(0)
Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Stainless Steering U-Joints - 3/4" Round

Price:$74.99
Click image to enlarge Click image to enlarge
No video at this time.
 

These polished stainless steel U-joints look & function beautifully. Some use a pinch bolt on each end for easy installation, while others use non-pinch bolts which will need to be either welded, cross-drilled and pinned or bolted.

Note: Photo is for display purposes only. Please refer to item descriptions for end configurations.

Spline Size (Link)

When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.

Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.

Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.

Reviews for Item #: 910420
Be the first to review this product. Write a Review
 

Questions and Answers for Item #: 910420

Get your questions answered by the community. Ask or answer questions below.

1 Question | 1 Answer
Displaying Questions
Processing

Q:

will the 3/4 shaft need to be groved for the pinch bolt to go thru

Asked on 7/6/2011 2:37:59 AM by dons body shop from urbana, ohio

Answers (1) Know the answer? Answer this question
Displaying Questions

Do you have a question about this product?

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
3/4" SMOOTH TO 3/4" SMOOTH STEERING U-JOINT
Price:
$74.99
EA
In Stock
Item #:
910420
Item Details:
Stainless Steel
Not a pinch bolt style u-joint
 
(0 Rating)
3/4" DD TO 3/4" SMOOTH BORE STEERING U-JOINT
Price:
$74.99
EA
In Stock
Item #:
910330
Item Details:
Stainless Steel
This u-joint contains a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.
 
(0 Rating)
9/16"-26 TO 3/4" SMOOTH BORE STEERING U-JOINT
Price:
$74.99
EA
In Stock
Item #:
910430
Item Details:
Stainless Steel
Not a pinch bolt style u-joint
 
(0 Rating)
3/4"-36 TO 3/4" SMOOTH BORE STEERING U-JOINT
Price:
$74.99
EA
In Stock
Item #:
910850
Item Details:
Stainless Steel
Not a pinch bolt style u-joint
 
(0 Rating)
Our Techs also Suggest the Following:
POL. S.S. 3/4" DD SHAFT
Item #:
91032377
 
(2 Ratings)