No items in Shopping Cart
Chromoly body - 2 piece designDesigned for heavy duty applicationRough conditions steering/offroadBall - 52100 steel hard chrome plated Body - 4130 Chromoly
ASSEMBLY TIP:To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
91002106ThreadsRH MaleSold in QuantityEach
1/4" plated steel rod w/ r/h 1/4" male threads on both ends Includes carb bushings, 1/4" female rod ends, jam nuts, & rodNote: Extra-long thread allows more adjustment
These tie rod ends are just like our standard Ford 7 taper tie rod ends except they are made of beautifully chrome plated steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads.
These X-Series rod ends feature heat-treated, precision-ground, chrome-plated balls riding in self-lubricating, self-sealing Teflon/Kevlar compound.
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. Sorry, no custom order chrome sleeves. Measurements are in assembled eye-to-eye lengths.
Excellent for use as a medium-duty suspension rod endBall - case hardened steel hard chrome platedBody - Low carbon steel chromate treated
These tie rod or drag link kits are pre-cut and tapped lengths of 78" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7 tie rod ends and jam nuts. Adjustable from 1/2" shorter to 3/4" longer. All lengths measured eye to eye. Tapped right-hand & left-hand threads.
5464110Outside Diameter1.000"Inside Diameter0.625" (5/8")Overall Thickness0.250" (1/4")Material TypeSteelSold in QuantityBagNotes8 spacers per bag.
91002939Overall Length4.000"Center Hole to End of Shank3Stud Length0.750" (3/4")Stud Diameter0.500" (1/2")ThreadsRH FemaleThread Pitch11/16"-18Thread Length2.000"Material TypeStainless SteelFinishPolishedSold in QuantityEachNotesFit closer to tapered hole compared to our 91002919 which is.150" shorter. 1-1/8" from center of threaded shaft to the bottom of the taper.
Don't settle for a weak 4-bar end made out of a piece of tubing welded to a bolt. These Speedway rod ends come in eitherforged steel or fully polished investment cast stainless steel for superior strength and durability.
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.
These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available inmultiplelengths.Each kit comes complete with 5/8" heim joint rod ends and jam nuts. Adjustable 1/4" shorter to 1/2" longer. Always use anti-seize during final installation.
These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 78" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7 tie rod ends and jam nuts. Adjustable from 1/2" shorter to 3/4" longer. All lengths measured eye to eye. Tapped right-hand & left-hand threads.
91002929Center Hole to End of Shank3.250Degree of Taper7 degreeShank Diameter0.780"Shank Length2.500" (2 1/2")Thread Pitch11/16"-18Thread Length2.000"Material TypeStainless SteelFinishPolishedSold in QuantityEachNotesFit closer to the tapered hole in comparison to our plain tie rod 91002909 as they are .150" shorter.