inner shaft of the rack and the pivot where the tie rod attaches. It moves the pivot out to align with the pivot on the lower control arm or the imaginary line between the upper pivot and the lower control arm pivot. In doing so it leaves the tie rod in plane with the lower control arm and preserves correct steering geometry.

The manual version does NOT have the holes for roll pins and Loctite is recommended. The power version is similar to the OEM and has 3 holes and include drift or roll pins for retention.

Manual version (MAN) fits

  • Flaming River manual racks
  • Maval manual racks

Power version (POW) fits

  • Mustang II power racks
  • 1982-88 Thunderbird power racks
Inner Tie Rod Extention Kit - Speedway Mustang II Manual Rack
(Part #91034346)

Inner tie rod extensions for Speedway manual racks. Includes boots and bands.

910-34346 Instructions (pdf)

T-Bird Offset Rack & Pinion Mount Bushings
(Part #91034342)

Allows the installation of a T-Bird rack & pinion with 15-1/2" center to center mounts to a crossmember built for a Mustang II with a 16" center to center mounting.

NOTE: These bushings are not designed to raise or lower the rack & pinion.

Mustang II Manual Rack Bolt Kit
(Part #91034342-2)
  • (2) 5/8"-11 x 3-1/2" coarse hex cap screw Grade 5
  • (2) 9/16" hardened flat washers
  • (2) 5/8"-11 nyloc nuts
  • (1) Instruction sheet
Mustang II Power Rack Bolt Kit
(Part #91034342-3)
  • (2) 5/8"-11 x 4-1/2" coarse hex cap screw Grade 5
  • (2) 9/16" hardened flat washers
  • (2) 5/8"-11 nyloc nuts
  • (1) Instruction sheet
Mustang II Outer Tie Rod End, Manual Version
(Part #91034316-MAN)

Outer tie rod and inner extension fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks.

  • 9/16"-18 R/H female thread
  • 3.40" long from stud centerline to end